Skip to Content

陳國聲

personal pictures

教授
姓名 陳國聲 (Kuo-Shen Chen)
組別 固體力學組
教授室 機械系館七樓91710
分機 62192
傳真機 06-2352973
電子信箱 kschen@mail.ncku.edu.tw
個人網站 http://140.116.155.39/
學歷
  1. 美國麻省理工學院 機械系 博士(美國 8409 - 8802 )
  2. 美國麻省理工學院 機械系 碩士(美國 8209 - 8406 )
  3. 國立清華大學 動力機械系 學士(中華民國 7409 - 7806 )
經歷
  1. 國立成功大學 教授 (960801 - 0)
  2. 國立成功大學 副教授 (920801 - 960731)
  3. 國立成功大學 助理教授 (880801 - 920801)
專長
  1. 結構振動控制
  2. 固力結構與材料機械性質
  3. 微機電系統設計分析
  4. 精密機械與機電整合
教師研究介紹
服務

A.校內研究服務:

 1.準分子雷射與微細加工Lab committee member (1999-2005)
 2.系統動態實驗室 committee member (2000~)
 3.微系統中心 SCCO2 負責老師 (2002~)
 4.奈米科技與微系統工程研究所合聘師資 (2002~)
 5.成大微系統中心薄膜應力量測儀負責老師 (2004~)
 6.國科會南區微系統中心共同實驗室組長 (2003/10 - 2004/7)

B.期刊論文審查:

 1.Reviewer: Journal of Mechanics (2004~)
 2.Reviewer: Springer Journal of Material Sciences (2006~)
 3.Reviewer: ASME Journal of Fluid Engineering (2006~)
 4.Reviewer: ASME Journal of Vibration and Acoustics (2008~)
 5.Reviewer: Elservier Mechatronics (2006~)
 6.Reviewer: IOP Journal of Micromechanics and Microengineering (2006~)
 7.Reviewer: Blackwell Strain Journal (2007~)
 8.Reviewer: Journal of Chinese Society of Mechanical Engineer (CSME) (2000~)
 9.Reviewer: Elsevier Optics Communications (2007~)
 10.Reviewer: 科儀新知月刊 (2007~)
 11.Reviewer: Elsevier Microelectronics Reliability(2009)
 12.Bentham E-book publication proposal reviewer (2009)
 13.Reviewer: Tamkang Journal of Science and Engineering (2008~)
 14.Reviewer: Springer International Journal of Advanced Manufacturing Technology (2008~)
 15.Reviewer: IEEE Transaction on Industrial Electronics (2008~)
 16.Reviewer: IEEE Transaction on Automation Science and Engineering (2008~)
 17.Reviewer: Thin Solid Films (2008~)
 18.Reviewer: International Journal of Precision Engineering and Manufacturing (2008~)
 19.Reviewer: Journal of Control and Intelligent Systems (2009~)
 20.Reviewer: Journal of Vibration and Control (2009~)
 21.Reviewer: IEEE/ASME Journal of Microelectromechanical Systems (JMEMS) (2004~)
 22.Reviewer: IEEE/ASME Transaction of Mechatronics (2009~)
 23.Reviewer: Elsevier Computer Aided Design (JCAD) (2005~)
 24.Reviewer: Journal of Chinese Institute of Engineers (JCIE) (2004~)
 25.Reviewer: IOP Journal Nanotechnology (2005~)
 26.Reviewer: Surafce and Coating Technology (2009~)
 27.Reviewer: Current Nanoscience (2009~)
 28.Reviewer: Elsevier Measurement (2009~)
 29.Reviewer: Sensor (2010~)
 30.Georgia National Science Foundation Project Reviewer (2009~)
 31.Reviewer: IET Micro and Nano Letters (2010~)
 32.Reviewer: Springer Journal of Mechanical Sience and Technology (2010~)
 33.Reviewer: Pearson (Prentice-Hall) Book Proposal reviewer (2010~)
 34.Reviewer: Asian Journal of Control (2011~)
 35.Reviewer: IEEE Sensor Journal (2011~)
 36.Reviewer: IEEE Transaction on Device and Materials Reliability (2011~)
 37.Reviewer: Microelectronics Journal (2011~)
 38.Reviewer: Sensors and Actuators A: Physical (2011 ~)

C.學術會議服務:

 1.Reviewer: Material Research Soceity 2000 Fall Meeting Symposium (2000)
 2.第23屆中國機械工程學會研討會論文審查委員 (2004)
 3.Program Committee: 第八屆奈米工程與微系統技術研討會 (2004, 清華大學)論文審查委員會 (2004)
 4.Program Committee: 第九屆奈米工程與微系統技術研討會(2005, 南台科技大學)論文審查委員會 (2005)
 5.Program Committee: 第十屆奈米工程與微系統技術研討會(2006 工研院)論文審查委員會 (2006)
 6.2006 International Electron Devices and Materials Symposia (IEDMS) 論文審查委員 (2006)
 7.SME2006 審稿委員 (2006)
 8.2006年澎湖風車設計大賽評審委員 (2006)
 9.Program Committee: 第十一屆奈米工程與微系統技術研討會(2007, 中興大學)論文審查委員會 (2007)
 10.Program Committee: 第十三屆奈米工程與微系統技術研討會(2009, 交通大學)論文審查委員會 (2009)
 11.ASME MSEC07 reviewer (2007)
 12.ASME IDETC 2009 reviewer (2009)
 13.IEEE/NIH Life Science System Applications Wo9rkshop 2007(LISA 2007) reviewer (2007)
 14.第二屆海峽兩岸實驗力學研討會總幹事 (Oct. 2007, 成功大學)
 15.Session Chair, 5th Internal symposium on environmental vibrations (ISEV 2011)
 16.2007 International Conference on Advanced Manufacture (ICAM 2007, Nov. 26-30 NCKU) Technical Committee
 17.ISFM2007 (International Forum on System and Mechatronics, Dec. 3-6, 2007 NCKU) Program Committee
 18.Fourth APCOT, Session Chair (06/25/08)
 19.第26屆中國機械工程學會研討會幹事 (11/21/2009)
 20.準分子雷射與微奈米應用研討會, Aug. 26, 2002 (台南成功大學)
 21.微機電分析模擬軟體 Workshop. June 26-28, 2003 (台南成功大學)

D.校外學術服務:

 1.國科會第六屆大專院校創意競賽國際賽執行秘書(2005)
 2.行政院精密儀器發展中心微機電系統技術與應用專書編審委員會委員 (2003)
 3.2005年澎湖風車設計大賽評審委員 (2005~)
 4.逢甲大學新聘/昇等外審委員 (2005~)
 5.正修科技大學新聘/昇等外審委員 (2006~)
 6.清華大學新聘/昇等外審委員 (2008~)
 7.中興大學新聘/昇等外審委員 (2008~)
 8.台灣大學新聘/昇等外審委員 (2008~)
 9.輔英科技大學新聘/昇等外審委員 (2009~)
 10.清華大學技轉中心專利審查委員 (2008~)
 11.清華大學聘用博士後研究外審委員 (2009~)
 12.經濟部2015精密機械技術發展規劃評論委員 (2007)
 13.國家晶片設計中心(CIC)晶片設計審查委員 (2008~)
 14.高雄應用科技大學畢業專題評審委員 (Dec. 18, 2009)
 15.台灣大學, 清華大學, 交通大學, 中正大學, 台灣科技大學, 高雄第一科技大學, 高雄應用科技大學, 南台科技大學 等校畢業學位
      口試委員 (2000 - )
 16.台灣大學, 清華大學,交通大學, 中興大學, 崑山科技大學, 南台科技大學, 台灣科技大學 中華大學 中山大學專題演講
 17.國科會工程處自動化學門產學計畫複審委員 (2009-)
 18.99年度中國工程師學會工程論文獎及石延平教授紀念論文獎評選委員 (2010)
 19.The 16th World Micromachine Summit 台灣代表 (April 2010, Dortmund, Germany)

E.行政服務:

 1.學術委員會(2001/8/1-2002/7/31, 2007/2/1 - 2007/7/31)
 2.研究規劃委員會 (2003/8/1 - 2004/7/31)
 3.課程委員會 (2005/8/1 - 2006/7/31)
 4.固力組召集人 (2006/8/1 - 2007/7/31)
 5.奈微所所務發展委員會 (2007/8/1 - 2008/7/31)
 6.機械系教評委員 (2008/8/1 - 2010/7/31, 2011/8/1-2012/7/31)
 7.機械系新聘教師委員會召集人 (2008)
 8.機械系新聘教師委員會委員 (2009, 2011)
 9.學術委員會召集人 (2011/8/1-2012/7/31)

榮譽

 1. Best Pape Award, ASME Society-Wide Micro/Nano Technology Forum, IMECE 2008 (Nov. 2008, Boston, MA)
 2. 2nd best paper prize, the 21st Annual Cocoa Beach Conference and Exposition, The American Ceramic Society, jan 12-16, 1997.
 3. 國科會甲等獎助 (2000年)
 4. 國立清華大學動力機械系 1989級第一名畢業
 5. 國科會吳大猷紀念獎 (機械學門 2005)
 6. 指導參加 2009年韓國首爾國際發明展, 題目: 「趴趴走的綠色 空間精靈」, 獲選金牌獎, 大會特別獎 ( 俄國科學與技術合作協
  會特別獎,塞爾維亞特別獎) (Dec. 07, 2009)
 7. Best Paper award, J. Chinese Institute of Engineer (2007)
 8. NCKU工學院明日之星計畫獲獎人 (2007)
 9. 中國工程師學會石延平論文獎 (2008)

專利

 1. D. C. Roberts, N. W. Hagood IV, S. W. Pulitzer III, M. A. Schmidt, H. Li, J. L. Steyn, R. Mlcak, K.T.Turner, S. M. Spearing, and K-S Chen,
  "MICROACTUATOR HAVING AMPLIFIED ACTUATION STROKE," US Patent Application, 09/975,730, Oct. 2001
 2. 蔡明祺, 陳國聲, 鄭泰昇, 陳添智, 姚武松, 張廉凱, 陳柏維, 潘辰安, 陳鵬倫, 智慧型建築體, 中華民國發明專利(申請中, 2010)

著作

A.期刊論文

 1.S. M. Spearing and K-S Chen, 1997/08, "Micro Gas Turbine Engine Materials and Structures," Ceramic Engineering and Science Proceedings, Vol.
  18(4), pp. 11-18. (EI)
 2.Kuo-Shen Chen, A. A. Ayon, S. M. Spearing, 2000/06, "Controlling and Testing the Fracture Strength of Silicon on the Mesoscale," J. American
  Ceramic Society, Vol. 83, no. 6, pp. 1476-1484. (SCI, IF=1.396)
 3.Kuo-Shen Chen, S. Mark Spearing, Noel N. Nemeth, 2001/04, “Structural Design of a Silicon Micro Turbo Generator”, AIAA Journal, Vol. 39,
  No. 4, pp. 720-728. (SCI, IF=0.970)
 4.林士淵, 陳建元, 陳國聲, “材料機械行為與微機電設計,” 微系統科技協會季刊第四期, pp. 13-28, April,2001.
 5.X. Zhang, K-S Chen, R. Ghodssi, A. A. Ayon, and S. M. Spearing, 2001/07, “Residual Stress and Fracture in Thick Tetraethylorthosilicate
  (TEOS)and Silane-Based PECVD Oxide Films, Sensors and Actuators (A), Vol. 91. pp. 379-386. (SCI, IF=1.434).
 6.Y. N. Su, K-S Chen, D. C. Roberts, S. M. Spearing, 2001/11, “Large Deflection Analysis of Thin Annular Plates,” J. Micromechanics and
  Microengineering, Vol. 11, pp. 645-654. (SCI, IF=2.499)
 7.K-S Chen*, A. A. Ayon, X. Zhang, S. M. Spearing, 2002/06, "Effect of Process Parameters on the Surface Morphology and Mechanical
  Performance of Silicon After Deep Reactive Ion Etching (DRIE)”, ASME/IEEE J. Microelectromechanical Systems, V. 11, pp. 264-275(SCI,
  IF=3.005)
 8.K-S Chen*, D. L. Trumper, S. T. Smith, 2002/10, “Design and Control of an Electromagnetically Driven X-Y-针 Stage,” Precision 
  Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, Vol. 26, pp.355-369, 2002. (SCI, IF=0.853)
 9.K-S Chen*, S-Y Lin, and J-Y Chen, 2002/07, “Fracture Analysis of Thick PECVD Oxide Films for Improving Structural Integrity of Power
  MEMS,"J. Micromechanics and Microengineering,V. 12, pp. 714-722. (NSC89-2212-E-006-093) (SCI, IF=2.499)
 10.K-S Chen* and K-S Ou, 2002/11, "Modification of Curvature-Based Thin Film Residual Stresses Measurement for MEMS Applications",J.
  Micromechanics & Microengineering, V.12, pp. 917-924. (NSC90-2212-E-006-055) (SCI, IF=2.499)
 11.K-S Chen*, J-J Zheng, and H-M Yeh, 2002/12 “Development of MEMS Fabrication Emulator By Solid Modeling Technology,” J. Chinese 
  Society of Mechanical Engineering,, V. 23, pp. 525-532. (NSC90-2212-E-006-055) (EI)
 12.X. Zhang, K-S Chen, S. M. Spearing, 2003/01, "Thermal Mechanical Behavior of Thick PECVD Oxide Films for Power MEMS
  Applications,"Sensors and Actuators (A), Vol. 103, pp. 263-270. (NSC90-2212-E-006-035)(SCI, IF=1.434)
 13.陳國聲, “微獵能器之概念設計與實作,” 微系統暨奈米科技協會會刊第九期, pp. 65-74, 2003.
 14.K-S Chen*, X. Zhang, and S-Y Lin, 2003/07, “Intrinsic Stress Generation and Relaxation of Plasma Enhanced Chemical Vapor Deposited Oxide
  During Deposition and Subsequent Thermal Cycling,” Thin Solid Films, V434, pp.190-202. (NSC89-2212-E-006-093) (SCI, IF=1.666)
 15.李永春, 陳國聲, "成大機械系準分子雷射與微細加工實驗室簡介, 中華民國機構與機器原理學會會刊, Vol. 14, No. 5, pp. 34-38,
  2003.
 16.K-S Chen* and C-C Ho, 2004/01 “Electromagnets Calibration Utilizing the Pull-In Instability,” Precision Engineering- Journal of the
  International Societies for Precision Engineering and Nanotechnology ,Vol. 28,1, 106-115. (SCI, IF=0.853) (NSC90-2218-E-006-035)
 17.K-S Chen*, J-F Yin, T-S Yang, and K-S Ou, 2004/02 “Vibration Suppression of a Cantilever Beam by Input Shaping,” J. Chinese Society of
  Mechanical Engineering, Vol. 25, pp. 59-67 (EI) (NSC90-2212-E-006-059, NSC92-2212-E-006-122)
 18.K-S Chen*, L-M Li, and K-S Ou, 2004/02 “Accuracy Assessment of Simplified Electromechanical Coupling Solvers for MEMS
  Applications” J. Micromechanics & Microengineering, V. 14, pp. 159-169. (SCI, IF=2.499) (NSC90-2212-E-006-055)
 19.T-S Yang, N-T Hsu, K-S Chen, and F-H Ko, 2004/04 “Analysis of Experimental Data for Metallic Impurity Out-Diffusion from Deep
  Ultraviolet Photoresist,” J. Electrochemistry Society, Vol. 151, No. 2, pp. G149-G154. (SCI, IF=2.190) (NSC-90-2212-E-006-059, NSC-91-
  2212-E-006-082)
 20.K-S Chen* and K-S Ou, 2004/04 "Equivalent Strengths for Reliability Assessment of MEMS structures," Sensors & Actuators A, Vol. 112, pp.
  163-174, 2004. (SCI, IF=1.434) (NSC90-2218-E-006-035, NSC90-2212-E-006-055)
 21.J-K Chen, I-K Lin, F-H Ko, C-F Huang, K-S Chen and F-C Chang, 2004/09 “Behavior and Surface Energies of Polybenzoxazines formed by
  Polymerization with Argon, Oxygen, and Hydrogen Plasmas,” Journal of Polymer Science B: Polymer Physics,vol. 42, pp. 4063-4074, 2004.
  (SCI, IF=1.739) (NSC-91-2721-2317-100)
 22.K-S Chen*, T. Y. Chen, J-C Chuang, and I-K Lin, 2004/09 "Full- Field Wafer Level Thin Film Stress Measurement By Phase-Stepping Shadow
  Morie," IEEE Transaction of Component and Packaging Technology, Vol. 27, 3, pp. 594-601, 2004. (SCI, IF=0.989) (NSC-91-AT7-006-001,
  NSC-93-AT7-006-001, NSC-91-2622-E-006-007-CC3)
 23.K-S Chen*, J-F Yin, T-S Yang, K-S Ou, 2004/09 "Residual Vibration Suppression of a Cantilever Beam Using Command Shaping Technology,"
  Trans. Aeronautical and Astronautical Soc. ROC, Vol. 36, 3, pp. 249-257, 2004. (EI) (NSC92-2212-E-006-122, NSC92-2212-E-006-116,
  NSC92-2623-7-006-014)
 24.陳國聲, 磁浮致動器在線性精密運動機械之應用與發展, 電機月刊, Oct. 2004, pp. 148-161.
 25.歐廣順, 陳國聲 “微靜電致動系統機電耦合分析方法,” 微系統暨奈米科技協會季刊, Vol. 12, pp. 67-81, 2004.
 26.葉修銘, 陳國聲, “以幾何模擬建構微機電製程模擬系統,” 微系統暨奈米科技協會季刊, Vol. 12, pp. 18-38, 2004.
 27.K-S Chen*, I-K Lin, and F-H Ko, 2005/10 “Fabrication of 3D Polymer Microstructures Using Electron Beam Lithography and Nanoimprinting
  Technologies,” J. Micromechanics and Microengineering, Vol. 15, pp. 1894-1903, 2005. (SCI, IF=2.499) (NDL-93S-C091)
 28.T-S Yang, K-S Chen, C-C Lee, and J-F Yin, 2006/01 “Suppression of Motion-Induced Residual Vibration of a Cantilever Beam by Input
  Shaping,” J. Engineering Mathematics, V.54, pp. 1-15, 2006. (SCI, IF=0.885) (NSC-90-2212-E-006-059, NSC-91-2212-E-006-082, NSC-92-
  2212-E-006-122)
 29.Kuo-Shen Chen*, Bor-Zone Chen, and Chin-Chuang Huang, 2006/12 "Design and Control of a Piezoelectrical Driven Fatigue Testing System for
  Electronic Packaging Applications", IEEE Trans. Components and Packaging Technologies, Vol. 29, pp. 841-849, 2006. (SCI, IF=0.989) (NSC-
  89-2212-E006-120, NSC-92-2212-E-006-116)
 30.K-S Chen*, T-S Yang, and J-F Yin, 2006/12 “Residual Vibration Suppression for Duffing Nonlinear Systems with Electromagnetically
  Actuation Using Nonlinear Command Shaping Techniques,” ASME J. Vibrations and Acoustics, Vol. 127, pp. 778-789, 2006. (SCI, IF=0.565)
  (NSC-91-2212-E-006-082 ,NSC-91-2212-E-006-016 ,NSC-92-2623-7-006-014)
 31.K-S Chen* and R-F Hsu, 2007/03 "Evaluation of Environmental Effects on Mechanical Properties and Characterization of Creep Behavior of
  PMMA," J. Chinese Institute of Engineering, Vol. 30, pp. 267-274, 2007. (SCI, IF=0.190) (NSC-89-2212-E-006-120, NSC-91-2212-E-006-016)
 32.T.-S. Yang, K.-S. Chen, C.-C. Lee and I. Hu, 2007/04 "Effects of system payload on the suppression of motion-induced residual vibration by
  input shaping," J. Eng. Mathematics, Vol. 57, pp. 365-379, 2007. (SCI, IF=0.885) (NSC-92-2212-E-006-122, NSC-93-2212-E-006-087)
 33.K-S Chen* and K-S Ou, 2007/05 "Development and Verification of Dynamic Electromechanical Coupling Solver for Micro-Electrostatic-Actuator
  Applications," Sensors & Actuators A Physical, Vol. 136, pp. 403-411 (SCI, IF=1.434) (NSC-92-2623-7-006-014)
 34.K-S Chen* and K-S Ou, 2007/06 "Command Shaping Techniques for Electrostatic MEMS Actuation: Analysis and Simulation," IEEE J.
  Microelectromechanical Systems, Vol. 16, pp. 537-549, 2007. (SCI, IF=3.005) (NSC-94-2212-E-006-046)
 35.H-M Yeh, K-S Chen*, and I-K Lin, 2007/06 "Development of 3D Electron Beam Lithography Fabrication Simulator," Tamkang Journal of
  Science and Engineering, Vol. 10, pp. 167-172, 2007. (EI). (NSC-95-2221-E-006-399-MY2)
 36.K-S Ou, H-Y Yan, and K-S Chen*, “Mechanical Characterization of KMPR by Nanoindentation for MEMS Applications," Strain, Vol. 44, pp.
  267, 2008. (SCI, IF=0.535) (NSC-94-2212-E-006-046)
 37.K-S Chen* and H-M Yeh, "Development of Geometrical Based Fabrication Emulator for MEMS Micromachining and Excimer Laser Ablation,"
  J. Chinese Institute of Engineers, Vol. 31, pp. 41-51, 2008. (SCI, IF=0.190) (NSC-95-2221-E-006-399-MY2)
 38.H-Y Yan, K-S Ou, and K-S Chen*, "Mechanical Properties Measurement of PECVD Silicon Nitride after Rapid Thermal Annealing Using
  Nanoindentation Technique," Strain, Vol.44, pp. 259, 2008.(SCI) (NSC-94-2212-E-006-046)
 39.K-S Chen*, T-C Chen, and K-S Ou, "Development of Semi-Empirical Formulation to Extracting Materials Proper Through Indentation Tests:
  Residual Stresses, Substrate Effect, and Creep," Thin Solid Films, Vol. 516, pp. 1931-1940, 2008.
 40.K-S Ou and K-S Chen*,T-S Yang, and S-Y lee "A Command Shaping Approach to Enhance the Dynamic Performance and Longevity of Contact
  Switches," Mechatronics, Vol. 19, pp. 375-389, 2009.
 41.K-S Chen*, T-S Yang, K-S Ou, and J-F Yin, "Design of Command Shapers for Residual Vibration Suppression in Duffing Nonlinear Systems,"
  Mechatronics, Vol. 19, pp. 184-198, 2009.
 42.K-S Chen* and K-S Ou, “Suppression of Motion-Induced Vibration for Electromagnetically Actuated Flexible Structures Using Nonlinear
  Command Shaping Technique,” Journal of Vibration and Control, Vol. 16, pp. 1713-1734, 2010.
 43.K-S Chen*, H-M Yeh, J-L Yan, and Y-C Chen, "Finite Element Analysis on Wafer Level CMP Contact Stress: Re-investigated Issues and the
  Effects of Selected Process Parameters," International J. Advanced Manufacturing Technology, Vol. 42, pp. 1118-1130, 2009.
 44.H-M Yeh and K-S Chen*, "Development of a Cellular-Automata-Based Process Emulator for 3D Structure Fabrication Using Electron-Beam
  Lithography," IEEE J. Industrial Electronics, Vol. 56, No. 4, pp. 926-936, April 2009.
 45.T-S Yang, Y-C Wang, K-S Chen, Y-C Chen, and J-L Yan, "Optimization of Wafer-back Pressure Profile in Chemical Mechanical Planarization,"
  J. Electrical Chemical Society, Vol. 155, H720-729, 2008.
 46.I-K Lin, Y-M Liao, Y. Lu, K-S Ou, K-S Chen, and X. Zhang,"Mechanical Behavior of Soft Microcantilevers-based Force Sensors," Applied
  Physics Letter, Vol. 93, 251907, 2008.
 47.I-K Lin, Y-M Liao, Y. Lu, K-S Ou, K-S Chen, and X. Zhang,"Elastic and Viscoelastic Characterization and Modeling of Polymer based
  Structures for Biological Applications," IEEE/ASME J. Microelectromechanical Systems, Vol. 18,pp. 1087-1099, 2009.
 48.K-S Chen*, K-S Ou, and Y-M Liao, "On the Influence of Roller Misalignments on the Web Behavior during Roll-to-Roll Processing" JCIE, Vol.
  34, pp. 87-97, 2011.
 49.C-X Dai and K-S Chen*, "Residual Vibration Suppression of Crane Movement by Input Shaping: Experimental Investigation and Finite Element
  Dynamics Simulations" Journal of the Chinese Society of Mechanical Engineers(Accepted, Sep. 23, 2011)
 50.H-M Yeh and K-S Chen*, "Development of a Pad Conditioning Simulation Module with a Diamond Dresser for CMP Applications," IJAMT,
  Vol. 50, pp. 1-12, 2010.
 51.Tian-Shiang Yang, Ian Hu, Kuo-Shen Chen, Chia-Liang Liu, and Yao-Chen Wang,"Effects of Retaining Ring on Contact Stress Uniformity in
  Chemical Mechanical Planarization," Journal of the Chinese Society of Mechanical Engineers, Vol.30, No.5, pp.381~392 (2009)
 52.吳秉欣, 陳國聲*, "磁控濺渡氮氧化矽薄膜材料之機械性質檢測與分析," 微系統暨奈米科技協會季刊, Vol. 22, pp. 27-43, 2009.
 53.T-S Yang, I. Hu, and K-S Chen, "Synergetic Effects of Wafer Rigidity and Retaining-Ring Parameters on Contact Stress Uniformity in Chemical
  Mechanical Planarization" IJAMT, Vol. 56, pp.523-538, 2011.
 54.K-S Ou, K-S Chen*, T-S Yang, and S-Y Lee, "Fast Positioning and Impact Minimizing of MEMS Devices by Suppression of Motion-Induced
  Vibration by Command Shaping Method," IEEE/ASME J. Microelectromechanical Systems, Vol. 20, pp. 128-139, 2011.
 55.K.-S. Ou, K.-S. Chen*, T.-S. Yang, and S.-Y. Lee," A Novel Semi-Analytical Approach for Finding Pull-in Voltages of Micro Beams Subjected
  to Electrostatic Loads and Residual Stress Gradients," IEEE/ASME J. Microelectromechanical Systems, Vol. 20, pp. 527-537, 2011.
 56.W-C Lin, C-X Dai, D-L Deng, K-S Ou, and K-S Chen*, "Performance Evaluation of Drift-Free Integration for Navigation and Velocity Feedback
  Applications," JCIE (Accepted, May. 01, 2011)
 57.P-H Wu, I-K Lin, H-Y Yan, K-S Ou, K-S Chen*, and X Zhang, "Mechanical Properties Characterization of Sputtered and Plasma Enhanced
  Chemical Deposition (PECVD) Silicon Nitride Films: Comparisons and Applications" Sensors andActuators A: Physical, Vol. 117, pp. 117-126,
  2011.
 58.陳國聲,"模組化無線感測與致動器設計及其智慧化居住空間之應用-子計畫二: 壓電載具與智慧化居住空間之感測系統設計,"
  工程科技通訊(invited, in press) 2011.
 59.B-W Chen, D. Gu, K-S Ou, M-H Chen, and K-S Chen*,"IR Indoor Localization andMotion Control in Smart Living SpaceApplications Based on
  Wiimote Technology: A Preliminary Demonstration," Mechatronics (submitted) 2011.
 60.A. Barton-Martinelli, D. Cuff, K.-S. Chen, and D. L. Trumper, "Design and Realization of a Novel Rubber Mechanical Properties Characterization
  System" Precison Engineering (to be submitted) 2011.
 61.C-H Pi, K-S Ou, and K-S Chen*, "A One-Dimensional Touch Panel Based on Strain Sensing," Mechatronics (Submitted) 2011
 62.廖彥鳴, 歐廣順, 林奕寬, 陳國聲*, "Polydimethylsiloxane (PDMS) 機械性質檢測﹑力學模型建立、與其在細胞力學方面應用," 科
  儀新知(invited, 2011).
 63.K-S Chen and D. L. Trumper, "On the Stiffness of Elastomer Bearings for Precision Machine Design," IJMS (Submitted, Nov. 22, 2011)
 63.M-H Chen, Y-D Fu, K-S Ou, and K-S Chen, "Development of Navigation Schemes for Mobile Robot Group toward Biomimetic Applications",
  International Journal of Automation and Smart Technology (Invited, 2011)

B.研討會論文

 1.D. Gu, Y-D Fu, K-S Ou, and K-S Chen, "Wiimote-based indoor localization for smart living space applications,"6th Japan-Taiwan Workshop on
  Mechanical and Aerospace Engineering, Sapporo, Japan, Dec. 7-10, 2011
 2.K-S Ou and K-S Chen, "An energy-based approach for pull-in voltage estimation of micro cantilever beams with effects of residual stress gradients
  and capacitance fringing" 6th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, Sapporo, Japan, Dec. 7-10, 2011
 3.A. Barton-Martinelli, D. Cuff, K-S Chen, and D. L. Trumper, "Design and Realization of a Novel Elastomer Mechanical Properties Characterization
  System" ASPE 2011 Annual Meeting, Nov. 2011, Denver, CO, USA (Accepted).
 4.Y. H. Liu, C. M. Chao, C. T. Lu, and K-S Chen, "Vibration control on single axis flexible piezoelectric positioning stage by PID controller", the 5th
  International Symposium on Environmental Vibrations (ISEV 2011), Oct 20-22, Chengdu, China, 2011.
 5.M.-H. Chen, D. Gu, Y.-D. Fu, C.-H.Pi, K.-S.Ou, and K.-S. Chen, "Wireless Group Manipulation of Autonomously Guided Mobile Robots for
  Smart Living Space Applications",Proc. SICE 2011, 50th Annual Conf. of the Society of Instrument and Control Engineers of Japan, pp. 2143-
  2148, Sep. 2011, Tokyo, Japan.
 6.C-H Pi, K-S Ou, M-H Chen, and K-S Chen, "Analysis, Simulation, and Experimental Investigations of a One Dimensional Touch Panel Based on
  Strain Sensing" Proc. SICE 2011, 50th Annual Conf. of the Society of Instrument and Control Engineers of Japan, pp. 1954-1959, Sep. 2011,
  Tokyo, Japan.
 7.Z-K Huang, K-S Ou, and K-S Chen, "Nanoindentation Characterization of PECVD Silicon Nitride on Silicon Subjected to Mechanical Fatigue
  Loading," MRS Fall Meeting, Boston, MA, USA, Dec 2010.
 8.P-W Chen, K-S Ou, and K-S Chen, "IR Indoor Localization and Wireless Transmission for Motion Control in Smart Building Applications based
  on Wiimote Technology," IEEE SICE 2010, Taipei, Taiwan, Aug. 2010 (Accepted).
 9.I-K Lin, P-H Wu, K-S Ou, K-S Chen, X. Zhang, "The Tunability in Mechanical Properties and Fracture Toughness of Sputtered Silicon Oxynitride
  Thin Films for MEMS-based Infrared Detectors" MRS Fall Meeting, Boston, MA, USA, DEc 2009.
 10.K-S Ou, I-K Lin, P-H Wu, K-S Chen, X. Zhang, "Mechanical Characterization of Atomic Layer Deposited (ALD) Alumina for Applications in
  Corrosive Environments," MRS Fall Meeting, Boston, MA, USA, Dec 2009.
 11.I-K Lin, K-S Ou, K-S Chen, X. Zhang, "CELLULAR FORCE MEASUREMENT IN CARDIAC MYOCYTES USING POLYMER
  MICROPILLAR ARRAY WITH VISCOELASTIC CHARACTERIZATION," Micro TAS 2009, Jeju, Korea, Nov. 2009.
 12.K-S Ou, K-S Chen, T-S Yang, and S-Y Lee, "A Novel Semi-Analytical Approach for Micro Beams Subjected to Electrostatic Loads and Residual
  Stress Gradients," ASME IDETC 2009, Aug 30-Sep. 3, 2009 San Diego, CA, USA.
 13.歐廣順, 林奕寬, 陳國聲, "PDMS 黏彈性質檢測與其在細胞力學上之應用," 第三屆海峽兩岸實驗力學研討會, 呼和浩特, 內蒙古
  July 2009.
 14.K-S Chen and K-S Ou, "Fast Positioning and Impact Minimizing of MEMS Devices by Suppression Motion-Induced Vibration by Command
  Shaping Method," MEMS 2009, Jan 25-29, Sorrento, Italy.
 15.Yang, T.-S., Wang, Y.-C., Chen, K.-S., Chen, Y.-C. & Yen, J.-L. (November 2008) Optimization of wafer-back pressure profile in chemical
  mechanical planarization. Presented at the 2008 Annual Meeting of the Division of Fluid Dynamics, American Physical Society, November 23-25,
  2008, San Antonio, Texas, USA.
 16.I-K Lin, Y-M Liao, Y. Liu, K-S Ou, K-S Chen, and X. Zhang, "Elastic and Viscoelastic Characterization and Modeling of Polymer based
  Structures for Biological Applications," ASME IMECE 2008, Nov. Boston, MA, USA. (Best Paper award)
 17.[A1] I-L Lin, Y-M Liao, K-S Chen, and X. Zhang, "VISCOELASTIC CHARACTERIZATION OF SOFT MICROPILLARS FOR CELLULAR
  MECHANICS STUDY," MicroTAS 2008, San Diego, Oct. 2008.
 18.[A2] I-K Lin, Y-M Liao, Y. Liu, K-S Ou, K-S Chen, and X. Zhang, "Elastic and Viscoelastic Characterization of Polydimethylsiloxane (PDMS)
  for Biological Applications," Hilton Head Conference 2008, June 01-05, 2008.
 19.[A3] H-M Yeh and Kuo-Shen Chen, "Development of Device-Level Chemical-Mechanical Polishing Simulation Module," 4th APCOT, June23-
  25, 2008, Tainan, Taiwan.
 20.[A4] Y-M Liao, I-K Lin, K-S Ou, K-S Chen, and Xin Zhang, "Elastic and Viscoelastic Characterization of Polydimethylsiloxane (PDMS) for
  Biological Applications," 4th APCOT, June 23-25, 2008, Tainan, Taiwan.
 21.[A5] H-Y Yan, K-S Ou, and K-S Chen, “Indentation Characterization of Fracture Toughness and Interfacial Strength of PECVD Nitrides after
  Rapid Thermal Annealing” Materials Research Society Fall Meeting, Boston, MA, Nov 26. 2007.
 22.[A6] I-K Lin, Y-M Liao, K-S Chen, and X. Zhang, “Elastic and Viscoelastic Characterization of Polydimethylsiloxane (PDMS) for Cell-
  Mechanics Applications” Materials Research Society Fall Meeting, Boston, MA, Nov. 26 2007.
 23.[A7] 葉修銘, 陳國聲, "微機電與半導體製程模擬系統發展," 第六屆兩岸三地製造技術研討會, Aug. 18-19, 2007 西安.
 24.[A8] K.-S. Ou, H.-Y. Yan, K.-S. Chen,"Mechanical Characterization of KMPR by Nanoindentation for MEMS Applications," ICEM13, Greece,
  July 2007.
 25.[A9] H.-Y. Yan, K.-S. Ou, K.-S. Chen,"Mechanical Properties Measurement of PECVD silicon Nitride After Rapid Thermal Annealing Using
  Nanoindentation Technique", ICEM13, Greece, July 2007.
 26.[A10] K.S. Chen, T.Y. Chen, H.Y. Yan, I.T. Huang, J.K. Chen, "Mechanical Properties Characteristics of Rubber O-Rings by Digital Image
  Correlation and Nanoindentation," 2007 SEM Annual Conference & Exposition, Springfield, MA, USA. June3-6, 2007.
 27.[A11] Hsiu-Ming Yeh, Kuo-Shen Chen, and I-Kuan Lin, "Development of Electron Beam Lithography 3D Fabrication Emulator: A Current
  Status Report", Proc. Symposium on Nano Device Technology (SNDT) April 28, 2006 Hsinchu, Taiwan
 28.[A12] K.-S. Ou, K.-S. Chen, and J. Shieh, "Characterization of Dynamic Characteristics of RF MEMS Switches: Current Progress and Future
  Perspective" Proc. Symposium on Nano Device Technology (SNDT) April 28, 2006 Hsinchu, Taiwan
 29.[A13] K-S Chen, Residual Vibration Suppression for Duffing Nonlinear Systems with Electromagnetically Actuation Using Nonlinear Input
  Shaping Techniques, Presented in the 1st Cross-Strait Experiemntal Mechanics Workshop, Aug.01-3,2005 Beijing, China.
 30.[A14] Y-Y Wang and K-S Chen, "Probablistic Fatigue Test for MEMS Materials: Conceptural Design and Current Progress"Proc. Symposium
  on Nano Device Technology (SNDT) May 04, 2005. Hsinchu, Taiwan.
 31.[A15] I-K Lin, K-S Chen, and F-H Ko, “Modeling for SU-8 Struuctures Fabricated by Electron Beam Lithography,” Proc. Symposium on
  Nano Device Technology (SNDT), May 11, 2004, pp. 301-304.
 32.[A16] K-S Chen, T. Y. Chen, J-C Chuang, and I-K Lin, “Full- Field Wafer Level Thin Film Stress Measurement By Phase-Stepping Shadow
  Morie,” ICEM12- 12th International Conference on Experimental Mechanics, 29 August - 2 September, 2004 Politecnico di Bari, Italy
 33.[A17] J-K Chen, I-K Lin, F-H Ko, F-C Chang, and K-S Chen, “Plasma Resistance and Behavior of Polybenzoxazine Polymer,” 2003
  International Microprocess and Nanotechnology Conference, Oct. 2003, Japan.
 34.[A18] K-S Chen, K-S Ou, C-H Cheng, R-F Hsu, Y-M Yeh, and T. Y. Chen, "An Improved Wafer Curvature to Film Stress Conversion for
  Residual Stress Measurements", International Symposium on Experimental Mechanics, Taipei, Taiwan, Dec. 2002. (NSC90-2212-E-006-054)
 35.[A19] X. Zhang, K-S Chen, S. M. Spearing, “Residual Stress and Fracture of Thick Dielectric Films for Power MEMS Applications,” 15th
  IEEE International Micro Electro Mechanical Systems Conference (MEMS02), Jan 2002 . (NSC89-2212-E-006-093)
 36.[A20] K-S Chen, “On the Unification of Material Strength Testing for MEMS Applications,” Material Research Society Meeting, Nov. 2001,
  Boston, MA. . (NSC90-2212-E-006-055)
 37.[A21] K-S Chen, X. Zhang, S. M. Spearing, “Processing of Thick Dielectric Films for Power MEMS: Stress and Fracture,” Material Research
  Society Meeting, Nov. 2000, Boston, MA. (NSC89-2212-E-006-093)
 38.[A22] X. Zhang, R. Ghodssi, K-S Chen, A. A. Ayon, and S. M. Spearing, “Residual Stress Characterization of Thick PECVD TEOS Film for
  Power MEMS Application,” Proceeding of 2000 Solid-State Sensor and Actuator Workshop, June 4, 2000, Hilton Head, SC, pp. 316-319.
  (NSC89-2212-E-006-093)
 39.[A23] N. Hagood IV, D. Roberts, L. Saggere, K. Breuer, K-S Chen, J. Carretero, H. Li, R. Mlcak, S. Pulitzer, M. Schmidt, S. Spearing, and Y. H.
  Su, “Micro Hydraulic Transducer Technology for Actuation and Power Generation,” Proceedings of SPIE V3985, pp. 680-688, 2000.
 40.[A24] N. Hagood IV, D. Roberts, M. Schmidt, S. Spearing, K. Breuer, R. Mlcak, J. Carretero, F. Ganji, H. Li, K-S Chen, Y. Su, and S. Pulitzer
  "Development of Micro Hydraulic Transducer Technology", ICAST '99 (International Conference on Adaptive Structures and Technologies)
  Paris, France, October 11-13,1999.
 41.[A25] R. Ghodssi, X. Zhang, K-S Chen, K. A. Lohner, S. M. Spearing, and M. A. Schmidt, “Residual Stress Characterization of Thick PECVD
  Oxide Films for MEMS Applications,” American Vacuum Society 46th International Symposium, Seattle, WA, USA, Oct. 1999.
 42.[A26] Kuo-Shen Chen, S. Mark Spearing, Noel N. Nemeth, “Structural Design of a Silicon Micro Turbo Generator,”AIAA-99-1332,
  Proceedings of the 1999 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April, 1999, pp. 1144-
  1153.
 43.[A27] Kuo-Shen Chen, Arturo A. Ayon, Kevin A. Lohner, Mark A. Kepets, Terran K. Melconian, S. Mark Spearing, “Dependence of Silicon
  Fracture Strength and Surface Morphology on Deep Reactive Ion Etching Parameters,” MRS Fall Meeting, Mat. Res. Soc. Symp. Proc. 546,
  21-26, 1999.
 44.[A28] A. A. Ayon, K. S. Chen, K. A. Lohner, H. H. Sawin, M. A. Schmidt and S. M. Spearing, “Dependence of Silicon Surface Morphology
  on Time Multiplexed Deep Etching Conditions,” Mat. Res. Soc. Symp. Proc. 546, 51-61, 1999*
 45.[A29] Kevin A. Lohner, Kuo-Shen Chen, Arturo A. Ayon, S. Mark Spearing, “ Microfabricated Silicon Carbide Microengine Structures,” Mat.
  Res. Soc. Symp. Proc. 546, 85-90, 1999*
 46.[A30] K-S Chen, A. A. Ayon, S. M. Spearing, "Silicon Strength Testing for Mesoscale Structural Applications," MRS Spring Meeting, MRS
  Symposium Proceeding Vol. 518, pp. 123-130, 1998.
 47.[A31] Epstein, A. H., S.D. Senturia, G. Anathasuresh, A. Ayon, K. Breuer, K-S Chen, F. E. Ehrich, G. Gauba, R. Ghodssi, C. Grosherny, S.
  Jacobson, J.H. Lang, C-C Lin, A Merha, J.M. Miranda, S. Nagle, D.J. Orr, E. Piekos, M.A. Schmidt, G. Shirley, M.S. Spearing, C.S. Tan,
  Y-S Tzeng, I.A. Waitz: "Power MEMS and Microengines," IEEE Transducers '97 Conference, Chicago, IL, June 1997.
 48.[A32] Epstein, A. H, S.D. Senturia, O. Al-Midani, G. Anathasuresh, A. Ayon, K. Breuer, K-S Chen, F.F. Ehrich, E. Esteve, L. Frechette, G.
  Gauba, R. Ghodssi, C. Groshenry, S.A. Jacobson, J.L. Kerrebrock, J.H. Lang, C-C Lin, A. London, J. Lopata, A. Mehra, J.O. Mur Miranda,
  S. Nagle, D.J. Orr, E. Piekos, M.A. Schmidt, G. Shirley, S.M. Spearing, C.S. Tan, Y-S Tzeng, I.A. Waitz, Micro-Heat Engines, Gas Turbines,
  and Rocket Engines - the MIT Microengine Project,” 28th AIAA Fluid Dynamics and 4th AIAA Shear Flow Control Conference, June 1997.
 49.[A33] K-S Chen, A. Montero, D. L. Trumper, S. Smith, and M.E. Williams, " Spring Dominated Regime Design of a High Load Capacity,
  Electromagnetically Driven X-Y- Stage," Proceeding of 10th ASPE Annual Conference, Austin, Texas, Oct. 1995.
 50.[A34] M. K. Hor, J. Y. M. Chen, and K-S Chen, “Wavelet Transform in Depth Recovery,” Proceedings of SPIE International Symposium on
  Intelligent Robotic Systems, Boston, Mass., September 1993.
 51.[A35] M. K. Hor, K-S Chen, and J. Y. M. Chen, “On the Integration of An Experimental Hand-Eye Robot System,” The First Chinese World
  Congress on Intelligent Control and Intelligent Automation, Beijin, China, August 1993.
 52.[B1] K-S Chen, X. Zhang, R. Ghodssi, “Residual Stress and Failure Modeling of Thick PECVD Oxide Films for MEMS Application,” 第一
  屆海峽兩岸微系統研討會會議論文會議論文, May, 2000, Tainan, Taiwan. (NSC89-2212-E-006-093)
 53.[B2] 黃啟川, 陳柏榮, 陳國聲, “壓電驅動之疲勞測試系統設計與分析,” 中華民國第二十五屆全國力學會議論文集pp. 3181 –
  3191, Dec. 2001. (NSC89-2212-E-006-120).
 54.[B3] 林士淵, 陳國聲, “電漿輔助化學氣相沉積二氧化矽薄膜之內應力分析,” 中華民國第二十五屆全國力學會議論文集
  pp. 913 – 923, Dec. 2001. (NSC89-2212-E-006-093).
 55.[B4] 黎立民, 陳國聲, 歐廣順, “微機電系統機電耦合分析模擬,”中華民國第三屆奈米工程及微系統技術研討會, 2002.
  (NSC90-2212-E-006-054)
 56.[B5] 鄭景仁, 黎立民, 陳國聲, 葉修銘, ”以幾何模擬發展微機電製程模擬系統,” 中華民國第三屆奈米工程及微系統技術研討
  會, 2002. (NSC90-2212-E-006-055)
 57.[B6] 陳柏榮, 黃啟川, R-F Hsu, 陳國聲, “壓電驅動材料疲勞測試系統之設計與控制,” 中國機械工程師學會第十九屆學術研討
  會, 2002. (NSC90-2218-E006-035)
 58.[B7] 何正中, 陳國聲, 葉修銘, “等效微機電靜電致動器之控制器設計與實驗驗証,” 中國機械工程師學會第十九屆學術研討
  會, 2002. (NSC90-2218-E006-035) [B8] 何正中, 陳國聲, 林奕寬, “以Pull-in現象校正電磁致動器,” 中國機械工程師學會第十九屆
  學術研討會, 2002. (NSC90-2218-E006-035)
 59.[B9] 黎立民,陳國聲,歐廣順,”微機電系統機電耦合分析模擬,” 第七屆ABAQUS Taiwan User Conference (NSC90-2212-E-006-055).
 60.[B10] 歐廣順, 陳建元, 林士淵, 陳國聲, “以能量法修正曲率量測之微機電薄膜殘留應力量測,” 中華民國第二十六屆全國力
  學會議, 2002. (NSC90-2212-E-006-054).
 61.[B11] 尹瑞豐,陳國聲, 楊天祥, 歐廣順, “輸入修正結構減振之實驗研究,” 中華民國第二十六屆全國力學會議. (NSC90-2212-E-
  006-059).
 62.[B12] 徐年宗, 楊天祥, 陳國聲, 柯富祥, “微影製程中金屬雜質擴散之理論研究與實驗數據分析,” 中國機械工程師學會第十
  九屆學術研討會, 2002. [B13] 林奕寬,莊家澄,陳國聲,陳元方,柯富祥, "應用相位移陰影疊紋法發展晶圓彎曲及薄膜應力檢測系
  統,"第二十屆機械工程研討會, 2003.
 63.[B14] 葉修銘, 陳國聲, "微機電製程模擬器之開發與整合應用," 第二十屆機械工程研討會, 2003.
 64.[B15] 尹瑞豐,陳國聲,楊天祥,陳敬元,"輸入修正方法應用於具Duffing非線性結構系統之減振," 第二十屆機械工程研討會, 2003.
 65.[B16] 陳國聲、張仁宗、李永春、羅裕龍、吳志陽、朱銘祥, "準分子雷射課程與教育實施," 第三屆精密機械製造研討會論文
  集, 2003.
 66.[B17] R-F Hsu,陳國聲,林奕寬,"微小材料機械特性測試系統之設計製作," 第二十屆機械工程研討會, 2003
 67.[B18] 莊家澄, 林奕寬, 陳元方, 陳國聲, 柯富祥, "應用相位移陰影疊紋法量測晶圓彎曲," 中華民國第二十七屆力學會議, 2003.
 68.[B19] T-S Yang, K-S Chen, C-C Li, J-F Yin, and K-S Ou, "Suppression of Motion Induced Residual Vibration of a Cantilever Beam by Input
  Shaping, " 中華民國第二十七屆力學會議論文, 2003.
 69.[B20] 尹瑞豐,陳國聲,楊天祥,陳敬元,"以輸入修正方法抑制磁浮驅動之Duffing 系統之殘留振動," 第二十七屆力學會議, 2003.
 70.[B21]
 71.[B22] 歐廣順,陳國聲, “以結構破壞機率法整合微機電材料測試強度,” 中華民國第二十七屆全國力學會議, 2003.
 72.[B23] K-S Chen, H-M Yeh, I-K Lin, and K-B Huang, "Development of a Solid Modeling MEMS Fabrication Emulator for SMart Process," The
  7th Annular Meeting on Micro/Nano Technology, Taipei, 2003.
 73.[B24] 葉修銘, 陳國聲: "SMart 共用晶片製程包覆犧牲層之結構製程模擬," The 8th Annular Meeting on Micro/Nano Technology,
  Hsinchu, Dec.2004.
 74.[B25] I-K Lin, K-S Chen and F-H Ko, "Development of 3-D Micro Structures Processing Technologies by Using Electron Beam Lithography and
  Nanoimprinting Lithography," The 8th Annular Meeting on Micro/Nano Technology, Hsinchu, Dec.2004.
 75.[B26] 陳拓丞, 陳國聲, “應用因次分析法於具殘餘應力與基材效應之奈米壓痕試驗,” 中國機械工程學會第二十一屆全國學
  術研討會論文集, 高雄中山大學, 2004.
 76.[B27] 林奕寬, 陳國聲, 柯富祥,”表面張力自動組裝三維微結構,”中國機械工程學會第二十一屆全國學術研討會論文集, 高雄
  中山大學, 2004.
 77.[B28] 歐廣順,陳國聲, “微靜電致動系統機電耦合動態分析模組發展及其應用,” 中華民國第二十八屆全國力學會議, 2004.
 78.[B29] 陳敬元, 尹瑞豐, 陳國聲, 楊天祥, “非線性輸入修正法結合回授控制器之減振設計,”第二十八屆力學會議, 2004.
 79.[B30] 顏宏益,顏嘉良,陳敬元,歐廣順,陳國聲, “電磁驅動元件之結構軟化研究,” 中華民國第二十八屆全國力學會議, 2004.
 80.[B31] T-S Yang, K-S Chen, C-C Lee, I. Hu, “Suppression of Motion Induced Vibration of an Elastic Rod by Input Shaping,” 中華民國第二
  十八屆全國力學會議, 2004.
 81.[B32] 胡逸群, 楊天祥, 陳國聲, “以附加配重增進輸入修正法應用於連續系統時之減振效能,” 中華民國第二十九屆全國力學
  會議, 2005.
 82.[B33] 蘇志宏, 楊天祥, 陳國聲, 鍾震桂, “水輔助雷射加工之理論分析與最佳切割速率計算”, 中華民國第二十九屆全國力學
  會議, 2005.
 83.[B34] 蘇志宏, 楊天祥, 陳國聲, 鍾震桂, “水輔助雷射加工之二維理論分析,” 中國機械工程學會第二十二屆全國學術研討會
  論文集, 中壢中央大學, 2005.
 84.[B35] 顏嘉良,歐廣順,陳國聲,楊天祥,“影響CMP接觸壓力相關參數之研究,”第二十九屆中華民國力學學會暨全國力學會議,
  2005.
 85.[B36] 鄭坤銓,陳國聲,楊天祥,“輸入修正法針對連續系統多模態特性之減振運用,”中國機械工程學會第二十二屆全國學術研
  討會,2005.
 86.[B37] 鄭坤銓,陳國聲,楊天祥,“輸入修正法結合回授控制於步階及方波軌跡追蹤之減振應用,”第二十九屆中華民國力學學會
  暨全國力學會議, 2005.
 87.[B38] 陳拓丞,歐廣順,陳國聲,“奈米壓痕潛變與應力鬆弛試驗之模擬,”第二十九屆中華民國力學學會暨全國力學會議, 2005.
 88.[B39] 陳拓丞,張平昇,陳國聲,楊天祥,鍾震桂,“CO2雷射玻璃切割之製程模擬與應力分析,”中國機械工程學會第二十二屆全國
  學術研討會,2005.
 89.[B40] 張平昇,歐廣順,陳國聲,“STI結構應力分析之基本模型建立,”第二十九屆中華民國力學學會暨全國力學會議, 2005.
 90.[B41] 張平昇,陳拓丞,陳國聲,楊天祥,鍾震桂,“CO2雷射玻璃切割製程之應力分析與有限元素模擬,”第二十九屆中華民國力學
  學會暨全國力學會議, 2005.
 91.[B42] 黃昆斌,顏宏益,陳國聲,“化學機械拋光研磨墊之機械性質測試,”中國機械工程學會第二十二屆全國學術研討會,2005.
 92.[B43] 顏宏益,黃奕棠,廖彥鳴,陳延彰,陳國聲,陳元方,“O型環橡膠之機械性質測試與其組成律之建立,”第二十九屆中華民國
  力學學會暨全國力學會議, 2005.
 93.[B44] 葉修銘,陳國聲,“運用細胞自動化理論於化學機械研磨製程模組之建構,”第九屆奈米工程暨微系統技術研討會,2005.
 94.[B45] 王齊中, 楊天祥, 陳國聲, 流體輸送彈性管之波速與振動量測及其生醫應用, 第二十九屆中華民國力學學會暨全國力學會
  議, 2005.
 95.[B46] 歐廣順,陳國聲,“以新型輸入修正法改善射頻微機電接觸式開關之動態性能與壽命,”第九屆奈米工程暨微系統技術研
  討會, 2005.
 96.[B47] Y.-C. Wang, T.-S. Yang, K.-S. Chen, “Effects of Pad Grooves on Slurry Flow in Chemical Mechanical Planarization,” 23rd National
  Conference of the Chinese Society of Mechanical Engineers (November 24–25, 2006, Tainan).
 97.[B48] 陳慕全、王凡家、李仟文、陳國聲、楊天祥,CMP流場測試系統之設計與製作。中國機械工程學會第二十三屆全國學
  術研討會(2006年11月24–25日,台南永康)
 98.[B49] 葉修銘、陳慕全、陳國聲、楊天祥,化學機械研磨製程模組之整合與建立。中國機械工程學會第二十三屆全國學術研
  討會(2006年11月24–25日,台南永康)
 99.[B50] 顏嘉良、陳延彰、陳國聲、楊天祥,化學機械拋光接觸壓力均勻性參數分析。中國機械工程學會第二十三屆全國學術
  研討會(2006年11月24–25日,台南永康)
 100.[B51] 王耀塵、楊天祥、陳國聲,研磨墊溝槽對於化學機械研磨中研磨液雜質濃度與材料移除率的影響。中華民國力學學
  會第三十屆全國力學會議(2006 年12 月15–16 日,彰化)
 101.[B52] 林莞慈,陳敬元,鄭坤銓,陳國聲,楊天祥, 以輸入修正法抑制長距離移動系統之結構振動, 中國機械工程學會第二十三屆
  全國學術研討會(2006年11月24–25日,台南永康)
 102.[B53] 廖彥鳴, 顏宏益, 王凡家, 陳國聲, 化學機械研磨墊之機械性質測試, 中國機械工程學會第二十三屆全國學術研討會
  (2006年11月24–25日,台南永康)
 103.[B54] 鄭坤銓,林莞慈,馮爵敏,戴辰軒,陳國聲, 滑動模態控制於非線性系統之定位減振應用, 中國機械工程學會第二十三屆全
  國學術研討會(2006年11月24–25日,台南永康)
 104.[B55] 顏嘉良,陳延彰,陳國聲,陳元方, "O-Ring Rubber失效分析與最佳化分析," 中華民國力學學會第三十屆全國力學會議
  彰化縣私立大葉大學機械與自動化系95 年12 月15-16 日
 105.[B56] 顏宏益,廖彥鳴, 鄧迪隆, 陳延彰, 黃奕棠, 陳忠貴, 陳國聲, 陳元方, "O 型環橡膠材料之機械性質測試與分析," 中華民國力
  學學會第三十屆全國力學會議彰化縣大葉大學機械與自動化工程學系95 年12 月15-16 日
 106.[B57] 林莞慈、林韋澄、洪裕峰、陳國聲、楊天祥, "以輸入修正法抑制雙自由度長距離移動系統之殘留振動," 中華民國力學
  學會第三十屆全國力學會議彰化縣大葉大學機械與自動化工程學系95 年12 月15-16 日
 107.[B58] 高憲堂、胡逸群、楊天祥、陳國聲, "參數誤差對彈簧質點系統循跡精度之影響," 第三十屆全國力學會議, Dec, 2006 (彰
  化縣大葉大學)
 108.[B59] 胡逸群、楊天祥、陳國聲, "初始條件誤差對天車系統循跡精度之影響," 第三十屆全國力學會議, Dec, 2006 (彰化縣
  大葉大學).
 109.[B60] 葉修銘陳國聲林奕寬,"電子束微影製程模組之發展," 第十屆奈米工程暨微系統技術研討會, Dec. 2006, 新竹工研院
 110.[B59] 葉修銘顏嘉良陳國聲,"化學機械研磨製程模擬模組之發展" 第十一屆奈米工程暨微系統技術研討會,Aug. 2007, 台中中
  興大學
 111.[B61] 顏宏益歐廣順陳國聲, "應用奈米壓痕技術檢測快速熱退火對電漿輔助化學氣相沉積氮化矽薄膜之破壞特性影響," 第十
  一屆奈米工程暨微系統技術研討會,Aug. 2007, 台中中興大學
 112.[B62] 陳國聲, Mechanical Properties Measurement of PECVD Silicon Nitride After Rapid Thermal Annealing Using Nanoindentation
  Technique, 第二屆海峽兩岸實驗力學研討會, Oct.27, 2007 (NCKU, Tainan)
 113.[B63] 林莞慈, 戴辰軒, 陳國聲, 楊天祥, "回授控制於多自由度長距離移動系統之應用與研究," 第三十一屆全國力學會議, Dec,
  2007 (高雄)
 114.[B64] 戴辰軒, 鄧迪隆, 林韋澄, 馮爵敏, 陳國聲, 張祥傑, 陳永裕, "結合加速規與抑制飄移積分電路於速度回授上之應用," 中國
  機械工程學會第二十四屆全國學術研討會(2006年11月24–25日,桃園中壢)
 115.[B65] 王耀塵、楊天祥、陳國聲、顏嘉良, "化學機械研磨製程中多區段晶圓背壓之最佳化參數設定," 第三十一屆全國力學會
  議, Dec, 2007 (高雄)
 116.[B66] 高憲堂、胡逸群、楊天祥、陳國聲, "兩步輸入修正法之殘餘振動分析," 第三十一屆全國力學會議, Dec, 2007 (高雄)
 117.[B67] 廖彥鳴, 吳榮樺, 王凡家, 陳國聲, "PDMS之材料黏彈性質測試", 第三十一屆全國力學會議, Dec, 2007 (高雄)
 118.[B68] 林莞慈, 戴辰軒, 陳國聲, 楊天祥, "回受控制於多自由度長距離移動系統之應用與研究" 第三十一屆全國力學會議, Dec,
  2007 (高雄)
 119.[B69] 林聖傑, 黃信瀚, 陳國聲, 陳一誠, "新型電磁式陣動獵能器之概念設計," 第三十一屆全國力學會議, Dec, 2007 (高雄)
 120.[B70] 歐廣順, 陳延彰, 廖彥鳴, 陳國聲, 謝志男, 張凱傑, 許恭銘, “軟式基材傳輸之材料測試與應力分析,” 中國機械工程學會
  第二十五屆全國學術研討會論文集, 大葉大學, 彰化, 2008.
 121.[B71] 許哲豪, 歐廣順, 郭倩如, 吳政達, 陳國聲, 林仁輝, 林宏彝, 張所鋐, “R2R 奈米壓印製程之成型性與傳輸性參數研究,”
  中國機械工程學會第二十五屆全國學術研討會論文集, 大葉大學, 彰化, 2008.
 122.[B72] 林韋澄, 陳柏維, 陳國聲, “慣性元件訊號漂移之抑制研究,” 中國機械工程學會第二十五屆全國學術研討會論文集, 大
  葉大學, 彰化, 2008.
 123.[B73] 黃信瀚, 陳國聲, “機械式增壓電路應用於壓電獵能器之概念設計與響應分析,” 中華民國力學學會第三十二屆全國力
  學會議, 嘉義, 2008.
 124.[B74] 戴辰軒, 王維志, 陳國聲, 楊天祥, “輸入修正法於天車系統運動之應用研究,” 中國機械工程學會第二十五屆全國學術
  研討會, 彰化, 2008.
 125.[B75] 葉修銘,陳國聲,”化學機械研磨中研磨墊修整製程模擬模組之發展”,2008第六屆全國精密製造研討會(2008/11/8)
 126.[B76] 廖彥鳴,吳秉欣,林奕寬,陳國聲,”PDMS 材料機械性質測試與其在生醫量測之應用”,中國機械工程學會第二
  十五屆全國學術研討會(2008/11/21~11/22)
 127.[B77] 陳均聖、洪裕峰、陳國聲,”三軸磁浮控制平台設計製作與初步控制驗證”,中國機械工程學會第二十五屆全國學
  術研討會論文集, 大葉大學, 彰化, 2008
 128.劉家良、王耀塵、胡逸群、楊天祥、陳國聲(2008) 晶圓扣環對於化學機械平坦化製程中接觸應力均勻度的影響。發表於第
  六屆全國精密製造研討會(台南永康,2008年11月8日)
 129.胡逸群、王耀塵、劉家良、楊天祥、陳國聲(2008) 扣環及晶圓剛性對化學機械平坦化製程中接觸應力均勻度之影響。發表
  於中華民國力學學會第三十二屆全國力學會議(中正大學,2008年11月28–29日
 130.郭蒨如, 歐廣順, 陳延彰, 陳國聲, “Cu/Low-k內連線結構之應力與界面破壞分析,” 中華民國力學學會第三十三屆全國力學會
  議, 苗栗, 2009
 131.林韋澄, 陳柏維, 顧迪, 歐廣順, 陳國聲, “慣性元件抑制訊號飄移方法之研究,”中國機械工程學會第二十六屆全國學術研討
  會, 台南, 2009
 132.Po-Wei Chen, Kuang-Shun Ou, Wei-Cheng Lin, Kuo-Shen Chen, “IR Indoor Localization and Wireless Transmission for Motion Control
  based on Wiimote Technology,” 中國機械工程學會第二十六屆全國學術研討會, 台南, 2009
 133.吳秉欣, 廖彥鳴, 顏宏益, 陳國聲, 黃致凱, “化學機械研磨墊機械性質檢測,” 中國機械工程學會第二十六屆全國學術研討會,
  台南, 2009
 134.王維志, 歐廣順, 陳國聲, “具放大位移單軸壓電微奈米定位平台設計、分析與控制,” 中華民國力學學會第三十三屆全國力
  學會議, 苗栗, 2009
 135.歐廣順, 陳國聲, 楊天祥, 李森墉, “微懸臂樑受殘留應力梯度與靜電力負載之影響研究,” 中華民
  國力學學會第三十三屆全國力學會議, 苗栗, 2009
 136.戴辰軒, 陳韋如, 陳國聲, 楊天祥, 李森墉, “輸入修正法於天車系統運動之振動抑制研與有限元素法結構動態分析,” 中國機
  械工程學會第二十六屆全國學術研討會, 台南, 2009
 137.葉修銘, 陳國聲, “化學機械研磨中研磨墊修整製程模擬模組之發展與應用,” 中國機械工程學會第二十六屆全國學術研討
  會, 台南, 2009
 138.吳秉欣, 林奕寬, 歐廣順, 陳國聲, 江智揚, “磁控濺鍍氮氧化矽薄膜之殘留應力及破壞韌性研究,” 中華民國力學學會第三十
  三屆全國力學會議, 苗栗, 2009
 139.黃信瀚, 陳國聲, “拍擊式壓電獵能器設計與實驗,” 中國機械工程學會第二十六屆全國學術研討會, 台南, 2009
 140.陳韋如, 戴辰軒, 陳國聲, 劉雲輝, “輸入修正法於多振動模態天車系統之振動抑制控制,” 中國機械工程學會第二十七屆全
  國學術研討會, 台北, 2010
 141.顧迪, 歐廣順, 陳柏維, 陳國聲, “Wiimote 紅外線室內定位技術與運用,” 中國機械工程學會第二十七屆全國學術研討會, 台
  北, 2010
 142.陳柏維, 歐廣順, 陳名薪, 陳國聲, “以Wiimote 為基礎之無線感測與智慧控制應用於E-Life 智慧生活之研究,” 中國機械工程
  學會第二十七屆全國學術研討會, 台北, 2010
 143.王維志, 李哲維, 陳國聲, 劉雲輝, “具放大位移單軸壓電微定位平台設計、分析與控制,” 中國機械工程學會第二十七屆全
  國學術研討會, 台北, 2010
 144.傅育德, 歐廣順, 陳國聲, “Wiimote 於液面監控與空間運動定位之設計與實現,” 中國機械工程學會第二十七屆全國學術研
  討會, 台北, 2010
 145.畢家興, 蔡怡芳, 歐廣順, 陳國聲, “應變式智慧型地板設計分析與實驗研究,” 中國機械工程學會第二十七屆全國學術研
  討會, 台北, 2010
 146.江智揚, 陳國聲, “以有限元素分析修正基材效應之壓痕力學轉換模型,” 中國機械工程學會第二十七屆全國學術研討會, 台
  北, 2010
 147.郭蒨如, 歐廣順, 陳國聲, 林琬儒, “裂紋開口形狀對有限元素破壞分析其收斂性之影響,” 中華民國力學學會第三十四屆力
  學會議, 雲林, 2010
 148.王維志, 李哲維, 陳國聲, 劉雲輝, “壓電驅動之撓性定位平台控制系統設計與實驗驗證,” 中華民國力學學會第三十四屆力
  學會議, 雲林, 2010
 149.吳秉欣, 顏宏益, 歐廣順, 江智揚, 陳國聲, “磁控濺鍍與電漿輔助化學氣相沈積氮化矽薄膜材料機械性質檢測及其機械性質
  之比較,” 中華民國力學學會第三十四屆力學會議, 雲林, 2010
 150.蔡富程, 歐廣順, 陳國聲, “電磁致動器驅動撓性結構動態特性,” 中華民國力學學會第三十四屆力學會議, 雲林, 2010
 151.畢家興, 蔡怡芳, 歐廣順, 陳國聲, “應變式一維觸控定位系統設計分析與實驗研究,” 中華民國力學學會第三十四屆力學會
  議, 雲林, 2010
 152.黃致凱, 吳秉欣, 歐廣順, 陳國聲, “電漿輔助化學氣相沉積氮化矽薄膜之破壞與疲勞性質檢測及其在微系統結構可靠度之分
  析與應用,” 第十四屆奈米工程暨微系統技術研討會, 高雄, 2010
 153.江智揚, 陳國聲, “由內能變化探討奈米壓痕基材效應之有限元素分析,” 第十四屆奈米工程暨微系統技術研討會, 高雄, 2010

C.其他著作

 1.“Spring dominated regime design of a High Load Capacity, Electromagnetically Driven X-Y- Stage”, Master Thesis, Department of
  Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, June, 1995.
 2.S. M. Spearing and K-S. Chen, "Power MEMS Materials and Structures," in Tribology Issues and Opportunities in MEMS, Ed. B. Bhusan,
  Kluwer, Amsterdam, 1998 pp 95-107.
 3.“Materials Characterization and Structural Design of Ceramic Micro Turbomachinery”, Ph.D. Thesis, Department of Mechanical Engineering,
  Massachusetts Institute of Technology, Cambridge, MA, Feb. 1999.
 4.“系統階層分析模擬技術”, 微機電系統技術與應用,陳建人主編pp. 1075-1094, 精儀中心出版(2003).
 5."Techniques in Residual Stress Measurement for MEMS and Their Applications," in MEMS/NEMS Handbook: Techniques and Applications,Vol.
  4, Ch. 9, pp. 263-340, Edited by C. T. Leondes, Springer-Verlag, 2006.
 6."MEMS Residual Stress Characterization, Methodology,a nd Perspective" Handbook of Silicon-Based MEMS Materials and Technologies, Ch. 18,
  pp. 305-317, Elsevier, 2010.