Skip to Content

陳朝光

personal pictures

名譽教授, 國家講座教授, 成大講座教授
姓名 陳朝光 (Chao-Kuang Chen)
組別 兼任教授
教授室 機械系館 91517
分機 62140
傳真機 06-2342081
電子信箱 ckchen@mail.ncku.edu.tw
個人網站 http://myweb.ncku.edu.tw/~ckchen/
學歷
  1. 英國利物浦大學 機械工程研究所 博士~ 1986
  2. 美國喬治亞理 工學院機械工程研究所 碩士~1970
  3. 國立成功大學 機械工程研究所 碩士~1964
  4. 國立成功大學 機械工程研究所 學士~1958
經歷
  1. 國立成功大學 機械工程學系 國家講座教授 1998/7~迄今
  2. 國立成功大學 機械工程學系 主任兼所長 1990/8至1993/7
  3. 國立成功大學 機械工程學系 實習工廠主任 1983/8至1986/7
  4. 國立成功大學 機械工程學系 副教授 1971/8至1976/7
  5. 國立成功大學 機械工程學系 講師 1966/10至1971/7
  6. 中國石油公司 高雄煉油廠 工程師 1960/4至1966/9
專長
  1. 熱流科學
  2. 分子動力學在機械工程上之應用
  3. 電磁流變流體在工程上之應用
  4. 微分幾何在機械工程上之應用和金屬切削刀具
  5. 非線性系統控制與混沌動力學
  6. 有限時間熱力學與熱經濟分析
  7. 灰色系統理論與可拓工程之應用
教師研究介紹
服務

 


  1. 現任中國機械工程學會理事長(2009年~迄今)。
  2. 現任中華民國灰色系統學會榮譽理事長(2002年~迄今)。
  3. 現任國際“Journal of the Chinese Society of Mechanical Engineers”期刊(SCI & EI)之Editor-in-Chief(1993年~迄今)。
  4. 現任國際“Int. J. of Heat and Mass Transfer”期刊之Honorary Editorial Advisory Board。
  5. 現任國際“Int. Comm. of Heat and Mass Transfer”期刊之Honorary Editorial Advisory Board。
  6. 現任國際“Numerical Heat Transfer”期刊(part A: Applications & part B: Fundamentals)之Honorary Editorial Advisory Board。
  7. 現任國際“Int. J. of Fuzzy System”期刊之Advisory Board。
  8. 現任國際Int. J. of Nonlinear Science and Numercial Simulation 期刊之Editor。
  9. 現任國際可拓工程學會副理事長。
  10. 現任中國機械工程學會理事。
  11. 現任中國模糊控制學會監事。
  12. 現任泛太平洋國家熱流工程中心組織評議委員(1985年~迄今)。
  13. 現任中國自動化學會監事(1997年~迄今)。
  14. 現任中國力學學會監事。
  15. 現任中國機械工程學會高雄分會理事。
  16. 現任教育部學審會委員。
  17. 經濟部中華民國“國家產品形象獎選拔”初,複選評審委員(1993年~迄今)。
  18. 經濟部工業局自動化審查委員(1993年~迄今)。
  19. 教育部學審會工科學術獎審查推薦委員(1992年~迄今)。
  20. 中國華中理工大學機械工程系兼任博士導師(1995年~迄今)。
  21. 中國哈爾濱工業大學精密機械工程系兼職教授(1995年~迄今)。
  22. 中國大連理工大學機械工程學系客座教授(2000年~迄今)。
  23. 中國合肥工業大學顧問教授(2000年~迄今)。
  24. 經濟部科技專案績效考評委員會機械自動化組委員(2001年~迄今)。
  25. 曾任國外著名學術期刊ASME, AIAA, Int. J. of Heat and Mass Transfer,Int.J.of Heat and Fluid, Int.J.of Experimental Thermal and Fluid Science, Int. J. of Fuzzy Sets and Systems等之審搞者。
  26. 曾任國家科學委員會工程研究發展處,機械熱流與能源學門召集人(1997年~2000年)。
  27. 曾任美國“Int. J. of Transport Phenomena”期刊之Regional Editor (1997/1~2000/1)。
  28. 曾任中國力學期刊常務編輯。
  29. 曾任中國機械工程學會常務理事(1998~2000)。
  30. 曾任中華民國灰色系統學會理事長(1996~2002)。
  31. 曾任中山學術著作獎評審委員(1997)。
  32. 曾任多次國際熱傳研討會議,自動控制研討會議及機械製造系統研討會議之論文宣讀分組主持人。
  33. 曾任國科會工程處諮議委員,評議委員(十年)。
  34. 曾任經濟部第五屆、第七屆及第九屆(2000年)國家產品形象金質獎選拔委員。
  35. 曾任教育部技術學院機械工程類科教學評鑑委員召集人(1983年~1997年)。
     

 

榮譽

一、獎項

  1. 1998年及2002年獲教育部國家講座主持人
  2. 2001年獲成功大學講座教授。
  3. 1999年獲中國機械工程學會獎章。(最高榮譽獎)
  4. 1999年獲東元科技獎。(機械類每年選拔一位)
  5. 1997年獲得中華民國力學學會孫方鐸力學獎章(中華民國力學學會最高榮譽學術獎)。
  6. 1997年獲得中山學術著作獎。(每年選拔二至三位)
  7. 1995年獲國科會特約研究員(1995年~迄今)。(必需最少獲得傑出研究獎三次以上,始可被選為特約研究員)
  8. 1993年獲國科會傑出研究獎(第九屆) (1993年~1995年)。
  9. 1991年獲國科會傑出研究獎(第七屆) (1991年~1993年)。
  10. 1989年獲國科會傑出研究獎(第五屆) (1989年~1991年)。
  11. 1988年獲教育部工科學術獎。
  12. 1987年獲國科會傑出研究獎(第三屆) (1987年~1989年)。
  13. 1985年獲國科會傑出研究獎(第一屆) (1985年~1987年)。
  14. 1994年獲中國工程師學會傑出工程教授獎。
  15. 教育部教學特優獎(1994年)。
  16. “汽泡成長之理論分析”, 中國機械工程學會,1971年年會論文獲獎第一名。
  17. 2001年獲Thomson Scientific【SCI】論文收錄機構頒發(1981~1999年間)被全世界引用率高之”發現卓越-台灣經典引文獎”。
  18. 2002年獲國科會傑出特約研究員獎。

 

二、榮譽

  1. CSME首屆會士(2008年) 。
  2. 22003年海峽兩岸製造技術研討會大會主席(台北) 。
  3. 32001與2004年兩屆海峽兩岸製造技術研討會,代表中華民國為大會榮譽主席(大連市,浙江杭州) 。
  4. 1997、1999 與2001年三屆國際精密量測科學與技術研討會代表中華民國為大會榮譽主席。

 

 

三、演講

  1. 陳朝光, “二十一世紀熱流科技之研究與展望”,中國機械工程學會第一屆熱流科技研討會,台灣新竹,清華大學,1992。
  2. 陳朝光, “灰色系統理論在預測上之應用”,中國機械工程學會第十屆學術研討會,台灣新竹,交通大學,1993。
  3. 陳朝光, “大學機械工程學系自動控制與機械製造課程規畫”,全國大學機械工程教育課程改進研討會。主辦:教育部,台灣高雄,中山大學,1993。
  4. 陳朝光, “熱流科技在機械製造工程上之應用”,中國機械工程學會主辦現代機械製造技術研討會,台灣中壢,中央大學,1994。
  5. 陳朝光, “精密機械工程教育之改進”,第一屆機械相關系所工程教育/產官學研討會。主辦:教育部,國科會與經濟部。台灣台北,1994。
  6. 陳朝光, “普通大學與技術學院機械系之定位問題”,第二屆機械相關系所工程教育/ 產官學研討會。主辦:中國機械工程師學會,教育部,台灣屏東墾丁,1996。
  7. 陳朝光, “機械工程學程之檢討與建議”, 全國大學機械工程教育課程改進研討會” 。主辦:中國機械工程師學會,教育部,台灣嘉義,1996。
  8. 陳朝光, “灰色系統理論之過去,現在與未來之發展”,The first national Symposium on Gray system Theory and its applications, Tainan, Taiwan, Nov 2,1996。
  9. 陳朝光, “磁電變液在機械工程上之應用與進展”,一九九八年第二屆海峽兩岸機械工。程研討會,台灣台北,1998年2月。
  10. 陳朝光, “電流變液技術在工程上之應用”第二十屆全國力學會議,台灣台北,Dec 14,1996。
  11. 陳朝光, “磁電變液在機械工程上之應用與進展”,一九九八年第二屆海峽兩岸機械工。程研討會,台灣台北,1998年2月。
  12. 陳朝光, “五十年台灣工程教育之進展”,海峽兩岸向21世紀科技教育創新研討會,中國武漢,華中科技大學, 2000年10月。
專利

 

  1. 陳朝光, 賴新一, 陳柏甫,“可產生高精度研拋軌跡之輔助床台結構”,中華民國(新型),專利號碼:170221,專利期間:2001-2010。陳朝光, 賴新一, 陳柏甫,“創成式研拋軌跡規劃設計系統”,中華民國(發明),專利號碼:123249,專利期間:2000-2018。
  2. 陳朝光, 邱政勳,“防止管群乾枯的冷煤集結器”,中華民國(發明),專利號碼:410186,專利期間:1998-2017。
  3. 陳朝光, 過增元, 孟繼安, “交叉橢圓及圓截面換熱增強管”,中華民國(發明),專利號碼:195352,專利期間:2004-2023。
  4. 張旭銘, 郭振坤, 陳朝光, “燃料電池之流道板結構”, 中華民國(新型),專利號碼:M312783,專利期間:2007-2016。
  5. 張旭銘, 陳朝光, “水冷式之散熱器”, 中華民國(新型),專利號碼:M317749,專利期間:2007-2017。
     

 

著作

一、Refereed paper(國際學術期刊部分)

  1. Hsin Sen Chu, Cha`o-Kuang Chen and Cheng-I Weng, “Applications of Fourier sereies technique to transient heat transfer problem”, Chemical Engineering Communications, vol. 16, no. 1-6, pp. 215-225, 1982. [SCI, EI]
  2. Yih Min Chang, Cha`o-Kuang Chen and John W. Cleaver, “Transient Response of Fine by Optimal Linearization and variational Embedding Method”, Transactions of the ASME, Journal of Heat Tansfer, vol. 104, pp. 813-815, 1982. [SCI]
  3. Yih-Min Chang, Ting San Wang and Cha`o-Kuang Chen, “Optimal linearization and variational embedding solutions for convective fin with variable thermal conductivity”, Letters in Heat and Mass Transfer, U.S.A., vol. 9, no.2, pp. 99-106, 1982. [SCI]
  4. Hsin-Sen Chu, Cha`o-Kuang Chen and Cheng I. Weng, “Transient Response of Circular Pins“, Journal of Heat Transfer-Transactions of the ASME, vol. 105, pp. 205-208, 1983. [SCI]
  5. Hsin-Sen Chu, Cheng I. Weng and Cha`o-Kuang Chen, “Transient response of a composite straight fin”, Journal of Heat Transfer-Transactions of the ASME, vol.105, no. 2, pp. 307-311, 1983. [SCI, EI]
  6. Yih-Min Chang, Cha`o-Kuang Chen and C.-I. Weng, “Application of variational embedding technique to non-linear heat-transfer problems”, AIAA Journal, vol. 21, no.3, pp. 471-473, 1983. [SCI, EI]
  7. Chih-Yang Wu, Cheng-I Weng and Cha'o Kuang Chen, “Analysis of free coating onto a rotating roll“, Advances in the Astronautical Sciences, vol. 50, no. 1, pp. 320-329, 1983. [EI]
  8. Hsin-Sen Chu, Cheng I. Weng and Cha`o-Kuang Chen, “Transient response of composite straight fin“, Advances in the Astronautical Sciences, vol. 50, no. 1, pp. 539-549, 1983. [EI]
  9. Cha`o-Kuang Chen, K. H. Chen and Chih-Yang Wu, “Inertia effects in the laminar radial flow of a power law fluid with an electromagnetic-field”, Wear, vol. 95, pp. 45-57, 1984. [SCI, EI]
  10. Ming-Jer Huang, Cha`o-Kuang Chen, “Numerical Analysisi for Forced Convection over a Flate Plate in Power Law Fluids”, International Communication, Heat and Mass Transfer, vol.11, pp. 361-368, 1984. [SCI, EI]
  11. Ming-Jer Huang and Cha`o-Kuang Chen, “Vertical Circular Pin with Conjugated Forced Convection-Conduction Flow”, Journal of Heat Transfer-Transactions of the ASME, vol.106, pp. 658-661, 1984. [SCI, EI]
  12. Ming-Jong Tsai, Cha`o-Kuang Chen, and F. C. Kung, “Analysis of linear time-varying systems by shifted legendre polynomials”, Journal of the Franklin Institute-Engineering and Applied Mathematics, vol.318, no.4, pp. 275-282, 1984. [SCI, EI]
  13. Cha`o-Kuang Chen, Y.-M. Chang, and J. W. Clearver, “Variational Embedding Technique to Inward Solidification Subject to Convection and Radiation”, Transactions of the ASME, Journal of Energy Resources Technology, vol. 107, no. 1, pp. 135-137, 1985. [SCI, EI]
  14. Ming-Jer Huang and Cha`o-Kuang Chen, “Conjugate mixed convection and conduction heat-transfer along a vertical circular pin”, International Journal of Heat Mass Transfer, vol.28, no.3, pp. 523-529, 1985. [SCI, EI]
  15. Chih-Yang Wu, Cheng-I Weng and Cha'o Kuang Chen, “Analysis of free coating onto a rotating roll“, Chemical Engineering Communications, vol. 33, no. 1-4, pp. 245-254, 1985. [SCI, EI]
  16. Fue-Sang Lien, Chih-Yang Wu, and Cha`o-Kuang Chen, “Effects of convection heat and mass transfer on the flow about an oscillating vertical plate under magnetic field”, International  Com. Heat Mass Transfer, vol.12, pp. 587-596, 1985. [SCI, EI]
  17. Fue-Sang Lien, Cha`o-Kuang Chen, and Y.-M. Chang, “Effects of free-convection and mass-transfer on the flow past an impulsively moving infinite vertical circular-cylinder”, International Com. Heat Mass Transfer, vol.12, pp. 127-137, 1985. [SCI, EI]
  18. Fue-Sang Lien and Cha`o-Kuang Chen “Radiative effect on the conjugated forced convection-conduction analysis of heat-transfer in a plate fin”, AIAA Journal, vol.23, no.10, pp. 1645-1647, 1985. [SCI, EI]
  19. Shun-Ching Lee, King-Leung Wong, Cha`o-Kuang Chen, “The Finite Element Solution of Laminar Combination Convection from a Horizontal Cylinder”, International Journal of Computer Methods in Applied Mechanics and Engineering, U. S. A., vol.50, no.2, p 147-166, 1985. [SCI, EI]
  20. Ming-Jer Huang, Cha`o-Kuang Chen, and J. W. Clearver, “Vertical circular pin with conjugated natural convection-conduction flow”, Journal of Heat Transfer-Transactions of the ASME, vol.107, no.1, pp. 242-245, 1985. [SCI, EI]
  21. Ming-Jer Huang and Cha`o-Kuang Chen “Effects of surface mass-transfer on free-convection flow over vertical cylinder embedded in a saturated porous-medium”, Journal of Energy Resources Technology-Transactions of the ASME, vol.107, no.3, pp. 394-396, 1985. [SCI, EI]
  22. Fue-Sang Lien, Cha`o-Kuang Chen, J. W. Cleaver, “Heat Transfer Due to Axial Turbulent Flow Along a circular Rod”, AIAA Journal, vol.24, no.1 pp.,186-188, 1986. [SCI, EI]
  23. Cha`o-Kuang Chen, King-Leung Wong, J. W. Cleaver, “Finite Element Solutions of Laminar Flow and Heat Transfer of Air in a Staggered and an in-Line tube bank”, Int, J. Heat and Fluid Flow, U.K. vol.7 no.4, pp. 291-300, 1986. [SCI, EI]
  24. Cha`o-Kuang Chen, King-Leung Wong, Shun-Ching Lee, “The Finite Element Solution of Laminar Combined Convection From Two Sphere in Tandem Arrangement”, Computer Method in Applied Mechanics and Engineering vol.59, pp. 73-84, 1986. [SCI, EI]
  25. Fue-Sang Lien, Cha`o-Kuang Chen, “Analysis of Forced Convection Micropolar Boundary Layer about a Permeable Sphere”, Int Journal of Engineering Science, vol. 24, no. 6, pp. 991-999, 1986. [SCI, EI]
  26. Fue-Sang Lien, Cha`o-Kuang Chen, J. W. Cleaver, “Mixed and Free Convection over a Rotating Sphere with Blowing and Suction”, Journal of Heat Transfer-Transactions of the ASME, vol.108, pp. 398-404, 1986. [SCI, EI]
  27. Fue-Sang Lien, Cha`o-Kuang Chen, J. W. Cleaver, “Analysis of Natural Convection Flow of Micropolar Fluid about a Sphere With Blowing and Suction”, Journal of Heat Transfer-Transactions of the ASME, vol.108, pp 967-970, 1986. [SCI, EI]
  28. Fue-Sang Lien, Cha'o-Kung Chen. J. W. Cleaver, “Forced Convection over Rotating Bodies with Blowing and Suction”, AIAA Journal, vol.24, no.5, pp. 854-856, 1986. [SCI, EI]
  29. Fue-Sang Lien, Cha`o-Kuang Chen, “Effects of Microstructure on the Conjugated Mixed Forced and Free Convection-Conduction Analysis of Heat Transfer in a Vertical Plate Fin”, Journal of Heat Transfer-Transactions of the ASME, vol.108, pp. 580-584, 1986. [SCI, EI]
  30. King-Leng Wong, Cha`o-Kuang Chen, “Finite-Element Solution of Laminar Combined Convection from Tow Horizontal Cylinders in Tandem Arrangement”, AICHE Journal, vol. 32, no.4, pp. 557-565, 1986. [SCI, EI]
  31. King-Leung Wong, Shun-Ching Lee, Cha`o-Kuang Chen, “Finite Element Solution of Laminar Combined Convection Form a Sphere”, Journal of Heat Transfer-Transactions of the ASME, vol.108, pp. 860-865, 1986. [SCI, EI
  32. Ming-Jer Huaug Wong, Kuo-Ann Yih, You-Li Chou, Cha`o-Kuang Chen, “Mixed convection Flow over s Horizontal Cylinder or a Sphere Embedded in a Saturated Porous Medium”, Journal of Heat Transfer-Transactions of the ASME, vol.108, pp. 469-471, 1986. [SCI, EI]
  33. Yu-Ching Yang, Cha`o-Kuang Chen, “Thermoelastic transient-response of an infinitely long annular cylinder composed of 2 different materials”, Int. Journal of Engineering Science, vol.24, no.4, pp. 569-581, 1986. [SCI, EI]
  34. Yu-Ching Yang, Ting San Wang and Cha`o-Kuang Chen, “Thermoelastic transient-response of an infinitely long annular cylinder”, Journal of Thermal Stresses,  vol. 9, p19-30, 1986. [SCI, EI]
  35. Heiu-Jou Shaw, Cha`o-Kuang Chen, and J. W. Clearver, “Cubic spline numerical-solution for two-dimensional natural-convection in a partially divided enclosure”, Numerical Heat Transfer, vol. 12, no.4, pp. 439-455, 1987. [SCI, EI]
  36. Cha`o-Kuang Chen, Chen-I Hung and W. C. Horng, “Transient natural convection on a vertical Flat plate Embedded in a High-porosity medium”, Transactions of the ASME, Journal of Energy Resources Technology, vol. 109, pp. 112-118, 1987. [SCI, EI]
  37. H.-T. Chen and Cha`o-Kuang Chen, “Natural-convection of non-newtonian fluids about a horizontal surface in a porous-medium”, Transactions of the ASME, Journal of Energy Resources Technology, vol. 109, pp. 119-123, 1987. [SCI, EI]
  38. Ming-Jer Huang and Cha`o-Kuang Chen, “Conjugate forced convection-conduction plate fin in power law fluids”, International Communication, Heat and Mass Transfer, vol.14, pp. 371-380, 1987. [SCI, EI]
  39. Ming-Jer Huang and Cha`o-Kuang Chen, “Laminar free-convection from a sphere with blowing and suction”, Journal of Heat Transfer-Transactions of the ASME, vol.109, no. 2, pp. 529-532, 1987. [SCI, EI]
  40. King-Leung Wong and Cha`o-Kuang Chen, “Finite-element solution for laminar-flow and heat-transfer past a short circular-cylinder”, International Communications in Heat and Mass Transfer, vol.14, no. 1, pp. 57-66, 1987. [SCI, EI]
  41. Cha`o-Kuang Chen, Shin-Gia Kuo and Ching-Yu Yang, “Solution of Variation porblems using the Fourier series operational matrix”, Int J. system, vol.18, no.5, pp. 799-817, 1987. [SCI, EI]
  42. Ching-Yu Yang and Cha`o-Kuang Chen, “Analysis and parameter identification of time-delay systems via Taylor series”, Int. J. system science, vol.18, no.7, pp. 1347-1353, 1987. [SCI, EI]
  43. Fue-Sang Lien and Cha`o-Kuang Chen “Mixed Convection of Micropolar Boundary Layer about permeable Sphere” Int. J. Engineering Science, vol. 25, pp. 775-786, 1987. [SCI, EI]
  44. Han-Taw Chen and Cha`o-Kuang Chen, “Hybrid Caplace Transfer/ Finite Element Method For one Dimensional Transient Heat Conduction Problem”, Int. Computer Method in Applied Mechanics and Engineering, vol.63, pp. 83-95, 1987. [SCI, EI]
  45. Shin-Gia Kuo, Ching-Yu Yang and Cha`o-Kuang Chen, “Fourier Exponential series matrix of integration”, Int. J. System Science, vol. 18, no. 12, pp. 2395-2400, 1987. [SCI, EI]
  46. Cha`o-Kuang Chen and Ching-Yu Yang, “Analysis and Parameter identification of time-delay systems via polynomial series”, International Journal of controll, vol. 46, no.1, pp. 111-127, 1987. [SCI, EI]
  47. Cha`o-Kuang Chen, Ching-Yu Yang and Cha`o-Kuang Chen, “Analysis and parameter indentification of scaled system via polynomial series”, Int. J. system science, vol.18, no.12, pp. 2383-2394, 1987. [SCI, EI]
  48. Cha`o-Kuang Chen and Ching-Yu Yang, “Linear optimal-control systems using reduced-order observers via polynomial series”, Int. J. System Science, vol. 18, no. 7, pp. 1355-1362, 1987. [SCI, EI]
  49. Han-Taw Chen and Cha`o-Kuang Chen, “Application of hybrid laplace transform finite-difference method to transient heat-conduction problems”, Numerical Heat Transfer , vol. 14, no. 3, pp. 343-356, 1988. [SCI, EI]
  50. Han-Taw Chen, Cha`o-Kuang Chen,“Natural Convection of Non-Newtonian Fluids in the Porous Medium on a Horizontal Surface”, Chem. Eng. Comm., vol.69, pp. 29-41, 1988. [SCI, EI]
  51. Cha`o-Kuang Chen, Ming-I Char, “Heat Transfer of a Continuous Stretching Surface with Suction of Blowing”, Journal of Mathematical Analysis and Application, vol. 135, pp. 568-580, 1988. [SCI, EI]
  52. Cha`o-Kuang Chen and King-Leung Wong,“Finite Element Solutions for Laminar Flow and Combined Convection Around a Square Prism”, Warme Und Stoffubertragung-Thermo and Fluid Dynamics,  vol. 22, pp. 61-67, 1988. [SCI, EI]
  53. Heiu-Jou Shaw and Cha`o-Kuang Chen, “Natural Convection in a Partitioned Enclosure Heated from below”, Warme-und Stoffubetrangung Thermo-and Fluid Dynamics, W. G. vol. 22, pp. 303-308, 1988. [SCI, EI]
  54. King-Leung Wong and Cha`o-Kuang Chen,“The Finite Element Solutions of Laminar Flow and Combined Convection of Air in a Staggered or an In-Line Tube-Bank”, Wrame und Stoffubertragung, vol. 23, pp. 93-101, 1988. [SCI, EI]
  55. Heiu-Jou Shaw, Cha`o-Kuang Chen, “The Effects of Thermal Sources on Natural Convection in an Enclosure”, Int. Journal of Heat and Flow, vol. 9, no. 3,p 296-301, 1988. [SCI, EI]
  56. Han-Taw Chen and Cha`o-Kuang Chen, “Natural convection of a non-Newtonian fluid about a horizontal cylinder and a sphere in a porous medium”, International Communications in Heat and Mass Transfer, vol.15, no.5, pp. 605-614, 1988. [SCI, EI]
  57. Han-Taw Chen, Cha`o-Kuang Chen,“Hydird Laplaceed Transform/Finite Difference Methods for Transient Heat Conduction Problem”, Int. Journal for Numerical Methods in Engineering, vol. 26, no. 6, pp. 1433-1447, 1988. [SCI, EI]
  58. T-W Huang, Cheng-I Weng and Cha`o-Kuang Chen, “Analysis of Finite Width Journal Bearing with Micropolor Fluids”, Wear, vol. 123, pp. 1-12, 1988. [SCI, EI]
  59. Ching-Yu Yang, C. L. Chen, and Cha`o-Kuang Chen, “Solutions of integral equations via Taylor's series”, Int. J. System Science, vol.19, no.2, pp. 265-273, 1988. [SCI, EI]
  60. Ching-Yu Yang and Cha`o-Kuang Chen, “Analysis of bilinear-systems via polynomial series”, Int. J. System Science, vol.19, no.2, pp. 275-288, 1988. [SCI, EI]
  61. Ching-Yu Yang and Cha`o-Kuang Chen, “Analysis of Optimal Control of time-varying systems via Polynomial series”, Int. J. System Science, vol.19, no.2, pp. 289-310, 1988. [SCI, EI]
  62. Han-Taw Chen, Cha`o-Kuang Chen, “Free Convection Flow over a Vertical Flat Plate Embedded in a Non-Newtonian Porous Medium”, Journal of Heat Transfer-Transactions of the ASME, vol.110, no. 1, pp. 257-260, 1988. [SCI, EI]
  63. Ching-Yu Yang and Cha`o-Kuang Chen, “Linear optimal control system by reduced-order observers via orthogonal functions”, Int. J. system science, vol. 19, no. 1, pp. 23-32, 1988. [SCI, EI]
  64. Ching-Yu Yang and Cha`o-Kuang Chen, “Solution of variational problems via Taylor's seriers”, Int. J. system science, vol.19, no.1, pp. 33-39, 1988. [SCI, EI]
  65. Ming-I Char and Cha`o-Kuang Chen, “Temperature-field in non-newtonian flow over a stretching plate with variable heat-flux”, Int. J. of Heat and Mass Transfer, vol. 31, no. 5, pp. 917-921, 1988. [SCI, EI]
  66. Pi-Ying Cheng, Cheng-I Wemg And Cha`o-Kuang Chen, “Symbolic Derivation of Dynamic Equations of Motion for Robotics manipulators Using Piogram Symbolic Method”, IEEE Journal of Robotics and Automation, vol. 4, no. 6, pp. 599-609, Dec. 1988. [SCI, EI]
  67. S-B Wen, Cha`o-Kuang Chen and H. S. Liu, “Size Reduction of Magnetice Sand to Nanometer Powder in a Laboratory Vibration Mill ”, Powder Technology, vol. 55, pp. 11-17, 1988. [SCI, EI]
  68. Cha`o-Kuang Chen and Jiunn-Ming Chen, “Transient Heat Conduction in an Infinitely Long Hollow Cylinder Composed of Three Different Materials”, Computers & Structures, vol. 33, no. 3, pp. 765-769, 1989. [SCI, EI]
  69. Cha`o-Kuang Chen, King-Leung Wong and Ming-Shaw Lee, “Finite Element Solution of Time-Dependent Flow and Heat-Transfer Characteristics Around a Circular Cylinder”, computers & Structures, vol. 33, no. 3, pp 771-779, 1989. [SCI, EI]
  70. Pi-Ying Cheng, Cha`o-Kuang Chen and Chen-I Weng, “Application of Symbolic Repersentation Method to the Inverse Kinematics Problem of Robot Manipulators”, Mechanism and Machine Theory, vol. 24, no. 1, pp. 61-72, 1989. [SCI, EI]
  71. Chen-I Hung, Cha`o-Kuang Chen, and Ping Cheng, “Transient conjugate natural convection heat transfer along a vertical plate fin in a high-porosity medium”, Numerical Heat Transfer, vol. 15, pp. 133-148, 1989. [SCI, EI]
  72. Chien-Hsin Chen and Cha`o-Kuang Chen, “The Influence of Fluid Inertia on the Operating Characteristics of Finite Journal Bearings”, Wear 131, pp. 229-240, 1989. [SCI, EI]
  73. Ming-Jer Huang, Jhy-Shean Huang, You-Li Chou, and Cha`o-Kuang Chen, “Effects of Prandtl Number on Free Convection Heat Transfer from a Vertical Plate to a Non-Newtonian Fluid”, Journal of Heat Transfer-Transactions of the ASME, vol.111, pp. 189-191, 1989. [SCI, EI]
  74. Cha`o-Kuang Chen, Chen-Ping Chiu, and Shun-Ching Lee, “Turbulent Mixed Flow of Free and Forced Convection Between Vertical Parallel Plates” , J. Thermophysics, vol. 3, no. 4, pp. 454-460, October, 1989. [EI]
  75. Cha`o-Kuang Chen and Chien-Hsin Chen, “Nonuniform Porosity and Non-Darcian Effects on Conjugate Mixed Convection Heat Transfer from a Plate Fin in Porous Media”, Int. J. Heat and Fluid Flow, vol. 11, no. 1, pp. 65-71, March, 1990. [SCI, EI]
  76. Shung-Ching Lee and Cha`o-Kuang Chen, “Finite Element Solution for Turbulent Forced Convection Between Parallel Plates, ”Computer & Structures, vol. 34, no. 3, pp. 387-393, 1990. [SCI, EI]
  77. Wen-Jyi Wu and Cha`o-Kuang Chen, “Transient Response of a Spiral Fin with its Base Subjected to a Sinusoidal From in Temperature”, Computers & Structures, vol. 34, no. 1, pp. 161-169, 1990. [SCI, EI]
  78. Chien-Hsin Chen and Cha`o-Kuang Chen, “Non-Darcian Mixed Convection along a Vertical Plate Embedded in a Porous Medium”, Appl. Math. Modeling , vol. 14, pp. 482-488, September, 1990. [SCI, EI]
  79. Ming-I Char, Cha`o-Kuang Chen and J. W. Cleaver ,“ Conjugate Forced Convection Heat Transfer from a Continuius,Moving Flat Sheet ”, Int.J.Heat and Fluid Flow, vol. 11, no. 3, pp. 257-261, 1990. [SCI, EI]
  80. Cha`o-Kuang Chen, Ming-I Char and J. W. Cleaver, “Temperature Field in Non-Newtonian Flow over a Stretching Plate”, Journal of Mathematical Analysis and Applications, vol. 151, no. 2, pp. 301-307, September 15, 1990. [SCI, EI]
  81. Wen-Jyi Wu and Cha`o-Kuang Chen, “Analysis of the Transient Response of a Composite Circular Pin”, Journal of Mathematical Analysis and Application, vol. 150, no. 2, pp. 494-507, August, 1990. [SCI, EI]
  82. Cha`o-Kuang Chen, Shih-Wen Hsiao and P.Cheng, “Teansient Natural Convection in an Eccentric Porous Annulus between Horizontal Cyliders”, Numerical Heat Transfer, Part A, vol. 17, pp. 431-448, 1990. [SCI, EI]
  83. Fue-Sang Lien, Tzer-Ming Chen and Cha`o-Kuang Chen, “Analysis of a Free Convection Micropolor Boundary Layer about a Horizontal Permeable Cylinder at a Nonuniform Thermal Condition”, Journal of Heat Transfer-Transactions of the ASME, vol. 112, pp. 504-506, May, 1990. [SCI, EI]
  84. Mming-Jer Huang and Cha`o-Kuang Chen, “Local Similarity Solutions of Free Convective Heat Transfer from a Vertical Plate to Non-Newtonian Power Law Fluids”, Int.J.Heat Mass Transfer, vol. 33, pp. 119-125, 1990. [SCI, EI]
  85. H.-T. Chen and Cha`o-Kuang Chen,  “SIMPLE method for transient-response of gas-to-gas cross-flow heat-exchangers with neither gas mixed”, International Journal of Heat and Mass Transfer, vol. 34, 11, pp. 2891-2898, 1991. [SCI, EI]
  86. Cha`o-Kuang Chen and Tsan-Hui Hsu, “Heat-transfer of a thermomicropolar fluid past a porous stretching sheet”, Computers & Mathematics with Applications, vol. 21, no. 8, pp. 37-45, 1991. [SCI, EI]
  87. Cha`o-Kuang Chen and Chien-Hsin Chen, “Non-Darcian Effects on Conjgate Mixed Convection about a Vertical Circular Pin in a Porousmedium ”, Computers & Structures,vol. 38, no. 5/6, pp. 529-535, 1991. [SCI, EI]
  88. Cha`o-Kuang Chen and Tzer-Ming Chen, “New Hybrid Laplace Transform / Finite Element Method for Two-Dimension Transient Heat Conduction Problem”, Numerical Heat Transfer, Part B, vol. 20, pp. 191-205, 1991. [SCI, EI]
  89. Cha`o-Kuang Chen and Tzer-Ming Chen, “New Hybris Laplace Transform/Finite Element Method for Three-Dimension Transient Heat Conduction Problem”, International Journal for Numerical Methods in Engineering, vol. 32, pp. 45-61, 1991. [SCI, EI]
  90. Shin-Gia Kua and Cha`o-Kuang Chen, “A Mircocomputer-Controlled Die Chang System”, Computers in Industry 16, pp. 39-45, 1991. [SCI, EI]
  91. T-M Chen and Cha`o-Kuang Chen, “Analysis of the Conjgate Transient Natural Convection-Conduction Heat Transfer of a Fin Array in a Cavity”, Int. J. Heat and Fluid Flow, vol. 12, no. 1, pp. 29-35, 1991. [SCI, EI]
  92. Tsan-Hui Tsu and Cha`o-Kuang Chen, “Transient Analysis of Combined Forced and Free Convection-Conduction along a Vertical Circular Fin in Micropolor Fluids”, Numerical Heat Transfer, Part A, vol. 19, pp. 177-185, 1991. [SCI, EI]
  93. Cha`o-Kuang Chen and Tsan-Hui Hsu, “Comjgate Mixed Convection-Conduction of Micropolar Fluids on a Moving Vertical Cylinder”, Journal of Thermophysics and Heat Transfer, vol. 5, no. 2, April-June, 1991. [EI]
  94. Heiu-Jou Shaw, Wen-Lih Chen and Cha`o-Kuang Chen, “Study on the Channel with a Thermal Source”, Transactions of the ASME, Journal of Electronic Packaging, vol.113, pp. 40-49, March, 1991. [EI]
  95. H.-T. Chen and Cha`o-Kuang Chen,  “Transient-response of cross-flow heat-exchangers with finite wall capacitance”, Journal of Heat Transfer-Transactions of the ASME, vol. 114, 3, pp. 752-755, 1992. [SCI, EI]
  96. Shin-Wen Hsiao, P. Chen and Cha`o-Kuang Chen, “Non-Uniform Porosity and Thermal Dispersion Effects on Natural Convection about a Heated Horizontal Cylinder in an Enclosed Porous Medium”, Int. J. Heat Mass Transfer, vol. 35, no. 12, pp. 3407-3481, 1992. [SCI, EI]
  97. Cha`o-Kuang Chen, Chien-Hsin Chen, W. J. Minkowycz and U. S. Gill, “Non-Darcian Effects on Mixed Convection about a Vertical Cylinder Embedded in a Saturated Porous Medium”, Int. J. Heat Mass Transfer, vol. 35, Ni. 11, pp. 3041-3046, 1992. [SCI, EI]
  98. Jiunn-Ming Chen, Cha`o-Kuang Chen and Ming-I. Char, “Thermoelastic Transient Response of an Infinitely Long Annular Cylinder Composed of Three Different Materials”, Computers & Stuctures, vol. 45, no. 2, pp. 229-236, 1992. [SCI, EI]
  99. M.-C. Shih and Cha`o-Kuang Chen, “An experimental-study on the hydraulic oscillator position control by using the model-following optimal-control method”, Mechatronics, vol. 2, no. 4, pp. 375-389, 1992. [SCI, EI]
  100. Shen-An Yang and Cha`o-Kuang Chen, “Laminar Film Condensation on a Finite-Size Horizontal Plate with Suction at the Wall”, Appl.Math.Modelling, vol. 16 p 325-329, June, 1992. [SCI, EI]
  101. Cha`o-Kuang Chen, Chien-Hsin Chen, U. S. Gill and W. J. Minkowycz, “Boundary and Inertia Effects on Conjgate Mixed Convection-Conduction Heat Transfer from a Vertical Cylinderical Fin Embedded in a Porous Medium”, Numerical Heat Transfer, Part A, vol. 21, pp. 423-441, 1992. [SCI, EI]
  102. Sheng-An Yang and Cha`o-Kuang Chen, “Magnetohydrodynamic Effects upon Momentum Transfer on a Continuously Moving Flat Plane”, Computers Math. Applic, vol. 23, no. 10, pp. 27-33, 1992. [SCI, EI]
  103. Chieh-Li Chen, S-K Yang and Cha`o-Kuang Chen, “On Determining the Root Locations of an Ibterval System”, Control-Theory and Advanced Techonology, vol. 8, no. 4,p 789-802, December, 1992. [SCI, EI]
  104. Yue-Tzu Yang, Cha`o-Kuang Chen and Sang-Ru Wu, “Transient Laminar forced Convection from a Circular Cylinder Using a Body-Fitted Coordinate System”, AIAA J. Thermophysics, vol. 6, no. 1, pp. 184-188, 1992. [EI]
  105. Chieh-Li Chen, Pey-Chung Chen and Cha`o-Kuang Chen, “Application of Fuzzy Adaptive Controller in Nonlinear Process Control”, Chem. Eng. Comm., vol. 123, pp. 111-126, 1993. [SCI, EI]
  106. Cha`o-Kuang Chen and Bor-Lih Kuo, “Transient Thermal Contact Problem for Axial Crack in a hollow Circular Cylinder”, Eng. Fracture Mechanics, vol.46, no.6, pp. 931-943, 1993. [SCI, EI]
  107. Chen-Ren Lin and Cha`o-Kuang Chen, “Free Convection Flow from A Vertical Isothermal Cone with Temperature – Dependent Viscosity”, J. of Polym-plast. Technol, Eng. 32(4), pp. 277-287,1993. [SCI, EI]
  108. Sheng-An Yang and Cha`o-Kuang Chen, “Role of Surface Tension and Ellipticity Inlaminar Film Condensation on a Horizontal Elliptical Tube”, Int. J. Heat Mass Transfer, vol. 36, no.12, pp. 3135-3141, 1993. [SCI, EI]
  109. S.-A. Yang and Cha`o-Kuang Chen, “Transient film condensation on a horizontal elliptic tube”, Journal of Physics D-Applied Physics, vol. 26, no.5, pp. 793-797, 1993. [SCI, EI]
  110. Cheng-An Yang and Cha`o-Kuang Chen, “Effects of Surface Tension and Non- isothermal Wall Temperature Variation Upon Filmwise Condensation on Vertical Ellipsoids/Sphere”, Proc. Royal. Soc Lond. A, 442, 301-312,1993. [SCI, EI]
  111. C. L. Chen, P. C. Chen and Cha`o-Kuang Chen, “ A Pneumatic Model-following Control System Using a Fuzzy Adaptive Control ” , Automatica, vol. 29, no.4, pp. 1101-1105 , 1993 . [SCI, EI]
  112. Cheng-Ren Lin and Cha`o-Kuang Chen, “Exact Solutions of Heat Transfer of a Fluid Underlying the Axisymmetric Spreading on the Surface”, J. of Mathematical Analysis and Applications 176, 301-309, 1993. [SCI, EI]
  113. Cheng- Ren Lin and Cha`o-Kuang Chen, “Hydromagnetic Flowe and Heat Transfer about a Fluid Underlying the Axisymmetric Spreading Surface”, Int. J. Engng. Sci., vol.31, no.2, pp. 257-261, 1993. [SCI, EI]
  114. Chieh-Li Chen, Pey-Chung Chen and Cha`o-Kuang Chen, “Analysis and Design of Fuzzy Control System”, Fuzzy Sets and System, 57, 125-140, 1993. [SCI, EI]
  115. Sheng-An Yang and Cha`o-Kuang Chen, “Filmwise Condensation on Non-isothermal Horizontal Elliptical Tubes with Surface Tension”, Journal of Thermophysics and Heat Transfer, vol. 7,no.4, pp. 729-732, 1993. [SCI, EI]
  116. Jenq-ShingChiou, Sheng-An Yang and Cha`o-Kuang Chen, “Filmwise Condensation on a Horizontal Elliptical Tube Embedded in Porous Media”, Chem. Eng. Comm., vol. 127, pp. 125-135, 1994. [SCI, EI]
  117. Jenq-ShingChiou, M. S. Chiang and Cha`o-Kuang Chen, “Numberical Simulation Method Applied to the Multi-Expansion Exhaust System of a Two-Stoke Engine”, Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, vol.208, no. 4, pp. 281-288,1994. [SCI, EI]
  118. C.-Y. Yang and Cha`o-Kuang Chen, “Analysis and optimal-control of time-varying systems via fourier-series”, International Journal of Systems Science, vol.25, no. 11, pp.1663-1678, 1994 [SCI, EI]
  119. Cha`o-Kuang Chen and Sheng-An Yang, “Laminar Film Condensation on a Horizontal Elliptical Tube with Variable Wall Temperature”, Journal of Heat Transfer-Transactions of the ASME, vol. 116, pp. 1046-1049, 1994. [SCI, EI]
  120. Ching-Yang Cheng and Cha`o-Kuang Chen, “Transient Response of Annular Fins of Various Shapes Subjected to Constant Base Heat Fluxes”, J. Phys. D: Appl. Phys., vol. 27,p 2302-2306, 1994. [SCI, EI]
  121. Cha`o-Kuang Chen and B. L. Kuo, “ Transient Thermal Contact Problem for an Internal Edge Crack in a Layered Cylinder ”, Engineering Fracture Mechanics, vol.49, no.3, pp. 381-392, 1994. [SCI, EI]
  122. Shih-Wen Hsiao and Cha`o-Kuang Chen, “A Numerical Solution for Nature Convection in An Inclined Porous Cavity with a Discrete Heat Source on one wall”, Int. J. Heat Mass Transfer, vol. 37,NO. 15, pp. 2193-2201, 1994. [SCI, EI]
  123. Cha`o-Kuang Chen and Bor-Lih Kuo, “Coupled transient thermoelastic contact problem in an edge-cracked plate”, ASME J. of Applied Mechanics, vol.61, no.3,  pp. 736-738, 1994. [SCI, EI]
  124. Jenq-ShingChiou, Sheng-An Yang and Cha`o-Kuang Chen, “Laminar FIlm Condensation inside a Horizontal Elliptal Tube”, Applied Mathematical Modelling, vol. 18, no. 6, pp. 340-346, 1994. [SCI, EI]
  125. Cha`o-Kuang Chen and B. L. Kuo, “Coupled Transient Thermoelastic Contact Problems for Axial Cracks in Hollow Cylinders”, Int. J. for Numerical Methods in Engineering, vol. 37, pp. 2109-2123,1994. [SCI, EI]
  126. Shih-Wen Hsiao and Cha`o-Kuang Chen, “Natural Cnvection Heat Transfer from a Corrugated Plate Embedded in an Enclosed Porous Medium”, Numerical Heat Transfer, Part A, pp. 331-345, 1994. [SCI, EI]
  127. Cha`o-Kuang Chen and Sheng-An Yang, “Laminar Film Condensation inside a Horizontal Elliptical Tube with Variable Wall Temperature”, Int. J. Heat and Fluid Flow, vol. 15,no.1,p 75-78, 1994. [SCI, EI]
  128. C. R. Lin and Cha`o-Kuang Chen, “Effect of Temperature Dependent Viscosity on the Flow and Heat Transfer over an Accelerating Surface”, J. Phys. D: Appl.Phys, pp. 29-36, 1994. [SCI, EI]
  129. Cha`o-Kuang Chen, Yue-Tzu Yang and S. R. Wu, “Laminar Mixed Convection from a Circular Cylinder Using a Body-Fitted Coordinate System”, AIAA Journal of Thermophysics and Heat Transfer, vol. 8,no. 3, pp. 695-701, 1994. [SCI, EI]
  130. Horong-Tsann Huang, Cheng-I Weng and Cha`o-Kuang Chen, “Analysis of Clearance and Rake Angles along Cutting Edge for Multifacet Drills (MFD)”, Transactions of the ASME, Journal of Engineering for Industry, vol.116, no. 1, pp. 8-16, 1994. [SCI, EI]
  131. Horong-Tsann Huang, Cheng-I Weng and Cha`o-Kuang Chen, “Prediction of Thrust and Torque for Multifacet Drills (MFD)”, Transactions of the ASME, Journal of Engineering for Industry, vol.116, no. 1, pp. 1-7, February, 1994. [SCI, EI]
  132. Cha`o-Kuang Chen and Ching-Yang Cheng, “Performance Optimizations of a Irreversible Heat Pump”, J. of Physics D. Applied Physics, vol. 28, pp. 2451-2454, 1995. [SCI, EI]
  133. Jenq-ShingChiou, C. J. Liu, and Cha`o-Kuang Chen, “The performance of an irreversible Carnot refrigeration cycle”, J. of phys. D: Appl. Phys., vol. 28, pp. 1314-1318, 1995. [SCI, EI]
  134. Chin-Min  Hsium and Cha`o-Kuang Chen, “Numerical investigation of the thickness and camber effects on aerodynamic characteristics for 2-dimensional airfoils with ground effect in viscous-flow”, Transactions of the Japan Society for Aeronautical and Space Sciences, vol. 38, pp. 77-90, 1995. [SCI, EI]
  135. Tsan-Hui Hsu and Cha`o-Kuang Chen, “Thermal Convection of Micropolar Fluids in a LID-Driven Cavity”, Int. comm in Heat and Mass Trans. vol. 22,no. 2,p 189-200, Apr, 1995. [SCI, EI]
  136. Cha`o-Kuang Chen and C. R. Lin, “Natural Convection from an Isothermal Vertical Surface Embedded in a Thermally Stratified High-Porosity Medium”, Int. J. Engng.Sci, vol. 33, no.1,p 131-138,1995. [SCI, EI]
  137. Cha`o-Kuang Chen and T. L. Tien “A New Forecasting Method For Time Continuous Model of Dynamic System“, Applied Mathematics and Computation, vol. 80, pp. 225-244, 1996. [SCI, EI]
  138. Jung-Shun Tsai, C. I Huang and Cha`o-Kuang Chen, “Nonlinear Hydromagnetic Stability Analysis of Condensation Film Flow Down a Vertical Plate”, Acta Mechanica, vol. 118, pp. 197-212, 1996. [SCI, EI]
  139. Cha`o-Kuang Chen, Yue-Tzu Yang and M.-T. Lin, “Transient free convection of non-Newtonian fluids along a wavy vertical plate including the magnetic field effect”, International Journal of Heat and Fluid Flow, vol. 17, pp. 604-612, 1996. [SCI, EI]
  140. Cha`o-Kuang Chen and T.L.Tien, “A New transfer function model: the grey dynamic model GDM(2,2,1)”, Int. J. of system Science, vol. 27, no.12, pp. 1371-1379, 1996. [SCI, EI]
  141. Chin-Min Hsiun and Cha`o-Kuang Chen, “Improved procedure for the inverse design of two-dimensional airfoils in ground effect”, Journal of Aircraft , vol. 33, no. 6, pp. 1094-1100,1996. [SCI, EI]
  142. Cha`o-Kuang Chen and S. H. Ho, “ Application of Differential Transform to Eigenvalue problem” J. of Applied Mathmatics and Computation, vol. 79, pp. 173-188, 1996. [SCI, EI]
  143. C. L. Chen, S.-H. Lin and Cha`o-Kuang Chen, “Application of Taylor transformation to nonlinear predictive control problem”, Appl. Math. Modelling, vol. 20, pp. 699-710, 1996. [SCI, EI]
  144. Chen-I Hung, Jung-Shun Tsai and Cha`o-Kuang Chen. “ Nonlinear Stability of the Thin Micropolar Liquid Film Flowing Down on a Vertical Plate”, J. of Fluids Engineering, vol.118, pp. 498-505, 1996. [SCI, EI]
  145. Jenq-ShingChiou, T. B. Chang and Cha`o-Kuang Chen “Laminar Film Condensation on a Finite – size Horizontal Surface with Surface Tension Efffect”, Trans. of Heat Transfer, vol 118, No 3 , pp 797-799,1996. [SCI, EI]
  146. Yue-Tzu Yang, Cha`o-Kuang Chen and Chi-Fang Chiou, “Convective heat transfer from a circular cylinder under the effect of a solid plane wall ”, International Journal for Numerical Methods in Fluids, vol.23, 2, pp. 163-176,1996. [SCI, EI]
  147. Shun-Ching Lee and Cha`o-Kuang Chen, “Finite Element Solutions of Laminar and Turbulent Mixed Convection in a Driven Cavity “, Int. J. for Numerical Method in Fluid, vol.23, pp. 47-64,1996. [SCI, EI]
  148. C. H. Chen, T. S. Chen and Cha`o-Kuang Chen, “ Non-Darcy mixed convection along nonisothermal vertical surfaces in porous media”, Int. J. Heat Mass Transfer vol.39, no.6 ,p 1157-1164,1996. [SCI, EI]
  149. Tsan-Hui Hsu and Cha`o-Kuang Chen,“Natural convection of micropolar fluids in a rectangular enclosure”, Int. J. Engng Sci. vol. 34, no.4, pp. 407-415, 1996. [SCI, EI]
  150. Chin-Min Hsiun and Cha`o-Kuang Chen, “ Aerodynamic Characteristics of a Two-Dimensional Airfoil with Ground Effect”, Journal of Aircraft , vol. 33, no.2, pp. 386-391,1996. [SCI, EI]
  151. Ching-Yu Yang and Cha`o-Kuang Chen, “Boundary estimation in two-dimensional inverse heat conduction problems”, J. of phys D: Appl. phys. 29, pp. 333-339, 1996. [SCI, EI]
  152. Ching-Yang Cheng and Cha`o-Kuang Chen, “ Power Optimization of an Endoreversible Regenerative Brayton Cycle”, Energy, the Int. J. vol.21, no. 4, pp. 241-247, 1996. [SCI, EI]
  153. Yue-Tzu Yang, Cha`o-Kuang Chen and Mong-Tung Lin, “Natural convection of non-Newtonian fluids along a wavy vertical plate including the magnetic field effect”, International Journal of Heat and Mass Transfer, vol. 39, 13, pp. 2831-2842, Sep. 1996. [SCI, EI]
  154. Chen-I Hung, Cha`o-Kuang Chen, and Jung-Shun Tsai, “ Weakly Nonlinear Stability Analysis of Condensate Film Flow Down a Vertical Cylinder”, International Journal of Heat and Mass Transfer, vol.39, no.13, pp. 2821-2829,1996. [SCI, EI]
  155. Chen-I Hung, Jung-Shun Tsai, and Cha`o-Kuang Chen, “ Nonlinear Stability of Magnetohydrodynamic Condensate Film Down a Vertical Plate with Constant Heat Flux ” International Journal of Heat and Mass Transfer, vol. 39, no.4, pp. 877-884,1996. [SCI, EI]
  156. Cha`o-Kuang Chen and T. L. Tien “A New Method of System Parameter Identification for Gray Model G.M.(1,1)”, The Journal of Gray System , vol. 8, No 4, pp. 321-330,1996. [EI]
  157. Pao-Tung Hsu, Yue-Tzu Yang and Cha`o-Kuang Chen, “Laminar film condensation on a finite-size horizontal wavy plate”, Int. Comm. Heat and Mass Transfer, vol.24, no.8, pp. 1141-1152, 1997. [SCI, EI]
  158. Cha`o-Kuang Chen and T.L.Tien, “The Indirect measurement of fatigue limits of structural steel by the deterministic grey dynamic model DGDM(1,1,1)”, Appl. Math. Modelling, vol. 21, pp. 611-619,1997. [SCI, EI]
  159. Cha`o-Kuang Chen and Tzong-Mou Wu, “Closed form synthesis of planar and spatial linkages function generation with symbolic representation”, Mathematic and Computers in Simulation, vol. 44, pp. 155-162, 1997. [SCI, EI]
  160. Cha`o-Kuang Chen and Tzu-Li Tien “A new forecasting method of discrete dynamic system”, Applied Mathematics and Computation, vol. 86, no. 1, pp. 61-84, 1997. [SCI, EI]
  161. Cha`o-Kuang Chen, Chen-I Hung and Jung-Shun Tsai, “Effect of a magnetic field on the Stability of the flow of Molten Material in Laser Cutting Process”, J. of Applied Physics, vol .82, No .6, pp. 2780- 2790,1997. [SCI, EI]
  162. Ching-Yu Yang and Cha`o-Kuang Chen, “Inverse estimation of the boundary condition in three-dimensional heat conduction”, J. of phys. D: Appl. Phys. vol. 30, pp. 2209-2216 , 1997. [SCI, EI]
  163. Cha`o-Kuang Chen and T-L Tien, “The Indirect Measurement of Tensile strength by the Deterministic Grey Dynamic Model DGDM (1,1,1)”, Int. J. of System science, vol. 28 no.7 p 683-690, 1997. [SCI, EI]
  164. Cha`o-Kuang Chen, and Ching-Yang Cheng, “Power optimization of an irreversible Brayton heat engine”, Energy Sources, vol. 19, no. 5, pp. 461-474, Jun 1997. [SCI, EI]
  165. Ching-Yang Cheng and Cha`o-Kuang Chen, “Ecological optimization of an irreversible Carnot heat engine”,Journal of Physics D: Applied Physics, vol. 30, no. 11, Jun 7, pp. 1602-1609, 1997. [SCI, EI]
  166. Yue-Tzu Yang, Pao-Tung Hsu and Cha`o-Kuang Chen, “ 3D-IHCP on a Hollow Cylinder”, J. of physics D: Applied physics, vol. 30, no. 9, pp. 1326-1333, 1997. [SCI, EI]
  167. Shun-Ching Lee, Ching-Yang Cheng and Cha`o-Kuang Chen, “Finite Element Solution of Laminar and Turbulent Flows with Forced and Mixed Convection in An Air – Cooled Room”, Numerical Heat Transfer Part A. vol. 31, no. 5 p 529-550, 1997. [SCI, EI]
  168. Cha`o-Kuang Chen and Tzu-Li Tien, “A New Forecasting Method GDM(2,2,1) of Dynamics system”, Proc. Royal Society , London A. vol. 453, pp. 879-896, 1997. [SCI, EI]
  169. Yue-Tzu Yang, Pao-Tung Hsu and Cha`o-Kuang Chen, “Laminar film condensation on a finite-size horizontal wavy disk”, J of Appl. Math. Modelling, vol. 21, no. 3, pp. 139-144, 1997. [SCI, EI]
  170. Cha`o-Kuang Chen, J.-M. Lin, and C.-L. Chen, “Error Bounds Estimate of Weighted Residuals Method Using Genetic Algorithms. ”, Applied Mathematics and Computation, vol. 81, pp. 207-219,1997. [SCI, EI]
  171. Cha`o-Kuang Chen and Shing-Huei Ho, “Free vibration analysis of non-uniform Timoshenko beams using differential transform”, Transactions of the CSME, vol. 22, no.3, pp. 231-250, 1998. [SCI, EI]
  172. Eing-Jer Wei, Hsin-Yi Lai and Cha`o-Kuang Chen, “Study on Meshing Characteristic of Spherical Cam-Oscillating Roller-Follower Mechanisms”, Transactions of the Canadian Society for Mechanical Engineering , vol. 22, no. 1, pp. 43-58, 1998. [SCI, EI]
  173. Cha`o-Kuang Chen and L.T.Yu, “Application of Tayler Transformation to the Thermal Stresses in Isotropic Annular Fins”, Journal of Thermal Stresses, vol. 21., pp. 781-809, 1998. [SCI, EI]
  174. Cha`o-Kuang Chen, and Yue-Tzu Yang, “A 2-D inverse method for simultaneous estimation of the inlet temperature and wall heat flux in a laminar circular duct flow”, Numerical Heat Transfer Part A-Applications, vol. 34., pp. 731-745, 1998. [SCI, EI]
  175. Cha`o-Kuang Chen and Tien-Yuan Kuo, “The theory of Center Offset and Its Application in Cutter Manufacture”, Journal of Materials Processing Technology vol. 83, pp217-222, 1998. [SCI, EI]
  176. Cha`o-Kuang Chen and Tien-Yuan Kuo, “A Study of the Geometrical Models of Grinding a Spheroid”, Journal of Materials Processing Technology vol. 83, pp231-233, 1998. [SCI, EI]
  177. Chih-Jer Lin and Cha`o-Kuang Chen, “A Constrained Optimization Approach for Path Planning of Redundant Robot Manipulators”, JSME International Journal, series C, vol. 41, no. 3, pp. 430-442, 1998. [SCI, EI]
  178. Shou-Tao Peng and Cha`o-Kuang Chen, Estimation of the practical stability region of a class of robust controllers with input constraint”, Journal of the Franklin Institute-Engineering and Applied Mathematics, vol. 335B, n 7, pp. 1271-1281, 1998. [SCI, EI]
  179. Ching-Yang Cheng Chen and Cha`o-Kuang Chen, “Transient response of annular fins subjected to constant base temperatures”, International Communications in Heat and Mass Transfer, vol. 25, no. 6, pp. 775-785, 1998. [SCI, EI]
  180. Lien-Tsai Yu and Cha`o-Kuang Chen, “The Solution of the Blasius Equation by the Differential Transformation Method”, Mathl. Comput. Modelling vol. 28, no. 1, pp. 101-111, 1998. [SCI, EI]
  181. Cha`o-Kuang Chen and Min-Hsing Chang, “Stability of hydromagnetic dissipative Couette flow with non-axisymmetric disturbance e”, J. Fluid Mech, vol. 366, pp. 135-158, 1998. [SCI, EI]
  182. Cha`o-Kuang Chen and Min-Hsing Chang, “Hydromagnetic Stability of Current-induced Flow in a small gap Between Concentric Rotating Cylinders”, Proc. R. Soc. Lond. A, vol. 454 , pp. 1857-1873, 1998. [SCI, EI]
  183. Ching-Yang Cheng and Cha`o-Kuang Chen, “Efficiency Optimization of an Irreversible Brayton Heat Engine”, A.S.M.E, J. of Energy Resources Technology, vol. 120, no.2, pp. 143-148, Nov. 1998. [SCI, EI]
  184. Cha`o-Kuang Chen and S.H.Ho, “Analysis of General Elastically End Restrained Non-uniform Beams using Differential Transform”, Applied Mathematical Modeling 22, pp. 219-234 ,1998. [SCI, EI]
  185. C. R. Lin, and Cha`o-Kuang Chen, “Exact solution of heat transfer from a stretching surface with variable heat flux,” Heat and Mass Transfer, vol. 33, pp. 477-480, 1998. [SCI, EI]
  186. Lien-Tsai Yu and Cha`o-Kuang Chen, “Application of Taylor Transformation to Optimize Rectangular Fins with Variable Thermal Parameters” Applied Mathematical Modelling vol. 22, pp. 11-21, 1998. [SCI, EI]
  187. Ching-Yang Cheng and Cha`o-Kuang Chen, “Ecological optimization of an Endoreversible Brayton cycle” Energy Convers. Mgmt. vol. 39, no1/2, pp. 33-44,1998. [SCI, EI]
  188. Pao-Tung Hsu, Yue-Tzu Yang and Cha`o-Kuang Chen, “Simultaneously estimating the initial and boundary Condition in a two-dimension hollow cylinder”, Int. J. eat Transfer, vol. 41, no.1, pp. 219-227,1998. [SCI, EI]
  189. Shou-Tao Peng and Cha`o-Kuang Chen, “A Bounded robust controller design for a class of uncertain systems”, J. of System Analysis Modelling Simulation, vol. 30, pp. 195-224, 1998. [EI]
  190. Tzu-Li Tien and Cha`o-Kuang Chen, “Forecasting CO2 Output From Gas Furnace by the Transfer Function Model DGDM(2,2,1)”, J. of Sysem Analysis, Modelling Simulation vol. 30, pp. 265-287, 1998. [SCI, EI]
  191. Cha`o-Kuang Chen and L.T.Yu, “Optimization of Circular Fins with variable Thermal parameters”, Int. J. of Franklin Institute, vol. 336B, pp. 77-95. 1999. [SCI, EI]
  192. Cha`o-Kuang Chen and Shing-Huei Ho, “Transverse Vibration of a Rotating Twisted Timoshenko Beams under axial loading using differential transform”, International Journal of Mechanical Sciences, vol. 41, pp. 1339-1356, 1999. [SCI, EI]
  193. Cha`o-Kuang Chen and Shing-Huei Ho, “Solving partial differential equations by two-dimensional differential transform method”, Applied Mathematics and Compution, 1999. [SCI, EI]
  194. Ching-Yang Cheng and Cha`o-Kuang Chen, “Ecological Optimization of an irreversible Brayton heat engine”, J. Phys. D: Appl. Phys. 32, pp. 1-8, 1999. [SCI, EI]
  195. Cha`o-Kuang Chen and San-Ching Wu, “A method for measuring and separating cylindrical and spindle errors in machine tool rotational parts”, J. of Meas. Sci. Technol. vol.10, pp. 76-83, 1999. [SCI, EI]
  196. Cha`o-Kuang Chen, Hsin-Yi Lai and Y Tang, “A manufacturing model of carbide-tipped spherical milling cutters”, Proc Inst Mech Engrs, vol. 213, Part B, pp. 713-724,1999. [SCI, EI]
  197. Cha`o-Kuang Chen and Sy-Hong Lin, “Application of the gray predictor on predictive control problems”, SAMS, vol.36, pp. 235-251, 1999. [EI]
  198. Cha`o-Kuang Chen and Chien-Hong Liu, “The Evaluation of spherical Error by a rapidly Searching Method”, 1st International Symposium on Instrumentation Science and Technology, pp. 23-26, Aug.1999. [EI]
  199. Chien-Hong Liu and Cha`o-Kuang Chen, “The Min-Max problem for evaluating the form error of a circle”, Measurement: Journal of the International Measurement Confederation, vol. 26, no. 4, pp. 273-282, 1999. [SCI, EI]
  200. Chih-Jer Lin, Cha`o-Kuang Chen and Chien-Li Chen, “Path Planning and Dynamic Control of a Redundant Robot Manipulator For Conveyor Tracking”, J. of Systems Science, vol.30, no. 5,p 491-503, 1999. [SCI, EI]
  201. G. H. Wu, Cha`o-Kuang Chen and S. H. Ju, “On The Flow of a polymer Melt Passing Over a Transverse Slot”, J. of Polymer Eng. vol.19, no.3, 1999.
  202. Ke-Yang Li, Cha`o-Kuang Chen and Shyue-Cheng Yang, Profile determination of a tube-straightening roller by envelope theory”, Journal of Materials Processing Technology, vol. 94, 2, Sep, pp. 157-166, 1999. [SCI, EI]
  203. Lin, Chih-Jer, Cha`o-Kuang Chen and Chen, Chieh-Li, Path planning and dynamic control of a redundant robot manipulator for conveyor tracking”, International Journal of Systems Science, vol. 30, n 5, pp. 491-503, 1999. [SCI, EI]
  204. Lien-Tsai Yu and Cha`o-Kuang Chen, “Application of the hybrid method to the transient Thermal stresses response in isotropic annular fins”, Journal of Applied Mechanics-Transactions of the ASME, vol. 66, no. 2, pp. 340-346, 1999. [SCI, EI]
  205. Lien-Tsai Yu and Cha`o-Kuang Chen, “Application of the Taylor Transformation to the Transient Temperature Response of an Annular Fin”, Heat Transfer Engineering, vol.20, no.1, 1999. [SCI, EI]
  206. Ke-Yang Li, Cha`o-Kuang Chen and Shyue-Cheng Yang, “Profile Determination of a Tube-Straightening Roller By Envelope Theory”, J. of Materials Processing Technology, vol.94, pp. 157-166, 1999. [SCI, EI]
  207. Cha`o-Kuang Chen and Chien-Hong Liu, “A Study on Analyzing the Problem of the Spherical form Error”, Precision Engineering, vol.24, pp. 119-126, 2000. [SCI, EI]
  208. Cha`o-Kuang Chen and San-Ching Wu, “A mathematical Model for the Evaluation of Conically Tapered Parts”, J. of Materials Processing Technology”, vol.4531, pp. 8-11, 2000. [SCI, EI]
  209. Cha`o-Kuang Chen and Shyue-Cheng Yang, “Geometric modeling for cylindrical and helical gear pumps with circular arc teeth”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.214, no. 4, pp. 599-607, 2000. [SCI, EI]
  210. Cha`o-Kuang Chen, Chi-Chang Wang, “Transient analysis of forced convection along a wavy surface in micropolar fluids”, J. of Thermophysics and Heat Transfer. AIAA, vol.14, issue 3, pp340~347. 2000 [SCI, EI]
  211. Ching-Yang Cheng and Cha`o-Kuang Chen, Maximum power of an endoreversible intercooled Brayton cycle”, International Journal of Energy Research, vol. 24, 6, pp. 485-494, 2000. [SCI, EI]
  212. Eing-Jer Wei, Hsin-Yi Lai and Cha`o-Kuang Chen, “Machine tool setting for the manufacturing of spherical cams”, J. of Materials processing Technology, vol.100, pp. 147-155, 2000. [SCI, EI]
  213. H-T Yau, Cha`o-Kuang Chen, Chieh-Li Chen, “Chaos and bifurcation analysis of a flexible rotor supported by short journal bearings with non-linear suspension”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.214, no. 7, pp. 931-947, 2000. [SCI, EI]
  214. Her-Terng Yau, Cha`o-Kuang Chen and Chieh-Li Chen, “Sliding Mode Control of Chaotic System with Uncertainties”, International Journal of Bifurcation and Chaos, vol. 10, no.5, pp. 1139-1147, 2000. [SCI, EI]
  215. Hsin-Yi Lai, Wen-Yuh Jywe, Cha`o-Kuang Chen and Chien-Hong Liu, “Precision Modeling of form errors for Cylindricity evaluation using Genetic Algorithms”, J. of the International Societies for Precision Engineering and Nanotechnology, vol. 24, pp. 310-319, 2000. [SCI, EI]
  216. Jiin-Hong Lin, Cha`o-Kuang Chen, Yue-Tzu Yang, “Inverse estimation of the thermal boundary behavior of a heated cylinder normal to a laminar air stream”, International Journal of Heat and Mass transfer, vol.43, pp. 3991-4001,2000. [SCI, EI]
  217. J. J. Hwang, W. J. Wang and Cha`o-Kuang Chen, “Buoyancy-Driven Flow Reversal Phenomena in Radially Rotation Serpentine Ducts”, Journal of Heat Transfer-Transactions of the ASME, vol.122, pp. 179-183, 2000. [SCI, EI]
  218. Po-Jen Cheng, Hsin-Yi Lai and Cha`o-Kuang Chen, “Stability Analysis of thin Viscoelastic Liquid Film flowing Down on a Vertical Wall”, J. Phys, D: Appl. Phys, vol.33, pp. 1674-1682, 2000. [SCI, EI]
  219. Pao-Tung Hsu, Cha`o-Kuang Chen, Chi-Chang Wang, “Mixed convection of micropolar fluids along a vertical wavy surface”, Acta Mechanica, vol. 144, pp. 231-247, 2000. [SCI, EI]
  220. Pao-Tung Hsu, Yue-Tzu Yang and Cha`o-Kuang Chen, “A Three-Dimensional Inverse Problem of Estimating the Surface Thermal Behavior of the Working Roll in Rolling Process”, Transactions of the ASME, Journal of Manufacturing Science and Engineering, vol.122, February 2000. [SCI, EI]
  221. Shyue-Cheng Yang and Cha`o-Kuang Chen, “Applying two-parameter envelope theory to determining spherical cam profile with cylindrical followers”, Transactions of the Canadian Society for Mechanical Engineering, vol.24, no.2, pp. 415-435, 2000. [SCI, EI]
  222. Shou-Tao Peng and Cha`o-Kuang Chen, “Contrained Robust stabilization of a class of uncertain systems: A case study on Estimating the practical stability Region”, SAMS. vol.41, pp. 223-241, 2000 [SCI, EI]
  223. Y-C Huang, Chen-I Hung and Cha`o-Kuang Chen, “An ecological exergy analysis for an irreversible Braytonengine with an external heat source”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Mechanical Engineering Science, vol.214, pp. 413-421, 2000. [SCI, EI]
  224. Y-C Huang, Chen-I Hung and Cha`o-Kuang Chen, “Exergy analysis for a combined system of steam-injection gas Turbine Cogeneration and multiple-effect Evaporation”, Inst Mech. Engrs. U. K. vol.214, part A, pp. 61-73, 2000. [SCI, EI]
  225. Y-J Yang, Z-S Yan and Cha`o-Kuang Chen, Numerical study of turbulent heat transfer and flow characteristics of hot flow over a sudden-expansion with base mass injection”, Acta Mechanica, vol. 144, pp. 57-69, 2000. [SCI, EI]
  226. Bing-Yin Ren, Yu-Yong Tang and Cha`o-Kuang Chen, “The general geometrical models of the design and 2-axis NC machining of a helical end-mill with constant pitch”, Journal of Materials Processing Technology, vol. 115, pp. 265-270, 2001. [SCI, EI]
  227. Chang-Tzuoh Wu and Cha`o-Kuang Chen, “Study on rotating cutters with different definitions of helical angle”, International Journal of Advanced Manufacturing Technology, vol.17, pp. 627-638, 2001. [SCI, EI]
  228. Chang-Tzuoh Wu, Cha`o-Kuang Chen and Yu-Yong Tang, “Modelling and computer simulation of grinding of the ball end type rotating cutter with a constant helical angle”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, pp. 1581-1594, 2001. [SCI, EI]
  229. Chang-Tzuoh Wu and Cha`o-Kuang Chen, “Manufacturing models for the design and NC grinding of a revolving tool with a circular arc generatrix”, Journal of Materials Processing Technology, vol.116, pp. 114-123, 2001. [SCI, EI]
  230. Chang-Tzuoh Wu and Cha`o-Kuang Chen, “Study on the form error evaluation model of a conical-shank ball-end milling cutter”, International Journal of Advanced Manufacturing Technology, vol. 18, pp. 851-862, 2001. [SCI, EI]
  231. Cha`o-Kuang Chen and Her-Terng Yau, “Bifurcation in a flexible rotor supported by short journal bearings with nonlinear suspension”, JVC/Journal of Vibration and Control, vol. 7, pp. 653-673, 2001. [SCI, EI]
  232. Cha`o-Kuang Chen, Hsin-Yi Lai, Chang-Tzuoh Wu and T-J Li, “A high-precision tool model for helical pinion cutters”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, pp. 161-168, 2001 [SCI, EI]
  233. Cha`o-Kuang Chen and Jin-Mu Lin, “A multi-objective fuzzy optimization for optimum dimensions design of a convective spine”, International Communications in Heat and Mass Transfer, vol.28, no.1, pp. 67-76, 2001. [SCI, EI]
  234. Cha`o-Kuang Chen, Jiin-Hong Lin and Yue-Tzu Yang, “Inverse Method for Estimation Thermal Conductivity in One Dimensional Heat Conduction Problems”, Journal of Thermophysics and Heat Transfer, vol. 15, no.1, pp. 34-41, 2001. [SCI, EI]
  235. Cha`o-Kuang Chen, T. S. Chiou, Z-H Fong, and Cheng-Kang Lee, “Mathematical model of curvature analysis for conjugate surfaces with generalized motion in three dimensions”, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 215, pp. 487-502, 2001 [SCI, EI]
  236. Cha`o-Kuang Chen and C-Y Wang, “Compensating analysis of a double circular-arc helical gear by computerized simulation of meshing”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 215, no.7, pp. 759-772, 2001 [SCI, EI]
  237. Cha`o-Kuang Chen and Ruenn-Yat Lin, “A study of manufacturing models for ball-end type rotating cutters with constant pitch helical grooves”, International Journal of Advanced Manufacturing Technology, vol. 18, no.3, pp. 157-167, 2001 [SCI, EI]
  238. Cha`o-Kuang Chen, Wen-Yuh Jywe and Jiin-Hong Lin, “Quality assurance of milling cutters- a contribution of multicomponent tolerancing”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, pp. 1571-1580, 2001. [SCI, EI]
  239. Chen-I Hung, Cha`o-Kuang Chen, and Zong-Yi Lee, “Thermoelastic Transient Response of Multilayered Hollow Cylinder with Initial Interface Pressure”, Journal of Thermal Stresses, vol. 24, pp. 987-1006, 2001. [SCI, EI]
  240. Cheng-Kang Lee and Cha`o-Kuang Chen, “An efficient method for determining the critical modification coefficient for cylindrical worm gearing in which the worm is generated by a curve”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, pp. 1745-1755, 2001. [SCI, EI]
  241. Cheng-Kang Lee and Cha`o-Kuang Chen, “Determination of the critical modification coefficient for a cylindrical worm gear drive with the worm generated by a surface of revolution”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, pp. 1425-1436, 2001. [SCI, EI]
  242. Cheng-Chi Wang and Cha`o-Kuang Chen, “Bifurcation analysis of self-acting gas journal bearings”, Journal of Tribology-Transactions of The ASME, vol. 123, pp. 755-767, 2001. [SCI, EI]
  243. Chi-Chang Wang and Cha`o-Kuang Chen, “Transient force and free convection along a vertical wavy surface in micropolar fluids”, International Journal of Heat and Mass Transfer, vol. 44, pp. 3241-3251, 2001 [SCI, EI]
  244. Chien-Hong Liu, Cha`o-Kuang Chen and Wen-Yuh Jywe, “Evaluation of straightness and flatness using a hybrid approach-genetic algorithms and geometric characterization method”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, no. 3, 2001. [SCI, EI]
  245. Der-Sheng Wu, Hsin-Yi Lai and Cha`o-Kuang Chen, “New approach to enhance the manufacturing accuracy of the cylindrical worm using measured circular-arc helicoidal profile data”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 215, pp. 47-57, 2001. [SCI, EI]
  246. Hsin-Yi Lai, Cha`o-Kuang Chen and Der-Sheng Wu, “A high-precision circular helicoidal surface meshing model for producing high-performance lead screws”, International Journal of Advanced Manufacturing Technology, vol. 18, pp. 553-566, 2001. [SCI, EI]
  247. Jiin-Hong Lin, Cha`o-Kuang Chen and Yen-Juei Lin, ”An Improved inverse Method for Refractive Index Reconstruction of Ion-exchanged Waveguides”, Journal of Optical Communication, vol.22, pp. 1-6, 2001 [SCI, EI]
  248. Min-Hsing Chang, Cha`o-Kuang Chen and Jiin-Hong Lin, “The inverse estimation of local heat transfer coefficient in a vertical plate fin with its base subjected to periodically oscillated temperature”, Numerical Heat Transfer Part A-Applications, vol. 40, pp. 253-271, 2000. [SCI, EI]
  249. Ming-Jyi Jang and Cha`o-Kuang Chen, “Bifurcation analysis in flexible rotor supported active magnetic bearing”, International Journal of Bifurcation and Chaos, vol. 11, no. 8, 2001. [SCI, EI]
  250. Pao-Tung Hsu, Yih-Hsiung Liu, Sheng-Gwo Wang and Cha`o-Kuang Chen, ”An Inverse Approach for Estimation of the Surface Heat Flux Distribution on a Horizontal Elliptical Tube with Laminar Film Condensation”, Chemical Engineering Journal, vol.3832, pp. 1-7, 2001 [SCI, EI]
  251. Po-Jen Cheng, Cha`o-Kuang Chen and Hsin-Yi Lai, “ Nonlinear stability analysis of the thin micropolar liquid film flowing down on a vertical cylinder”, Transactions of the ASME, Journal of Fluids Engineering, vol.123, pp. 411-421, 2001 [SCI, EI]
  252. Po-Jen Cheng, Cha`o-Kuang Chen, Hsin-Yi Lai, “Nonlinear stability analysis of the thin viscoelastic film flow traveling down along a vertical cylinder”, Nonlinear Dynamics, vol. 24, pp. 305-332, 2001. [SCI, EI]
  253. Po-Jen Cheng, Cha`o-Kuang Chen, and Hsin-Yi Lai, “Nonlinear stability analysis of the thin pseudoplastic liquid film flowing down along a vertical wall”, Journal of Applied Physics, vol.89, no.12, pp. 8238-8246, 2001 [SCI, EI]
  254. Shou-Tao Peng and Cha`o-Kuang Chen, “Constrained robust stabilization of a class of uncertain systems: a case study on estimating the practical stability region”, SAMA, vol. 41, pp. 223-241, 2001. [SCI, EI]
  255. Shyue-Cheng Yang and Cha`o-Kuang Chen, “Geometric model of a rolling process for multi-wave tubes”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 215, no. C5, pp. 533-546, 2001. [SCI, EI]
  256. Shyue-Cheng Yang and Cha`o-Kuang Chen, “The surface geometry of rollers with skew rolling of steel balls”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 215, pp. 523-532, 2001. [SCI, EI]
  257. Wei-Fang Chen, Hsin-Yi Lai and Cha`o-Kuang Chen, “A Precision tool model for concave-cone end-milling cutters”,International Journal of Advanced Manufacturing Technology, vol. 18, pp. 567-578, 2001. [SCI, EI]
  258. Zong-Yi Lee, Cha`o-Kuang Chen and Chen-I Hung, “Transient Thermal stress analysis of multilayered hollow cylinder”, Acta Mechanica, vol. 151, pp. 75-88, 2001. [SCI, EI]
  259. Cha`o-Kuang Chen and Chang-Tzuoh Wu, “The region division and NC machining of compound surfaces”, Journal of Materials Processing Technology, vol. 121, no. 1, pp. 5-14, 2002. [SCI, EI]
  260. Cha`o-Kuang Chen, Chen-I Hung and Zong-Yi Lee, “Double side approach method to obtain solutions for transient nonlinear heat conduction using genetic algorithms”, Applied Mathematics and Computation, vol.133, pp. 431-444, 2002. [SCI, EI]
  261. Cha`o-Kuang Chen, Chun-I Chen and Yue-Tzu Yang, “Unsteady unidirectional flow of a Maxwell fluid in a circular duct with different given volume flowrate conditions”, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science,  vol. 216, no. 5, pp. 583-590, 2002. [SCI, EI]
  262. Cheng-Chi Wang, Cheng-Ying Lo and Cha`o-Kuang Chen, “Nonlinear dynamic analysis of a flexible rotor supported by externally pressurized porous gas journal bearings”, Journal of Tribology-Transactions of the ASME, vol. 124, no. 3, pp. 553-561, 2002. [SCI, EI]
  263. Chi-Chang Wang and Cha`o-Kuang Chen, “Mixed convection boundary layer flow of non-Newtonian fluids along vertical wavy plates”, International Journal of Heat and Fluid Flow, vol. 23, no. 6, pp. 831-839, 2002. [SCI, EI]
  264. Chi-Chang Wang and Cha`o-Kuang Chen, “Forced convection in a wavy-wall channel”, International Journal of Heat and Mass Transfer, vol. 45, no. 12, pp. 2587-2595, 2002. [SCI, EI]
  265. Chi-Chang Wang and Cha`o-Kuang Chen, “Three-dimensional inverse heat transfer analysis during the grinding process”, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 216, no. 2, p199-212, 2002. [SCI, EI]
  266. Chi-Chang Wang and Cha`o-Kuang Chen, “Forced Convection in a wavy-wall channel”, International Jouranl of Heat and Mass Transfer, vol. 45, no. 12, 2587-2595, 2002. [SCI, EI]
  267. Chi-Chang Wang, Cha`o-Kuang Chen, “Combined free and forced convection film condensation on a finite-size horizontal wavy plate”, Journal of Heat Transfer-Transactions of the ASME, vol. 124, no. 3, pp. 573-576, 2002. [SCI, EI]
  268. Ching-Huang Chiu and Cha`o-Kuang Chen, “A decomposition method for solving the convective longitudinal fins with variable thermal conductivity”, International Journal of Heat and Mass Transfer, vol. 45, no. 10, pp. 2067-2075, 2002. [SCI, EI]
  269. Ching-Huang Chiu and Cha`o-Kuang Chen, “Application of the decomposition method to thermal stresses in isotropic circular fmis with temperature-dependent thermal conductivity”, Acta Mechanica, vol. 157, pp. 147-158, 2002. [SCI, EI]
  270. Ching-Huang Chiu and Cha`o-Kuang Chen, “A decomposition method for solving the convective longitudinal fins with variable thermal conductivity”, International Journal of Heat and Mass Transfer, vol. 45, no. 10, pp. 2067-2075, 2002. [SCI, EI]
  271. Ching-Huang Chiu and Cha`o-Kuang Chen, “Thermal stresses in annular fins with temperature-dependent conductivity under periodic boundary condition”, Journal of Thermal Stresses, vol. 25, pp. 475-492, 2002. [SCI, EI]
  272. Der-Sheng Wu, Hsin-Yi Lai and Cha`o-Kuang Chen, “Mathematical modelling of elliptic helicoid screw transmission systems”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 216, no. 2, pp. 265-280, 2002. [SCI, EI]
  273. Hsin-Yi Lai, Cha`o-Kuang Chen, and Yen-Liang Yeh, “Double-mode modeling of chaotic and bifurcation dynamics for a simply-supported rectangular plate in large deflection”, Int. J. of Non-Linear Mechanics, vol. 37, no. 2, pp. 331-343, 2002. [SCI, EI]
  274. Hung-Chang Lee, Cha`o-Kuang Chen and Chen-I Hung, “A modified group-preserving scheme for solving the initial value problems of stiff ordinary differential equations”, Applied Mathematics and Computation, vol. 133, pp. 445-459, 2002. [SCI, EI]
  275. Jiin-Hong Lin, Cha`o-Kuang Chen and Yue-Tzu Yang, “An inverse method for simultaneous estimation of the center and surface thermal behavior of a heated cylinder normal to a turbulent air stream”, Journal of Heat Transfer-Transactions of the ASME, vol. 124, no. 4, pp. 601-608, 2002. [SCI, EI]
  276. Jiin-Hong Lin and Cha`o-Kuang Chen, “An inverse algorithm to calculate the refractive index profiles of periodically segmented waveguides from the measured near-field intensities”, Journal of Lightwave Technology, vol. 20, no. 1, pp. 58-64, 2002. [SCI, EI]
  277. Jiin-Hong Lin, Cha`o-Kuang Chen and Lin, Yen-Juei, “An improved inverse method for refractive index reconstruction of ion-exchanged waveguides”, Journal of Optical Communications, vol. 23, no. 1, pp. 29-34, 2002. [EI]
  278. Min Hsing Chang and Cha`o-Kuang Chen, “The stability of the narrow-gap Taylor-Couette system with an axial flow”, Acta Mechanica, vol. 156, pp. 131-143, 2002. [SCI, EI] (NSC 88-2212-E-132-003)
  279. Ming-Jyi Jang, Chieh-Li Chen and Cha`o-Kuang Chen, “Sliding mode control of hyperchaos in Rossler systems”, Chaos, Solitons and Fractals, vol. 14, no. 9, pp. 1465-1476, 2002. [SCI, EI] (NSC 89-2212-E-269-011)
  280. Pao-Tung Hsu, Yih-Hsiung Liu, Sheng-Gwo Wang and Cha`o-Kuang Chen, “An inverse approach for estimation of the surface heat flux distribution on a horizontal elliptical tube with laminar film condensation”, Chemical Engineering Journal, vol. 85, pp. 189-195, 2002. [SCI, EI]
  281. Shih-Chieh Wang, Cha`o-Kuang Chen, and Yue-Tzu Yang, “Natural convection of non-Newtonian fluids through permeable axisymmetric and two-dimensional bodies in a porous medium”, International Journal of Heat and Mass transfer, vol. 45, pp. 393-408, 2002. [SCI, EI]
  282. Shyue-Cheng Yang, Cha`o-Kuang Chen and Ke-Yang Li, “A geometric model of a spherical gear with a double degree of freedom”, Journal of Materials Processing Technology, vol. 123, no. 2, pp. 219-224, 2002. [SCI, EI] (NSC 85-2212-E-006-075)
  283. Tzong-Mou Wu and Cha`o-Kuang Chen, “Application of graphical operation method to the dynamics and relative-motion problems”, Applied Mathematics and Computation, vol. 132, no. 1, pp. 205-218, 2002. [SCI, EI]
  284. Yen-Liang Yeh, Cha`o-Kuang Chen and Hsin-Yi Lai, “Chaotic and bifurcation dynamics for a simply supported rectangular plate of thermo-mechanical coupling in large deflection”, Chaos Solitons & Fractals, vol. 13, pp. 1493-1506, 2002. [SCI, EI] (NSC 89-2212-E-006-196)
  285. Wei-Fang Chen, Hsin-Yi Lai and Cha`o-Kuang Chen, “Design and NC machining of concave-arc ball-end milling cutters”, International Journal of Advanced Manufacturing Technology, vol. 20, no.3, pp. 169-179, 2002. [SCI, EI]
  286. Zong-Yi Lee, Cha`o-Kuang Chen and Chen-I Hung, “Upper and lower bounds of the solution for an elliptic plate problem using a genetic algorithm”, Acta Mechanica, vol. 157, pp. 201-212, 2002. [SCI, EI]
  287. Bor-Lih Kuo and Cha`o-Kuang Chen, “Application of a hybrid method to the solution of the nonlinear Burgers' equation”, Journal of Applied Mechanics-Transactions of The ASME, vol. 70 (6), pp. 926-929, 2003. [SCI, EI]
  288. Cheng-Chi Wang and Cha`o-Kuang Chen, “Bifurcation analysis of externally pressurized porous gas journal bearings”, Proceedings of The Institution of Mechanical Engineers Part C- Journal of Mechanical Engineering Science, vol. 217, pp. 1325-1338, 2003. [SCI, EI]
  289. Chun-I Chen, Cha`o-Kuang Chen and Yue-Tzu Yang, “Unsteady unidirectional flow of second grade fluid between the parallel plates with different given volume flow rate conditions”, Applied Mathematics and Computation, vol. 137, pp. 437-450, 2003. [SCI, EI]
  290. Chun-I Chen, Cha`o-Kuang Chen and Yue-Tzu Yang, “Weakly nonlinear stability analysis of thin viscoelastic film flowing down on the outer surface of a rotating vertical cylinder”, International Journal of Engineering Science, vol. 41, no. 12, p1313-1336, 2003. [SCI, EI]
  291. Chun-I Chen, Yue-Tzu Yang and Cha`o-Kuang Chen, “Unsteady unidirectional flow of a Voigt fluid between the parallel surfaces with different given volume flow rate conditions”, Applied Mathematics and Computation, vol. 144, pp. 249-260, 2003. [SCI, EI]
  292. Ching-Huang Chiu and Cha`o-Kuang Chen, “Application of Adomian's decomposition procedure to the analysis of convective-radiative fins”, Journal of Heat Transfer-Transactions of the ASME, vol. 125, no. 2, pp. 312-316, 2003. [SCI, EI]
  293. Cha`o-Kuang Chen and Hai-Ping Hu, “Turbulent film condensation on a half oval body”, International Journal of Heat and Mass Transfer, vol. 46, no. 22, pp. 4271-4277, 2003. [SCI, EI]
  294. Cha`o-Kuang Chen and Hai-Ping Hu, “Turbulent film condensation on a horizontal elliptical tube”, Journal of Heat Transfer-Transactions of the ASME, vol. 125 (6), pp. 1194-1197, 2003. [SCI, EI]
  295. C-K Liang, G-S Young, J-J-J Chen, and Cha`o-Kuang Chen, “A microcontroller-based implantable neuromuscular stimulation system with wireless power and data transmission for animal experiments”, Journal of The Chinese Institute of Engineers, vol. 26 (4), pp. 493-501, 2003. [SCI, EI]
  296. Jin-Mu Lin and Cha`o-Kuang Chen, “Error bounds estimate of nonlinear boundary value problems using method of weighted residuals with genetic algorithms”, Applied Mathematics and Computation, vol. 144, pp. 261-271, 2003. [SCI, EI]
  297. Min Hsing Chang and Cha`o-Kuang Chen, “Current-induced instabilities of hydromagnetic flow in a small gap between rotating conducting cylinders”, Acta Mechanica, vol. 162, pp. 125-141, 2003. [SCI, EI]
  298. Min Hsing Chang, Cha`o-Kuang Chen, and Huei Chu Weng, “Stability of ferrofluid flow between concentric rotating cylinders with an axial magnetic field”, International Journal of Engineering Science, vol. 41, no. 2, pp. 103-121, 2003. [SCI, EI] (NSC 89-2212-E-132-003)
  299. Shih-Chieh Wang, Yue-Tzu Yang and Cha`o-Kuang Chen, “Effect of uniform suction on laminar filmwise condensation on a finite-size horizontal flat surface in a porous medium”, International Journal of Heat and Mass Transfer, vol. 46, no. 21, pp. 4003-4011, 2003. [SCI, EI]
  300. Wei-Fang Chen, Hsin-Yi Lai and Cha`o-Kuang Chen, “Quality assurance for concave-arc ball-end milling cutters”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 217, no. 2, pp. 181-191 2003. [SCI, EI]
  301. Yen-Liang Yeh, Cha`o-Kuang Chen and Hsin-Yi Lai, “Chaotic and bifurcation dynamics of a simply-supported thermo-elastic circular plate with variable thickness in large deflection”, Chaos Solitons & Fractals, vol. 15, no. 5, pp. 811-829, 2003. [SCI, EI]
  302. C-C Wang, M-J Jang, and Cha`o-Kuang Chen “Non-linear dynamic analysis of a flexible rotor supported by self-acting gas journal bearings”,PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 218 (12): 1527-1538 DEC 2004. [SCI, EI]
  303. Chien-Hong Liu, Wen-Yuh Jywe and Cha`o-Kuang Chen, “Quality assessment on a conical taper part based on the minimum zone definition using genetic algorithms”, International Journal of Machine Tools & Manufacture, vol. 44, pp. 183-190, 2004. [SCI, EI]
  304. Chun-I Chen, Cha`o-Kuang Chen and Yue-Tzu Yang, “Unsteady unidirectional flow of an Oldroyd-B fluid in a circular duct with different given volume flow rate conditions”, Heat and Mass Transfer, vol. 40, pp. 203-209, 2004. [SCI, EI]
  305. Chun-I Chen, Cha`o-Kuang Chen and Yue-Tzu Yang, “Perturbation analysis to the nonlinear characterization of thin condensate falling stability film on the outer surface of a rotating vertical cylinder”, International Journal of Heat and Mass Transfer, vol. 47, pp. 1937-1951, 2004. [SCI, EI]
  306. Chun-I Chen, Cha`o-Kuang Chen and Yue-Tzu Yang, “Unsteady unidirectional flow of Bingham fluid between parallel plates with different given volume flow rate conditions”, Applied Mathematical Modelling, vol. 28, pp. 697-709, 2004. [SCI, EI]
  307. Cha`o-Kuang Chen, B-H Chen, and Yue-Tzu Yang, “Atomic force microscopy tip noise induced by adhesion”, Nanotechnology, vol. 15, pp. 1771-1778, 2004. [SCI, EI]
  308. Cha`o-Kuang Chen and Hai-Ping Hu, “Turbulent film condensation on a vertical wedge”, Applied Thermal Engineering, vol. 24, pp. 2267-2279, 2004. [SCI, EI]
  309. Cha`o-Kuang Chen and Shin-Ping Ju, “Application of differential transformation to transient advective- Dispersive transport equation”, Applied Mathematics and Computation, vol. 155, pp. 25-38, 2004. [SCI, EI]
  310. Cha`o-Kuang Chen and Shiu-Shin Chen, “Application of the differential transformation method to a non-linear conservative system”, Applied Mathematics and Computation, vol. 154, pp. 431-441, 2004. [SCI, EI]
  311. D-T-W Lin and Cha`o-Kuang Chen, “A molecular dynamics simulation of TIP4P and lennard-jones water in nanochannel”, ACTA Mechanica, vol. 173, pp. 181-194, 2004. [SCI, EI]
  312. J-J Hwang, D-Y, Wang, N-C Shih, D-Y Lai, and Cha`o-Kuang Chen, “Development of fuel-cell-powered electric bicycle”, Journal of Power Sources, vol. 133, pp. 223-228, 2004. [SCI, EI]
  313. J-J Hwang, Cha`o-Kuang Chen, R-F Savinell, C-C Liu, and J Wainright, “A three-dimensional numerical simulation of the transport phenomena in the cathodic side of a PEMFC”, Journal of Applied Electrochemistry, vol. 34, pp. 217-224, 2004. [SCI, EI]
  314. Shih-Ming Lin, Cha`o-Kuang Chen, and Y-T Yang, “A modified sequential approach for solving inverse heat conduction problems”, International Journal of Heat and Mass Transfer, vol. 47, pp. 2669-2680, 2004. [SCI, EI]
  315. Tzong-Mou Wu and Cha`o-Kuang Chen, “Graphical operation of vectors and matrices”, Applied Mathematics and Computation, vol. 149, pp. 259-276, 2004. [SCI, EI]
  316. Tzong-Mou Wu and Cha`o-Kuang Chen, “Kinematics representations of graphical operation methods”,Applied Mathematics and Computation, vol.155, pp. 573-590, 2004. [SCI, EI]
  317. Yen-Liang Yeh and Cha`o-Kuang Chen, “Chaotic and bifurcation for a simply-supported thermo-mechanical coupling circular plate with variable thickness”, Chaos Solitons & Fractals, vol. 22, pp. 1013-1030, 2004. [SCI, EI]
  318. Wen-Lih Chen, Zengyuan, Guo, and Cha`o-Kuang Chen, “A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model”, International Journal of Heat and Mass Transfer, vol. 47, pp. 3431-3439, 2004. [SCI, EI]
  319. Chao-Kuang Chen and Y-F Su, “Exergetic efficiency optimization for an irreversible brayton refrigeration cycle”, International Journal of Thermal Sciences, vol. 44, pp. 303-310, 2005. [SCI, EI]
  320. Chi-Chang Wang and Cha`o-Kuang Chen, “Mixed convection boundary layer flow on inclined wavy plates including the magnetic field effect ”, International Journal of Thermal Sciences, vol. 44, pp. 577-586, 2005. [SCI, EI]
  321. C-C WangandCha`o-Kuang Chen “Forced convection in micropolar fluid flow through a wavy-wall channel”,Numerical Heat Transfer Part A-Applications, vol. 48, pp. 879-900, 2005. [SCI, EI]
  322. C-H Liu, W-Y Jywe, and Cha`o-Kuang Chen “Development of a simple system for the simultaneous measurement of pitch, yaw and roll angular errors of a linear stage”,International Journal of Advanced Manufacturing Technology, vol. 26, 808-813, 2005. [SCI, EI]
  323. C-I Chen, Cha`o-Kuang Chen, andY-T Yang “Non-linear stability analysis of a thin Newtonian film flowing down an infinite vertical rotating cylinder”,Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 219, 911-923, 2005. [SCI, EI]
  324. C-I Chen, Cha`o-Kuang Chen, andY-T Yang “Nonlinear stability analysis of thin Newtonian film flowing down on the inner surface of a rotating vertical cylinder”,Acta Mechanica, vol.179, 227-248 2005. [SCI, EI]
  325. C-I Chen, Cha`o-Kuang Chen, andY-T Yang “Nonlinear stability analysis of thin viscoelastic film flowing down on the inner surface of a rotating vertical cylinder”,Nonlinear Dynamics, vol. 42, 1-23,  2005. [SCI, EI]
  326. Cha`o-Kuang Chen andHuei Chu Weng “Natural convection in a vertical microchannel”,Journal of Heat Transfer-Transactions of the ASME, vol. 127, no. 9, pp. 1053-1056, 2005. [SCI, EI]
  327. Cha`o-Kuang Chen, L-W Wu, andY-T Yang “Estimation of unknown outer-wall heat flux in turbulent circular pipe flow with conduction in the pipe wall”,International Journal of Heat and Mass Transfer, vol.48, 3971-3981, 2005. [SCI, EI]
  328. Cha`o-Kuang Chen andD-T-W Lin “TIP4P potential for lid-driven cavity flow”,Acta Mechanica, vol.178, 223-237, 2005. [SCI, EI]
  329. Hai-Ping Hu and Cha`o-Kuang Chen, “Turbulent film condensation on an isothermal sphere”, Journal of Thermophysics and Heat Transfer, vol. 19, pp. 81-86, 2005. [SCI, EI]
  330. J-J Hwang, Cha`o-Kuang Chen, and D-Y Lai, “Computational analysis of species transport and electrochemical characteristics of a MOLB-type SOFC”, Journal of power Sources, vol. 140, pp. 235-242, 2005. [SCI, EI]
  331. J-J Hwang, Cha`o-Kuang Chen, andD-Y Lai “Detailed characteristic comparison between planar and MOLB-type SOFCs”,Journal of power Sources, vol. 143, 75-83, 2005. [SCI, EI]
  332. Shih-Chieh Wang, Cha`o-Kuang Chen, and Yue-Tzu Yang, “Film condensation on a finite-size horizontal wavy plate bounded by a homogenous porous layer”, Applied Thermal Engineering, vol. 25, pp. 577-590, 2005. [SCI, EI]
  333. Tzong-Mou Wu and Chao-Kuang Chen, “Mathematical model and its simulation of exactly mechanism synthesis with adjustable link”, Applied Mathematics and Computation, vol.160, pp. 309-316, 2005. [SCI, EI]
  334. T-M WuandCha`o-Kuang Chen “Computer-aided curvature analyses of planar four-bar linkage mechanism”,Applied Mathematics and Computation, vol168, 1175-1188, 2005. [SCI, EI]
  335. Zong-Yi Lee, Cha`o-Kuang Chen, andChen-I Hung “Hybrid numerical method applied to multilayered hollow cylinder with time-dependent boundary conditions”,Journal of Thermal Stresses, vol.28, 839-860, 2005. [SCI, EI]
  336. Cha`o-Kuang Chen and YM Tsao, “A stability analysis of turning a tailstock supported flexible work-piece”, International Journal of Machine Tools & Manufacture, vol. 46, no. 1, pp. 18-25, 2006. [SCI, EI] 
  337. Cha`o-Kuang Chen, LW Wu, and YT Yang, “Estimation of time-varying inlet temperature and heat flux in turbulent circular pipe flow”, Journal of Heat Transfer-Transactions of the ASME, vol. 128, no. 1, pp. 44-52, 2006. [SCI, EI]
  338. HP Hu and Cha`o-Kuang Chen, “Turbulent film condensation on an isothermal cone surface”, Heat and Mass Transfer, vol. 42, no. 5, pp. 378-386, 2006. [SCI, EI]
  339. SC Wang, Cha`o-Kuang Chen, and YT Yang, “Steady filmwise condensation with suction on a finite-size horizontal flat plate embedded in a porous medium based on Brinkman and Darcy models”, International Journal of Thermal Sciences, vol. 45, no. 4, pp. 367-377, 2006. [SCI, EI]
  340. CR Su and Cha`o-Kuang Chen, “The inverse prediction of the geometry of a two dimensional plate with a rectangular cavity”, Progress on Advanced Manufacture for Micro/Nano Technology 2005, PT 1 and 2, vol. 505-507, pp. 1105-1110, 2006. [SCI, EI]
  341. CC Wang and Cha`o-Kuang Chen, “Thermophoretic deposition of particles from a boundary layer flow onto a continuously moving wavy surface”, ACTA Mechanica, vol. 181, no. 3-4, pp. 139-151, 2006. [SCI, EI]
  342. CI Chen, Cha`o-Kuang Chen, and YT Yang, “Nonlinear stability analysis of thin condensate falling film inside a rotating vertical cylinder”, International Journal of Heat and Mass Transfer, vol. 49, no. 3-4, pp. 707-717, 2006. [SCI, EI]
  343. HP Hu and Cha`o-Kuang Chen, “Simplified approach of turbulent film condensation on an inclined elliptical tube”, International Journal of Heat and Mass Transfer, vol. 49, no. 3-4, pp. 640-648, 2006. [SCI, EI]
  344. Cha`o-Kuang Chen, TS Yen, and YT Yang, “Lattice Boltzmann method simulation of backward-facing step on convective heat transfer with field synergy principle”, International Journal of Heat And Mass Transfer, vol. 49, no. 5-6, pp. 1195-1204, 2006. [SCI, EI]
  345. Cha`o-Kuang Chen, CS Lee, and CY Cheng, “Magnetic field effects on laminar film condensation on a finite-size horizontal wavy disk”, Chemical Engineering Communications, vol. 193, no. 7, pp. 840-854, 2006. [SCI, EI]
  346. Cha`o-Kuang Chen, YC Hung, CK Chen, et al., “Image-processing algorithms realized by discrete-time cellular neural networks and their circuit implementations”, Chaos Solitons & Fractals, vol. 29, no. 5, pp. 1100-1108, 2006. [SCI, EI]
  347. Cha`o-Kuang Chen, LW Wu, and YT Yang, “Application of the inverse method to the estimation of heat flux and temperature on the external surface in laminar pipe flow”, Applied Thermal Engineering, vol. 26, no. 14-15, pp. 1714-1724, 2006. [SCI, EI]
  348. SC Wang, Cha`o-Kuang Chen, and YT Yang, “Steady filmwise condensation on a finite-size horizontal disk in a homogeneous porous layer”, Chemical Engineering Communications, vol. 193, no. 10, pp. 1217-1231, 2006. [SCI, EI]
  349. Cha`o-Kuang Chen and YM Tsao, “A stability analysis of regenerative chatter in turning process without using tailstock”, International Journal of Advanced Manufacturing Technology, vol. 29, no. 7-8, pp. 648-654, 2006. [SCI, EI]
  350. Cha`o-Kuang Chen and Huei Chu Weng, “Developing natural convection with thermal creep in a vertical microchannel”, Journal of Physics D-Applied Physics, vol. 39, no. 14, pp. 3107-3118, 2006. [SCI, EI]
  351. Cha`o-Kuang Chen and JK Kuo, “Nylon 6/CB polymeric conductive plastic bipolar plates for PEM fuel cells”, Journal of Applied Polymer Science, vol. 101, no. 5, pp. 3415-3421, 2006. [SCI, EI]
  352. HP Hu and Cha`o-Kuang Chen, “Forced convection in film condensation on a horizontal elliptical tube”, Heat Transfer Engineering, vol. 27, no. 9, pp. 60-67, 2006. [SCI, EI]
  353. Cha`o-Kuang Chen, TS Yen, and YT Yang, “Lattice Boltzmann method simulation of a cylinder in the backward-facing step flow with the field synergy principle”, International Journal of Thermal Sciences, vol. 45, no. 10, pp. 982-989, 2006. [SCI, EI]
  354. SH Ho and Cha`o-Kuang Chen, “Free transverse vibration of an axially loaded non-uniform spinning twisted Timoshenko beam using differential transform”, International Journal of Mechanical Sciences, vol. 48, no. 11, pp. 1323-1331, 2006. [SCI, EI]
  355. CW Chang-Lian and Cha`o-Kuang Chen, “Bifurcation and chaos of a flexible rotor supported by turbulent journal bearings with non-linear suspension”, Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, vol. 220, no. J6, pp. 549-561, 2006. [SCI, EI]
  356. JJ Hwang, SD Wu, LK Lai, Cha`o-Kuang Chen, et al., “Effect of breathing-hole size on the electrochemical species in a free-breathing cathode of a DMFC”, Journal of Power Sources, vol. 161, no. 1, pp. 240-249, 2006. [SCI, EI]
  357. Y.-F. Su and Cha`o-Kuang Chen, “Exergetic efficiency optimization of a refrigeration system with multi-irreversibilities”, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 220, no. 8, pp. 1179-1187, 2006. [SCI, EI]
  358. JK Kuo and Cha`o-Kuang Chen, “A novel Nylon-6-S316L fiber compound material for injection molded PEM fuel cell bipolar plates”, Journal of Power Sources, vol. 162, no. 1, pp. 207-214, 2006. [SCI, EI]
  359. Cha`o-Kuang Chen and SC Chang, “Modelling transport phenomena and epitaxial behaviours of cluster-surface collisions via molecular dynamics simulations”, Nanotechnology, vol. 17, no. 20, pp. 5051-5062, 2006. [SCI, EI]
  360. SW Lin, PP Wang, YT Fei, Cha`o-Kuang Chen, et al., “Simulation of the errors transfer in an articulation-type coordinate measuring machine”, International Journal of Advanced Manufacturing Technology, vol. 30, no. 9-10, pp. 879-886, 2006. [SCI, EI]
  361. Cha`o-Kuang Chen, TS Yen, YT Yang, “Lattice Boltzmann method simulation of backward-facing step flow with double plates aligned at angle to flow direction”, Journal of Heat Transfer-Transactions of the ASME, vol. 128, no. 11, pp. 1176-1184, 2006. [SCI, EI]
  362. Cha`o-Kuang Chen, LW Wu, and YT Yang, “Comparison of whole-domain and sequential algorithms for function specification method in the inverse heat transfer problem of laminar convective pipe flow”, Numerical Heat Transfer Part A-Applications, vol. 50, no. 10, pp. 927-947, 2006. [SCI, EI]
  363. JK Kuo and Cha`o-Kuang Chen, “Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle”, Journal of Power Sources, vol. 162, no. Sp. Iss. SI, pp. 1122-1129, 2006. [SCI, EI]
  364. Hai-Ping Hu and Cha`o-Kuang Chen, “Effects of eddy diffusivity in film condensation on a horizontal tube”, International Communications in Heat and Mass Transfer, vol. 34, no. 1, pp. 52-61, 2007. [SCI, EI]
  365. Cai-Wan Chang-Jian  and Cha`o-Kuang Chen, “ Chaos and bifurcation of a flexible rub-impact rotor supported by oil film bearings with nonlinear suspension”, Mechanism and Machine Theory, vol. 42, no. 3, pp. 312-333, 2007. [SCI, EI]
  366. Y.-F. Su and Cha`o-Kuang Chen, “Exergy destruction minimization of an irreversible Carnot refrigeration cycle”, Proceedings of The Institution of Mechanical Engineers Part A-Journal of Power and Energy, vol. 221, no. A1, pp. 11-20, 2007. [SCI, EI]
  367. Mu-Sheng Chiang, Hsin-Sen Chu, Cha`o-Kuang Chen, Sheng-Rui Jian, “Electrochemical reaction and performance of proton exchange membrane fuel cells with a novel cathode flow channel shape”, Journal of Power Sources, vol. 166, no. 2, pp. 362-375, 2007. [SCI, EI]
  368. Cai-Wan Chang-Jian  and Cha`o-Kuang Chen, “Bifurcation and chaos analysis of a flexible rotor supported by turbulent long journal bearings”, Chaos Solitons & Fractals, vol. 34, no. 4, pp. 1160-1179, 2007. [SCI, EI]
  369. Chin-Ru Su and Cha`o-Kuang Chen, “Geometry estimation of the furnace inner wall by an inverse approach”, International Journal of Heat And Mass Transfer, vol.: 50, no. 19-20, pp. 3767-3773, 2007. [SCI, EI]
  370. Cha`o-Kuang Chen and Ching-Chang Cho, “Electrokinetically-driven flow mixing in microchannels with wavy surface”, Journal of Colloid and Interface Science, vol. 312, no. 2, pp. 470-480, 2007. [SCI, EI]
  371. Cha`o-Kuang Chen, YC Hung, TL Liao, et al. , “Design of robust active queue management controllers for a class of TCP communication networks”,  Information Sciences, vol. 177, no. 19, pp. 4059-4071, 2007. [SCI, EI]
  372. Hai-Ping Hu and Cha`o-Kuang Chen, “ An analysis of turbulent film condensation on an inclined tube with variable wall temperature”, Journal of Physics D-Applied Physics, vol. 40, no. 16, pp. 4877-4881, 2007. [SCI, EI]
  373. BH Chen, Cha`o-Kuang Chen, and SC Chang, “ Thin film deposition on a corrugated surface: A molecular dynamics approach”, Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, vol. 260, no. 2, pp. 517-524, 2007. [SCI, EI]
  374. Y.-F. Su and Cha`o-Kuang Chen, “ Application of exergy method to a two-stage irreversible combined refrigeration system”, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 221, no. 7, pp. 807-813, 2007. [SCI, EI]
  375. Jenn-Kun Kuo and Cha`o-Kuang Chen, “The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation”, International Journal of Heat and Mass Transfer, vol. 50, no. 21-22, pp. 4166-4179, 2007. [SCI, EI]
  376. Cha`o-Kuang Chen, JJ Yan, and TL Liao, “ Sliding mode control for synchronization of Rossler systems with time delays and its application to secure communication”, Physica Scripta, vol. 76, no. 5, pp. 436-441, 2007. [SCI, EI]
  377. Cha`o-Kuang Chen, SC Chang, SY Sun, “ Lattice Boltzmann method simulation of channel flow with square pillars inside by the field synergy principle”, CMES-Computer Modeling in Engineering & Sciences, vol. 22, no. 3, pp. 203-215, 2007. [SCI, EI]
  378. CY Cheng, KY Tung, and Cha`o-Kuang Chen, “Transient laminar forced convection heat transfer of power-law fluids along a wavy plate”, Journal of the Chinese Society of Mechanical Engineers, vol. 28, no. 4, pp. 405-412, 2007. [SCI, EI]
  379. Cha`o-Kuang Chen, I-Jan Wang, and Ching-Yang Cheng, “Transient mixed convection heat and mass transfer with chemical reaction along a vertical wavy plate in a micropolar fluid”, Journal of the Chinese Society of Mechanical Engineers, vol. 28, no. 1, pp. 71-80, 2007. [SCI, EI]
  380. Journal of the Chinese Society of Mechanical Engineers28, no. 1, pp. 71-80
  381. C.-W. Chang-Jian  and Cha`o-Kuang Chen, “Chaos and bifurcation of a flexible rotor supported by porous squeeze couple stress fluid film journal bearings with non-linear suspension”, Chaos Solitons & Fractals, vol. 35, no. 2, pp. 358-375, 2008. [SCI, EI]
  382. Cha`o-Kuang Chen and C.-R. Su, “Inverse estimation for temperatures of outer surface and geometry of inner surface of furnace with two layer walls”, Energy Conversion and Management, vol. 49, no. 2, pp. 301-310, 2008. [SCI, EI]
  383. J.-K. Kuo, T.-H.Yen, and Cha`o-Kuang Chen, “Three-dimensional numerical analysis of PEM fuel cells with straight and wave-like gas flow fields channels”, Journal of Power Sources, vol. 177, no. 1, pp. 96-103, 2008. [SCI, EI]
  384. C.-W. Chang-Jian and Cha`o-Kuang Chen, “Bifurcation analysis of flexible rotor supported by couple-stress fluid film bearings with non-linear suspension systems”, Tribology International, vol. 41, no. 5, pp. 367-386, 2008. [SCI, EI]
  385. J.-Y. Chiang and Cha`o-Kuang Chen, “Application of grey prediction to inverse nonlinear heat conduction problem”, International Journal of Heat and Mass Transfer, vol. 51, no. 3-4, pp. 576-585, 2008. [SCI, EI]
  386. Huei Chu Weng and Cha`o-Kuang Chen, “Fully developed thermocreep-driven gas microflow”, Applied Physics Letters, vol. 92, no. 9, 094105, 2008. [SCI, EI]
  387. C.-I. Chen, Cha`o-Kuang Chen, and H.-J. Lin, “Analysis of unsteady flow through a microtube with wall slip and given inlet volume flow rate variations”, Journal of Applied Mechanics-Transactions of the ASME, vol. 75, no. 1, 014506, 2008. [SCI, EI]
  388. Cha`o-Kuang Chen,  L.-W. Wu, and Yue-Tzu Yang, “Proposed modification to whole domain function specification method to improve accuracy of its estimations”, Journal of Heat Transfer-Transactions of the ASME, vol. 130, no. 5, 051702, 2008. [SCI, EI]
  389. C.-W. Chang-Jian and Cha`o-Kuang Chen, “Chaos and bifurcation of a rub-impact rigid rotor supported by oil film bearings”, Journal of The Chinese Society of Mechanical Engineers, vol. 29, no. 1, pp. 13-19, 2008. [SCI, EI]
  390. Huei Chu Weng and Cha`o-Kuang Chen, “On the importance of thermal creep in natural convective gas microflow with wall heat fluxes”, Journal of Physics D-Applied Physics, vol. 41, no. 11, 115501, 2008. [SCI, EI]
  391. C.-W. Chang-Jian and Cha`o-Kuang Chen, “Non-linear dynamic analysis of bearing-rotor system lubricating with couple stress fluid”, Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, vol. 222, no. 4, pp. 599-616, 2008. [SCI, EI]
  392. Huei Chu Weng and Cha`o-Kuang Chen, “Variable physical properties in natural convective gas microflow”, Journal of Heat Transfer-Transactions of the ASME, vol. 130, no. 8, 082401, 2008. [SCI, EI]
  393. C.-W. Chang-Jian and Cha`o-Kuang Chen, “Non-linear dynamic analysis of rub-impact rotor supported by turbulent journal bearings with non-linear suspension”, International Journal of Mechanical Sciences, vol. 50, no. 6, pp. 1090-1113, 2008. [SCI, EI]
  394. Hai-Ping Hu and Cha`o-Kuang Chen, “A theoretical study of free convection in turbulent film boiling on a horizontal elliptical tube”, Heat and Mass Transfer, vol. 44, no. 10, pp. 1171-1178, 2008. [SCI, EI]
  395. Cha`o-Kuang Chen and Ching-Chang Cho, “A combined active/passive scheme for enhancing the mixing efficiency of microfluidic devices”, Chemical Engineering Science, vol. 63, no. 12, pp. 3081-3087, 2008. [SCI, EI]
  396. Y.-F. Su and Cha`o-Kuang Chen, “Analysis and optimisation of an irreversible Brayton refrigeration cycle using exergy concept”, International Journal of Exergy, vol. 5, no. 4, pp. 470-486, 2008. [SCI, EI]
  397. Hai-Ping Hu, Chi-Chang Wang, and Cha`o-Kuang Chen, “Turbulent film boiling on a horizontal tube with variable wall temperature”, International Communications in Heat and Mass Transfer, vol. 35, no. 8, pp. 974-979, 2008. [SCI, EI]
  398. J.-J. Hwang, W.-R. Chang, F.-B., Weng A. Su, and Cha`o-Kuang Chen, “Development of a small vehicular PEM fuel cell system”, International Journal of Hydrogen Energy, vol. 33, no. 14, pp. 3801-3807, 2008. [SCI, EI]
  399. Yue-Tzu Yang, Shih-Kai Chien, and Cha`o-Kuang Chen, “A double decomposition method for solving the periodic base temperature in convective longitudinal fins”, Energy Conversion and Management, vol. 49, no. 10, pp. 2910-2916, 2008. [SCI, EI]
  400. Jenn-Kun Kuo, Tzu-Shuang Yen, and Cha`o-Kuang Chen, “Improvement of performance of gas flow channel in PEM fuel cells”, Energy Conversion and Management, vol. 49, no. 10, pp. 2776-2787, 2008. [SCI, EI]
  401. Jung-Chang Hsu, Hsin-Yi Lai, and Cha`o-Kuang Chen, “Free vibration of non-uniform Euler-Bernoulli beams with general elastically end constraints using Adomian modified decomposition method”, Journal of Sound And Vibration, vol. 318, no. 4-5 , pp. 965-981, 2008. [SCI, EI]
  402. Bin-Hao Chen, Shing Cheng Chang, Ming-Shan Jeng, and Cha`o-Kuang Chen, “Thermal-loading-induced tunable flattening dynamics of flexible single-walled carbon nanotubes”, Journal of Physics-Condensed Matter, vol. 20, no. 44, 445223, 2008. [SCI, EI]
  403. Hai-Ping Hu, Chi-Chang Wang, and Cha`o-Kuang Chen, “Surface tension effects in turbulent film boiling on a horizontal elliptical tube”, Journal of Thermophysics and Heat Transfer, vol. 22, no. 4, pp. 598-603, 2008. [SCI, EI]
  404. Cha`o-Kuang Chen and Ching-Chang Cho, “Electrokinetically driven flow mixing utilizing chaotic electric fields”, Microfluidics And Nanofluidics, vol. 5, no. 6, pp. 785-793, 2008. [SCI, EI]
  405. Huei Chu Weng and Cha`o-Kuang Chen, “A challenge in Navier-Stokes-based continuum modeling: Maxwell-Burnett slip law”, Physics of Fluids, vol. 20, no. 10, 106101, 2008. [SCI, EI]
  406. Huei Chu Weng, Cha`o-Kuang Chen, and Chieh-Li Chen, “Non-Newtonian flow of dilute ferrofluids in a uniform magnetic field,” Physical Review E, vol. 78,  056305, 2008. [SCI, EI]
  407. Huei Chu Weng and Cha`o-Kuang Chen, "Comment on “Measuring the transverse magnetization of rotating ferrofluids”", Physical Review E, vol. 78, 068301, 2008 [SCI, EI]
  408. Jenn-Kun Kuo, Cai-Wan Chang-Jian, and Cha`o-Kuang Chen, “Numerical Investigation of the Performance and Transport Phenomena of a Proton-Exchange Membrane Fuel Cell with a Wavelike Gas Flow Channel Design,” Journal of Applied Polymer Science, vol. 111, no. 3, pp. 1440-1448, 2009. [SCI, EI]
  409. Cai-Wan Chang-Jian, Cha’o-Kuang Chen, "Chaotic response and bifurcation analysis of a flexible rotor supported by porous and non-porous bearings with nonlinear suspension", Nonlinear Analysis: Real World Applications, Volume 10, Issue 2, April 2009, Pages 1114-1138 [SCI, EI]
  410. Shih-Shin Chen, Cha’o-Kuang Chen, "Application of the differential transformation method to the free vibrations of strongly non-linear oscillators", Nonlinear Analysis: Real World Applications,Volume 10, Issue 2, April 2009, Pages 881-888 [SCI, EI]
  411. Weng, Huei Chu, Chen, Cha'o-Kuang, "Drag reduction and heat transfer enhancement over a heated wall of a vertical annular microchannel ", INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Volume 52, Issue 3-4,Pages 1075-1079, Jan 2009 [SCI, EI]
  412. Chen, Cha'o-Kuang, Lin, Yan-Ting, "Laminar film condensation from a downward-flowing steam-air mixture onto a horizontal circular tube", APPLIED MATHEMATICAL MODELLING, Volume 33, Issue 4, Pages 1944-1956, Apr 2009 {SCI, EI]
  413. Chang-Jian, Cai-Wan, Chen, Cha'o-Kuang, "Chaos of rub-impact rotor supported by bearings with nonlinear suspension", TRIBOLOGY INTERNATIONAL, Volume 42, Issue 3, Pages 426-439, Mar 2009
  414. Y.T. Yang*, C.K. Chen, S.C. Chang, S.Y. Sun, "LBM simulation of channle flow with a cylinder by the field synergy principle", Progress in Computational Fluid Dynamics, Vol. 9, Nos. 3/4/5, P. 254-261, 2009
  415. Cha'o-Kunag Chen, H.Y. Lai, Chin-Chia Liu, "Application of hybrid differential transformation/ finite difference method to nonlinear analysis of nonlinear analysis of micro fixed-fixed beam", Microsystem Technologies, Apr. 2009
  416. Cha'o-Kuang Chen, Yan-Ting Lin,  "Forced-convection film condensation on a horizontal cylinder with wavy surface structure", HEAT AND MASS TRANSFER, Vol 45, Issue 6, Pages 775-782, APR 2009  
  417. Cai-Wan Chang-Jian, Cha`o-Kuang Chen, "Nonlinear analysis of a rub-impact rotor supported by turbulent couple stress fluid film journal bearings under quadratic damping", Nonlinear Dynamics (2009) 54: 297-314
  418. Cheng-Chi Chang, Yue-Tzu Yang, Tzu-Hsiang Yen, Cha'o-Kuang Chen*, "Numerical investigation into thermal mixing efficiency in Y-shaped channel using Lattice Boltxmann method and field synergy principle", International Journal of Thermal Sciences, March 2009.
  419. Yen, Tzu-Hsiang; Vrabec, Jadran; Hasse, Hans.,“A Molecular Dynamics Study on Rotational Motion of a Fluid in a Cylindrical Cavity”, Journal of the Chinese Society of Mechanical Engineers, vol. 33, pp. 75-81, 2012.
  420. Tien, Wei-Chung; Yang, Yue-Tzu; Chen, Cha'o-Kuang., “Application of Homotopy Analysis Method for Periodic Heat Transfer in Convective Straight Fins with Temperature-Dependent Thermal Conductivity”, Cmes-Computer Modeling in Engineering & Sciences, vol. 84, pp. 155-169, 2012.
  421. Tang, Hsiang-Wen; Yang, Yue-Tzu; Chen, Cha-Kuang., “Application of new double side approach method to the solution of super-elliptical plate problems”, Acta Mechanica, vol. 223, pp. 745-753, 2012.
  422. Cho, Ching-Chang; Chen, Chieh-Li; Chen, Cha'o-Kuang., “Electrokinetically-driven non-Newtonian fluid flow in rough microchannel with complex-wavy surface”, Journal of Non-Newtonian Fluid Mechanics, vol. 173, pp. 13-20, 2012.
  423. Lin, M. C.; Chen, C. K. ., “Finite amplitude long-wave instability of a thin viscoelastic fluid during spin coating”, Applied Mathematical Modelling, vol. 36, pp. 2536-2549, 2012.
  424. Chen, Cheng-Kuang; Lai, Yueh-Chun; Yang, Yu-Hang., “Inducing transparency with large magnetic response and group indices by hybrid dielectric metamaterials”, Optics Express, vol. 20, pp. 6952-6960, 2012.
  425. Chien, Shih-Kai; Yang, Yue-Tzu; Chen, Cha'o-Kuang., “Influence of chemisorption on the thermal conductivity of graphene nanoribbons”, Carbon, vol. 50, pp. 421-428, 2012.
  426. Cho, Ching-Chang; Chen, Chieh-Li; Chen, Cha'o-Kuang., “Mixing enhancement in crisscross micromixer using aperiodic electrokinetic perturbing flows”, International Journal of Heat and Mass Transfer, vol. 55, pp. 2926-2933, 2012.
  427. Cho, Ching-Chang; Chen, Chieh-Li; Chen, Cha'o-Kuang., “Mixing enhancement of electrokinetically-driven non-Newtonian fluids in microchannel with patterned blocks”, Chemical Engineering Journal, vol. 191, pp. 132-140, 1012.
  428. Cho, Ching-Chang; Chen, Chieh-Li; Chen, Cha'o-Kuang., “Mixing of non-Newtonian fluids in wavy serpentine microchannel using electrokinetically driven flow”, Electrophoresis, vol. 33, pp. 743-750, 2012.
  429. Liu, C. -C.; Yang, S. -C.; Chen, C. -K., “NONLINEAR DYNAMIC ANALYSIS OF MICRO CANTILEVER BEAM UNDER ELECTROSTATIC LOADING”, Journal of Mechanics, vol. 28, pp. 63-70, 2012.
  430. Tsai, PY; Chen, CK., “A NEW ALGORITHM ON THE SOLUTIONS OF FORCED CONVECTIVE HEAT TRANSFER IN A SEMI-INFINITE FLAT PLATE”, Journal of Mechanics, vol. 27, pp. 63-69, 2011.
  431. Cho, Ching-Chang; Chen, Chieh-Li; Tsai, Rei-Tang., “A novel microfluidic mixer using aperiodic perturbation flows”, Chemical Engineering Science, vol. 66, pp. 6159-6167, 2011.
  432. Yau, HT; Wang, CC; Cho, CC., “A NUMERICAL INVESTIGATION INTO ELECTROOSMOTIC FLOW IN MICROCHANNELS WITH COMPLEX WAVY SURFACES”, Thermal Science, vol. 15, pp. S87-S94, 2011.
  433. Chen, Chieh-Li; Chen, Cha'o-Kuang; Chang, Shing-Cheng., “Atomic Velocity Distributions and Diffusing Behaviors in a Nano-Alloy Cluster”, Journal of Cluster Science, vol. 22, pp. 537-544, 2011.
  434. Chen, Cha'o-Kuang; Yang, Yue-Tzu; Chang, Kuei-Hao., “Entropy generation of radiation effect on laminar-mixed convection along a wavy surface”, Heat and Mass Transfer, vol. 47, pp. 385-395, 2011.
  435. Chen, Chao-Kuang; Yang, Yue-Tzu; Chang, Kuei-Hao., “Forced Convection Along the Wavy Surface”, Journal of Heat Transfer-Transactions of the Asme, vol. 133, 2011.
  436. Tsai, PY; Chen, CK., “Free vibration of the nonlinear pendulum using hybrid Laplace Adomian decomposition method”, International Journal For Numerical Methods in Biomedical Engineering, vol. 27, pp. 262-272, 2011.
  437. Yan, Hong-Sen; Chen, Chao-Kuang; Juang, Jer-Nan.,“In Celebration of Prof. Han-Min Hsia's 80th Birthday”, Journal of the Chinese Society of Mechanical Engineers, vol. 32, pp.463-463, 2011.
  438. Chien, SK; Yang, YT; Chen, CK.,“Influence of hydrogen functionalization on thermal conductivity of graphene: Nonequilibrium molecular dynamics simulations”, Applied Physics Letters, vol. 98, 2011.
  439. Chen, CK; Lai, HY; Liu, CC.,“Numerical analysis of entropy generation in mixed convection flow with viscous dissipation effects in vertical channel”, International Communications in Heat and Mass Transfer, vol. 38, pp. 285-290, 2011.
  440. Tien, Wei-Chung; Yang, Yue-Tzu; Yen, Tzu-Hsiang.,“Numerical Investigation Into Gas Flow in Bipolar Plate Channel of PEMFC Utilizing Lattice Boltzmann Method and Field Synergy Principle”, Journal of the Chinese Society of Mechanical Engineers, vol. 32, pp. 549-558, 2011.
  441. Chen, CK; Lin, MC; Chen, CI.,“STABILITY ANALYSIS OF A THIN MICROPOLAR FLUID FLOWING ON A ROTATING CIRCULAR DISK”, Journal of Mechanics, vol. 27, pp. 95-105, 2011.
  442. Chen, Cha'o-Kuang; Yang, Yue-Tzu; Chang, Kuei-Hao.,“The Effect of Thermal Radiation on Entropy Generation Due to Micro-Polar Fluid Flow Along a Wavy Surface”, Entropy, vol. 13, pp. 1595-1610, 2011.
  443. Chien, Shih-Kai; Yang, Yue-Tzu; Chen, Cha'o-Kuang.,“The effects of vacancy defects and nitrogen doping on the thermal conductivity of armchair (10,10) single-wall carbon nanotubes”, Solid State Communications, vol. 151, pp. 1004-1008, 2011.
  444. Yang, Yue-Tzu; Tsai, Kuo-Teng; Chen, Cha'o-Kuang.,“The performance experiments of the wavelet channel in a PEM fuel cell”, Journal of the Chinese Society of Mechanical Engineers, vol. 32, pp. 139-145, 2011.
  445. YANG, YT; CHANG, CC; CHEN, CK.,“A Double Decomposition Method for Solving the Annular Hyperbolic Profile Fins With Variable Thermal Conductivity”, Heat Transfer Engineering, vol. 31, pp. 1165-1172, 2010.
  446. Tsai, PY; Chen, CK., “An approximate analytic solution of the nonlinear Riccati differential equation”, Journal of the Franklin Institute-Engineering and Applied Mathematics, vol. 347, pp. 1850-1862, 2010.
  447. CHEN, CK; CHANG, SC., “An investigation of the internal temperature dependence of Pd-Pt cluster beam deposition: A molecular dynamics study”, APPLIED SURFACE SCIENCE, vol. 256, pp. 2890-2897, 2010.
  448. LIN, SY; CHEN, CK., “Construction of a dynamic cutting force model for oblique cutting”, Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 224, pp. 361-372, 2010.
  449. CHANG-JIAN, CW; CHEN, CK., “Couple stress fluid improve rub-impact rotor-bearing system - Nonlinear dynamic analysis”, APPLIED MATHEMATICAL MODELLING, vol. 34, pp. 1763-1778, 2010.
  450. Cho, CC; Ho, CJ; Chen, CK., “Enhanced micromixing of electroosmotic flows using aperiodic time-varying zeta potentials”, Chemical Engineering Journal, vol. 163, pp. 180-187, 2010.
  451. Chen, CK; Yang, YT; Chang, KH., “Entropy generation of laminar-forced convection along the wavy surface”, International Journal of Exergy, vol. 7, pp. 564-578, 2010.
  452. SOONG, CY; CHEN, CK., “In Memory of Professor Guang-Jyh Hwang”, Journal of the Chinese Society of Mechanical Engineers, vol. 31, pp. 165-165, 2010.
  453. CHEN, CK; CHANG, SC; CHEN, CL., “Molecular dynamics simulations of the internal temperature dependent diffusing and epitaxial behaviors of Pd-Ag cluster beam deposition”, Journal of Applied Physics, vol. 107, 2010.
  454. LI, YH; LI, YZ; CHEN, CL., “New Interpretation to Variational Iteration Method: Convolution Iteration Method Based on Duhamel's Principle for Dynamic System Analysis”,mes-Computer Modeling in Engineering & Sciences, vol. 58, pp. 1-13, 2010.
  455. Chien, SK; Yang, YT; Chen, CK., “Thermal conductivity and thermal rectification in carbon nanotubes with geometric variations of doped nitrogen Non-equilibrium molecular dynamics simulations”, Physics Letters a, Vol. 374, PP. 4885-4889, 2010.
  456. HU, HP; WANG, CC; CHEN, CK., “TURBULENT FILM BOILING ON A NON-ISOTHERMAL HORIZONTAL ELLIPTICAL TUBE WITH STEAM HEATING SURFACE”, Journal of Mechanics, Vol. 26, PP. 287-292, 2010.
  457. Chen, CK; Lai, HY; Chen, WF., “Unsteady Unidirectional Flow of Second-Grade Fluid through a Microtube with Wall Slip and Different Given Volume Flow Rate”, Mathematical Problems in Engineering, 2010.
  458. Chen, CK; Lai, DY., “Weakly Nonlinear Stability Analysis of a Thin Magnetic Fluid during Spin Coating”, Mathematical Problems in Engineering, 2010.

 

二、研討會論文

  1. 陳朝光, “汽泡成長之理論分析”, 中國機械工程學會,民國六十年年會論文第一名, 1971.
  2. 曲新生, 陳朝光,馬克斯威爾黏彈性流體非穩定性層流分析,中華民國第二屆全國力學會議,1978。台灣,台南.
  3. 林國基, 陳朝光, 翁政義, “Sliding Beraing with a Convex Pad Surface for Micropolar Fluids” ,中華民國第二屆全國力學會議,1978。台灣, 台南.
  4. 張益敏, 陳朝光, 翁政義, “Application of the Variational Embedding Method to the Nonlinear Transient Heat Conduction”, 中華民國第五屆全國力學會議,1981。台灣, 中壢.
  5. 曲新生, 翁政義, 陳朝光, “Stability of condensation Flow Down a vertial Cylinder with Heat Generation”, 中華民國第五屆全國力學會議,1981。台灣,中壢.
  6. Hsin Sen Chu, Cheng I. Weng, Cha`o-Kuang Chen, “ Transient response of two-dimensional straight fins”, Sym. on Transport Phenomena and Applications, R.O.C., pp. 74-84, 1982.
  7. Hsin Sen Chu, Cheng I. Weng, Cha`o-Kuang Chen,“Transient response of annular fins by optimal linearization and fourier series teachnique”, Proc. of Inter ASME Conf., Modeling and Simulation, France, vol.8, pp. 57-62, 1982.
  8. Ming-Jer Huang and Cha`o-Kuang Chen, “Finite Difference Solution for Laminar Free Convection over a Vertical Plate with Blowing and Vertical Plate with Blowing and Varying Wall Temperature ”, Sym. on Transport Phenomena and Applications, R.O.C. p 55-68, 1982.
  9. Cha`o-Kuang Chen, Han-Taw Chen and John W. Cleaver, “Laminar film condensation on a downward vertical fin“, Proceedings of Condensed Papers - 3rd Multi-Phase Flow and Heat Transfer Symposium-Workshop, Miami Beach, FL, USA, pp. 130-131, 1983. [EI]
  10. Cha`o-Kuang Chen and Yih-Min Chang, “Variational embedding solutions for planar solidification of a saturated liquid with radiation and convection at the thick wall“, Proceedings of Condensed Papers - 3rd Multi-Phase Flow and Heat Transfer Symposium-Workshop., Miami Beach, FL, USA, pp. 103-105, 1983. [EI]
  11. Cha`o-Kuang Chen, Yih-Min Chang, Shyne-Shian Chang and Kuei Lin, “Variational embedding technique on inward cylindrical solidification with convective and radiative boundary conditions“, Organized by Korean Inst of Chemical Engineers, Proceedings - 3rd Pacific Chemical Engineering Congress, vol. 2, pp. 37-41, 1983. [EI]
  12. Chih-Yang Wu, Cha'o Kuang Chen and Fue-Sang Lien, “Effects of free convection and mass transfer on the stokes' second problem for an infinite vertical plate “, Proceedings of Condensed Papers - 3rd Multi-Phase Flow and Heat Transfer Symposium-Workshop., Miami Beach, FL, USA, pp. 96, 1983. [EI]
  13. H. C. Lin, Cha`o-Kuang Chen, “ Analysis of the Oil Damper with Maxwell‘s Fluid ” , Proc. of 7th Conf. on Theo. & Appl. Mechanics, R.O.C., pp. 247-257, 1983.
  14. Ming-Jer Huang and Cha`o-Kuang Chen, “Laminar free convection over a horizontal circular cylinder with blowing and suction”, Chung-kuo Kung Ch'eng Hsueh K'an/Journal of the Chinese Institute of Engineers, vol.6, no. 4, pp. 209-217, 1983. [EI]
  15. Ming-Jer Huang, Cha`o-Kuang Chen and John W. Cleaver, “Laminar free convection over a horizontal nonisothermal cylinder with blowing and suction”, Proceedings of Condensed Papers - 3rd Multi-Phase Flow and Heat Transfer Symposium-Workshop., Miami Beach, FL, USA, pp. 449-450, 1983. [EI
  16. Ming-Jer Huang and Cha`o-Kuang Chen, “Effect of surface mass transfer on free convection flow over a vertical cylinder in a saturated porous medium ”, Proc. of 7th Conf. on Theo. & Appl. Mechanics, R.O.C., pp. 247-257, 1983.
  17. Fue-Sang Lien and Cha`o-Kuang Chen, “Forced Convection over Rotating Bodies with Blowing and Suction”, Proc. of 7th Conf. on Theo. & Appl. Mechanics, R.O.C., pp. 291-300, 1983.
  18. Ming-Jer Huang and Cha`o-Kuang Chen, “Effects of Blowing and Suction on Laminar Free Convection from Sphere ”, Sym. on Transport Phenomena and Applications, R.O.C., pp. 123-129, 1983.
  19. Fue-Sang Lien, C. Y. Wu and Cha`o-Kuang Chen, “Effects of Convection Heat Mass Transfer on the Flow about on Oscillating Verical Plate under Magnetic Field”, Symp. on Transport Phenomena and Applications, R.O.C., p130-135, 1983.
  20. H. S. Chu, Cha`o-Kuang Chen and Cheng-I Weng, “Randon Heat Transfer in Flate Channels under Magnetic Effect with Timewise Variation of Ambient Temperature”, Proc. of ASME-JSME Thermal Engineering Joint Conf. U.S.A., pp. 189-192, 1983.
  21. Ming-Jer Huang and Cha`o-Kuang Chen, “Laminar Free Convection for Nonisothermal Vertical Plate with Blowing or Suction ”, Proc. of ASME-JSME Thermal Engineering Joint Conf. U.S.A., pp. 263-267, 1983.
  22. Cha`o-Kuang Chen, Han-Taw Chen and John W. Cleaver, “Laminar film condensation on downward vertical fin”, Multi-Phase Flow and Heat Transfer 3, Proceedings of the 3rd Symposium-Workshop. Part A: Fundamentals, Miami Beach, FL, USA, pp. 787-792, 1984. [EI]
  23. H. T. Chen and Cha`o-Kuang Chen, “Laminar Film Condensation of Triangular Fin Subject to Saturated Vapor ”, Symp. on Transport Phenomena an Applications, R.O.C. , pp. 123-127,1984.
  24. Chen-I Hung, H. C. Lin and Cha`o-Kuang Chen, “Analysis on Film Cooling of Two-dimensional Horizontal Flat Plate”, First National Conf. on Mech.Eng. CSME, pp. 7-14, 1984.
  25. Cha`o-Kuang Chen, H. T. Chen and John W. Cleaver, “ Laminar Film Condensation on Downward Vertical Fin ”, Proc. of 7th Internation Conf. on Multi-phase Flow and Heat Transfer, U.S.A., pp. 787-792, 1984
  26. C. Y. Hu, Cheng-I Weng, Cha`o-Kuang Chen,“ A Modified Model of Machining Chatter”, 3rd International Modal Analysis Conference U.S.A., pp. 1178-1184, 1984.
  27. Fue-Sang Lien, Cha`o-Kuang Chen and John W. Cleaver, “ Vertical Plate Fin with Conjugated Forced Convection-Conduction Turbulent Flow”, ASME, 1984 Winter Meeting, U.S.A., 84-WA/HT-8.
  28. Fue-Sang Lien, Ming-Jer Huang, Cha`o-Kuang Chen, “ Radiative Effect and Viscousity Variation on Conjugated Nature Convection-Conduction Analysis of Heat Transfer in a Vertical Pin ”, 4th Int. Conf. on Appl. Num. Modeling, R.O.C., pp. 612-618, 1984.
  29. Nature Convection-Conduction Analysis of Heat Transfer in a Vertical Pin ”, 4th Int. Conf. on Appl. Num. Modeling, R.O.C., pp. 612-618, 1984.
  30. 楊俞青、王廷山、陳朝光,“Thermoelastic Transient Response of An Infinitely Long Annular Cylinder”,中國機械工程學會第一屆全國學術研討會,1984,中壢,台灣,p 119-126.
  31. 黃智顯、黃明哲、周有禮、陳朝光,垂直平板於非牛頓流體中之自然對流分析,中國機械工程學會第二屆全國學術研討會, 1985, 高雄,台灣, pp. 73~78.
  32. 邵揮洲, 陳朝光, 有限外壁內向凝固問題之三次樣線數值方法解析,中國機械工程學會第二屆全國學術研討會,1985 ,高雄,台灣, pp. 181~188.鄭璧瑩, 翁政義, 陳朝光, 工業用機械手之工作空間分析,中國機械工程學會第二屆全國學術研討會,1985,高雄,台灣, pp. 421~428.
  33. Cha`o-Kuang Chen, H. T. Chen, J. Barrow, and John W. Cleaver, “Study on Laminar Film Condensation Heat Transfer onto Fin Subjection to Superheated Vaper”, Proc. of ASME-JSME Thermal Engineering Joint Conf. U.S.A., pp. 285-288, 1985.
  34. Cha`o-Kuang Chen and Fue-Sang Lien, “Vertical Circular Pin with Conjugated Forced Convection-Conduction Turbulent Flow”, 4th International Conference on Numerical Method in Thermal Problem, July 15-18, Swansea, U. K. 1985.
  35. Fue-Sang Lien, Cha‘o-Kuang Chen, “Radiafine effect on the nertical plate Fin in Conjugated Natural Convection-Conduction Flow ” , Modelling, Simulation & Control AMSE vol.5, no.2, pp. 15-31, 1985.
  36. Cha`o-Kuang Chen and Chen-I Hung, “ Transient Magnetohydrodynamic Free Convection with Mass Transfer on An Isothermal Vetrical Plate” , 中華民國第九屆全國力學會議, 1985。台灣, 台北.
  37. Tsan-Hui Hsu, Cha`o-Kuang Chen, “Vertical Plate Fin with Conjugated Natural Convection-Conduction Flow of Micropolar” , 中華民國第九屆全國力學會議,1985。台灣, 台北.
  38. Kai-Lung Lin , Cha`o-Kuang Chen , “ Numercial Analysis of Transient Free Convection in Non-Newtonian Fluids” , 中華民國第九屆全國力學會議,1985。台灣,台北.
  39. Cha`o-Kuang Chen, Han-Taw Chen,“The Effect of Wall Interaction on Freezing Materials”, Proceedings of the 5th International Offshore Mechanics and Arctic Engineering, Symposium, Tokyo, Japan,p 254-259,1986.
  40. King-Leung Wong, Cha`o-Kuang Chen, “Finite Element Solutions for the Charactenstic of Laminar Flow and Combined Convection Around a Horizontal Square Prism”, Heat Transfer in Thermal Systems, Seminar Phase II, NCKU, Tainan, 1986.
  41. Cha`o-Kuang Chen,“ Application of Cubic Spline Collocation method to solve Transient Heat Transfer Problems”, Heat Transfer in Thermal Systems, Seminar Phase II, NCKU, Tainan, 1986.
  42. Ming-Jer Huang, Cha`o-Kuang Chen, “Mixed Convection Flow Over a Vertical Plate in Non-Newtonion Power Law Fluids”, 86-HT-17 p 1-6, AIAA/ASME Transfer Conference, Boston, U.S.A. 1986.
  43. 邵揮洲,陳朝光, 部分分隔密封方形容器內流體之自然對流熱傳數值解析, 中國機械工程學會第三屆全國學術研討會, 1986, 中壢, 台灣, pp. 257-266.
  44. 鄭璧瑩, 翁政義, 陳朝光, 座標轉換的符號表示法在機械手方面的應用, 中國機械工程學會第三屆全國學術研討會,1986, 中壢, 台灣, pp. 543-554.
  45. 張振龍、黃宏燦、翁政義、陳朝光,多面鑽切削性能之理論分析與實驗,中國機械工程學會第三屆全國學術研討會, 1986,中壢,台灣,p 1011-1022.
  46. 陳響亮, 吳聖儒, 陳朝光, 應用SADI方法解暫態的混合對流問題, 中國機械工程學會第四屆全國學術研討會, 1987, 新竹, 台灣, pp. 333-342.
  47. 鄭璧瑩, 翁政義, 陳朝光, “電腦輔助自動推導機械手動力學方程式及其應用”, 中國機械工程學會第四屆全國學術研討會,1987, 新竹, 台灣, pp. 1393-1402.
  48. 邵揮洲, 陳朝光, “發熱體於水平渠道中之混合對流熱傳研究”, 中國機械工程學會,1987, 第四屆學術研討會.
  49. 邵揮洲, 陳朝光, “具可傳導水平隔板之側向加熱密封容器內之自然熱對流熱傳現象”, 中華民國第十一屆全國力學會議.1987.
  50. Heiu-Jou Shaw and Cha`o-Kuang Chen, “ Natural convection heat transfer through horizontal channel connecting two fluid enclosures at different temperature”, International symposium on natural convection, ASME Winter Annual meeting, Boston, Massachusetts,Dec.13-18. p 385-390, 1987.
  51. Heiu-Jou Shaw and Cha`o-Kuang Chen, “Mixed convection heat transfer in horizontal cavities heated from bottom surface”, The UK national committee for heat transfer, Galsgow, 14-16th Sep. 1988.
  52. Heiu-Jou Shaw and Cha`o-Kuang Chen, “Mixed convection heat transfer in vertical cavities heated from bottom surface”, Heat transfer in vertical microelectronic equipment, Dubrovik, Yugoslavia, 29th Aug. ,1988
  53. C. Y. Wu, S. C. Wu and Cha`o-Kuang Chen, “Heat transfer in anisotropically scattering boundary-layer flows: Modified differential approximation solutions”, The Third Int. symp. on Transport phenomena in Thermal Control, pp. 761-774, Aug. 1988, Taipei, Taiwan.
  54. Fue-Sang Lien and Cha`o-Kuang Chen and J. W. Cleaver, “Mixed Convection over Rotating Bodies with Blowing and Suction”, 4th Int, Conf. on Numerical Method in Thermal Problems, July 15-18. 1988, Swansea, U. K.
  55. 邵揮洲, 陳文立, 陳朝光, 三維水平渠道中具有單一熱源時之層流混合對流熱傳之研究,中國機械工程學會,1988, 第五屆學術研討會, 台北市.
  56. 陳朝光, 流子控制原理, 自動化應用技術講習會,國科會工程科技推展中心,1988, 高雄市p 149-178.
  57. 邵揮洲, 陳文立, 陳朝光, 密閉容器內平行兩垂直平板內側受熱引起自然對流現象之研究, 中國機械工程學會第五屆全國學術研討會, 1988,台北,台灣,pp. 503-514.
  58. 鄭璧瑩, 翁政義, 陳朝光, 披爾格蘭符號表示法在機械手速率控制方面的應用, 中國機械工程學會第五屆全國學術研討會, 1988, 台北, 台灣,pp. 859-870.
  59. 洪振益, 彭永嚴、, 陳朝光, 非牛頓流體在多孔壁管道入口區之流動問題研究, 中國機械工程學會第六屆全國學術研討會, 1989, 台南, 台灣, pp. 139-148.
  60. 邵揮洲, 陳文立, 陳朝光, 三維水平渠道中具有單一熱源時之層流混合對流熱傳之研究,中國機械工程學會,1989, 第六屆學術研討會, 台南市.。
  61. Ming-I. Char, Cha`o-Kuang Chen, “Conjugate Mixed Convection Heat Transfer from An Inclined, Continuous, Moving Surface” , 中華民國第十三屆全國力學會議, 1989。台灣,台中.
  62. 蘇親儒, 陳朝光, 機件配合與公差選用之知識庫系統研究, 中國機械工程學會第七屆全國學術研討會, 1990, 新竹, 台灣,p 1477-1484.
  63. P. Cheng, Shih-Wen Hsiao, and Cha‘o-Kuang Chen,“Natural convection in Confined porous media with nonuniform porosity and thermal dispersion effects”, Proceedings of the NATO Advanced Study Institute on Convective Heat and Mass Transfer, pp. 387-404, 1990, U.S.A.
  64. Cha`o-Kuang Chen and Tsan-Hui Hsu, “National convection of micropolar fluids in an enclosed cavity”, ASME/JSME, Thermal Engineering proceeding. Vol 1, pp. 199-205, 1991.
  65. 張文敏, 林慧娟, 陳朝光, 以非達西理論且考慮封閉矩形壁厚熱傳導之多孔性介質的自然對流分析,中華民國第十五屆全國力學會議, 1991, 台灣, 台南.
  66. Cheg-Ren Lin, “ Hydromagnetic Flow of Incompressible Second Order Fluids Over A stretching Permeable Surface” ,中華民國第十五屆全國力學會議, 1991。台灣,台南.
  67. Cha`o-Kuang Chen and C. H. Chen, “A numerical study of non-Darcian effects on natural convection flow over a vertical cylinder in a saturated porous medium”, Numerical methods in thermal problems proceeding of the eight international conference, held in Seansea Wales on July, 12-16th, 1993.
  68. Cha`o-Kuang Chen and T. M. Wu,“Application of symbolic representation method to the analysis of machine errors” ,Second international symposium on measurement technology and intelligent instruments, vol. 2101, pp. 155-172, Wuhan, China, 1993.
  69. 陳朝光, 林志哲, 陳介力, 傳算器架構平行處理系統在具贅餘自由度機械臂控制上之應用, The 2nd Natl. Conf. on FAZZY Theory and application, pp. 435-440, 1994. Taipei, R.O.C.
  70. 王俊志, 劉朝光, 楊德宗, 陳朝光, 銑削加工表面誤差之解析模式, 中國機械工程學會第十一屆全國學術研討會, 1994, 台中,台灣, pp. 525-534.
  71. Cha`o-Kuang Chen and H. C. Kuo, “The uncertainties of using a circular testdervice for CNC machine tools”, 精密計量研討會,中國哈爾濱,哈爾濱工業大學, 1995年8月15-19日.
  72. 楊慶煜,陳朝光, “An Iterative Measuring Method to Identify an Unknown Geometric Profile”, 中國機械工程學會第十二屆學術研討會,1995, 嘉義中正大學.
  73. Cha`o-Kuang Chen and P. F. Lin , “Simultaneously estimating the two-side boundary condition in one-dimension heat conduction problem ”,Forth international symposium with exhibition in heat transfer, Oct, 7-11, 1996, Beijing China.
  74. 田自力,陳朝光, 灰色聚類在機械工程設計上應用於軸承選擇, The First National Symposium on Gray System theory and its Application , Tainan ,Taiwan, Nov . 2. 1996.
  75. 陳朝光(Keynote speech) , 灰色系統理論之過去,現在與未來之發展, The First National Symposium on Gray System theory and its Application , Tainan ,Taiwan, Nov . 2. 1996.
  76. 陳朝光(Keynote speech), 電流變液技術在工程上之應用, 第二十屆全國力學會議,台灣,1996,台北,p 1-8.
  77. 蔡榮順, 陳朝光, 洪振益, 雷射切割加工下的金屬液模受磁場作用之弱非線性穩定性分析, 中華民國第二十屆力學會議, 1996。台灣,台北.
  78. 陳朝光, 鄭慶陽, “Efficiency optimizations of an Irreversible Brayton Heat Engine”, 中國機械工程學會第十三屆全國學術研討會, 台北台灣大學,1996, pp. 233-238.
  79. 陳介力, 姚賀騰, 陳朝光, 非線性支撐圓柱型油膜軸承—轉子系統的動態分析,中國機械工程學會第十三屆全國學術研討會, 台北台灣大學,1996, pp. 125-132.
  80. 黃玉枝, 洪振益, 陳朝光, “An Ecological Optimization Criterion for An Endoreversibal Brayton cycle” , 中國機械工程學會第十四屆全國學術研討會, 1997 , 中壢市中央大學, pp. 295-302.
  81. Min-Hsing Chang and Cha`o-Kuang Chen, “Hydromagnetic Stability of Current Induced Flow in a Small Gap Between Rotating Conducting Cylinders ”, Flow Modeling and Turbulence Measurements VII, Tainan Taiwan, Oct. 5-8, pp. 333-346, 1998.
  82. S. C. Wu and Cha`o-Kuang Chen, “Computer Aided Measuring for Shaft Rotating Accurancy of High Speed Lathe”, Fourth International Symposium on Measurement Technology and Intelligent Instruments, pp. 67-72, 1998.
  83. 黃玉枝, 林裕超, 洪振益, 陳朝光, 不可逆布雷登循環之生態學準則最佳化分析,中國機械工程學會第十五屆全國學術研討會,1998,台南市成功大學, pp. 33-40.
  84. 許寶東, 王啟昌, 陳朝光, “Mixed Convection of Micropolar Fluids Along a Vertical Wavy Surface”, 中國機械工程學會第十五屆全國學術研討會,1998,台南市成功大學, pp. 279-286.
  85. 林錦鴻, 陳朝光, 水平高溫圓柱體在垂直空氣紊流中之熱對流逆問題分析, 中國機械工程學會第十五屆全國學術研討會,1998,台南市成功大學, pp. 417-424.
  86. 王啟昌, 陳朝光, 研磨加工過程之三維逆向熱傳分析, 中國機械工程學會第十五屆全國學術研討會,1998,台南市成功大學, pp. 583-590.
  87. 楊學成, 陳朝光, 球形齒輪運動分析與曲面幾何之研究, 第十六屆機械工程研討會,新竹市清華大學, pp. 490-496,1999.
  88. 林錦鴻, 陳朝光, 楊玉姿,垂直平版散熱片在微極流體作用下之逆解熱傳遞係數分析, 中國機械工程學會第五屆全國學術研討會,1998, pp. 409-416.
  89. 王啟昌, 陳朝光, 微極流體在垂直波形面上之強迫對流分析, 中華民國力學學會第二十二屆全國力學會議,1998, pp. 181-188.
  90. 林錦鴻, 鄭慶陽, 陳朝光, 水平高溫圓柱體在垂直空氣層流中之熱對流逆問題分析, 中華民國力學學會第二十二屆全國力學會議,1998, pp. 399-406.
  91. Min-Hsing Chang and Cha`o-Kuang Chen, “Hydromagnetic stability of current induced flow in a small gap between rotationg conducting cylinders”, Flow modeling and turbulence measurements, pp. 333, 1998.
  92. Cha`o-Kuang Chen and S. C. Wu, "Computer aided measuring of rotating shaft roundness error for high speed machine tool", Fourth international symposium on MEASUREMENT Technology and Intelligent Instrument, pp. 67, 1998.
  93. Cheng-Kang Lee and Cha`o-Kuang Chen, “ Method of Determining the Critical Modification Coefficient for the Worm Gear Drive with the Worm Generated by a Curve”, 第三屆全國機構與機構設計學術研討會, pp. 71~78, 2000.
  94. 陳朝光, 洪振益, 黃玉枝, 蒸氣注入式燃氣渦輪機汽電共生系統之熱力和經濟分析, 中國機械工程學會第十七屆全國學術研討會, 2000.
  95. 葉彥良, 賴新一, 陳朝光, “Double-Mode Modeling of Chaotic and Bifurcation Dynamics for a Simply-Supported Rectangular Plate in Large Deflection” , 中國機械工程學會第十七屆全國學術研討會, 2000.
  96. 游步平, 李政鋼, 陳朝光, 修整型雙接觸點軸向圓弧齒圓柱蝸桿蝸輪傳動分析, 中國機械工程學會第十七屆全國學術研討會, 2000.
  97. 陳朝光, 李政鋼, “Method of crowning by application of a blade-disk for helical gear pair with involute gear and Wildhaber-Novikov pinion” , 中國機械工程學會第十七屆全國學術研討會, 2000.
  98. 蔡居萬, 吳昌祚, 陳朝光, “A Study of NC Machining for Compound Surfaces Using Differential Geometry”, 中國機械工程學會第十七屆全國學術研討會, 2000.
  99. 林大偉、陳朝光, ”分子動力學於空穴流上之研究,” 中國機械工程學會第十七屆全國學術研討會, 2000.
  100. 陳朝光, 翁輝竹,“黏性流體在共軸螺旋轉圓柱中穩定性分析”,中華民國第二十六屆全國力學會議, 2002.
  101. 陳朝光, 翁輝竹,“微渠道內壓力驅動流場特性分析:偶應力與液體邊界滑動效應”,中國機械工程學會第二十屆全國學術研討會, 2003.
  102. 陳朝光, 翁輝竹,“共軸螺旋轉圓柱中液體動力穩定性分析”,中華民國第二十七屆全國力學會議, 2003.
  103. 陳朝光, 卓慶章, 考慮滑動邊界影響下,微渠道內電滲流流場特性分析, 中國機械工程學會第二十一屆全國學術研討會, 2004.
  104. 林恆如, 陳朝光, 體積流率變化對微管內流體非穩態流動特性之分析, 中國機械工程學會第二十一屆全國學術研討會, 2004.
  105. 陳朝光, 翁輝竹,“垂直微環形流道內自然對流”,中國機械工程學會第二十二屆全國學術研討會, 2005.
  106. 陳朝光, 翁輝竹,“鐵磁流體在平行平版中壓力驅動流場特性分析:鬆弛時間效應”,中國機械工程學會第二十二屆全國學術研討會, 2005.
  107. 陳朝光, 翁輝竹,“鐵磁流體在平行平版中剪力驅動流場特性分析:鬆弛時間效應”,中華民國第二十九屆全國力學會議, 2004.
  108. 陳朝光, 翁輝竹,“垂直渠道內發展自然對流”,中華民國第二十九屆全國力學會議, 2005.
  109. 翁輝竹, 陳朝光,“垂直渠道內自然對流:尺寸效應”,中國機械工程學會第二十三屆全國學術研討會, 2006.
  110. 翁輝竹, 陳朝光,“垂直微渠道內自然對流:可變的物理性質效應”,中國機械工程學會第二十三屆全國學術研討會, 2006.
  111. Huei Chu Weng and Cha`o-Kuang Chen, "Couette flow of micropolar fluids: Effect of wall-surface microrotation velocity", the 24th National Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers, Chung-Li, Taiwan, 2007.
  112. Huei Chu Weng and Cha`o-Kuang Chen, "Beyond Maxwell: Maxwell-Burnett slip law for gas microflow", the 24th National Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers, Chung-Li, Taiwan, 2007.

三、其他著作

  1. Ching-Yang Cheng, Shun-Ching Lee and Cha`o-Kuang Chen, “Recent Advances in Finite Time Thermodynamics”, Nova Science Publishers, INC. p 425-448. 1999.
  2. Cha`o-Kuang Chen and Shih-Wen Hsiao,“Transport phenomena in porous media”, editor Derek B. Ingham. Pergamon, pp. 31-56. 1990.
  3. 馬豪言, 陳朝光, 中國式姓名學, 中國姓名學統計研究室, 1963.
  4. 陳朝光, 熔接大意, 三民書局, 1978.
  5. 陳朝光, 郭興家, 液壓控制與實習, 三民書局, 1987.
  6. 陳朝光等合著, CNS機械製圖, 高立出版社, 1990.
  7. 陳朝光, 王明庸, 黃泰翔主編, 最新CNS 工程製圖, 高立出版社, 1991.
  8. 陳朝光, 王明庸, 黃泰翔主編, 最新CNS 機械設計製圖, 高立出版社, 1996.
  9. 陳朝光, 陳銘崑主編, 工程圖學, 高立出版社, 1997
  10. 陳朝光, 王明庸, 黃泰翔主編, 圖學(全), 高立出版社, 1998.
  11. 陳朝光, 陳介力, 楊錫凱編著, 自動控制, 高立出版社, 1998.