Skip to Content

許來興

personal pictures

退休教授
姓名 許來興 (Lai-Hsing Hsu)
組別 兼任教授
教授室 機械系館七樓91706
分機 62273
傳真機 06-2352973
電子信箱 lhhsu@mail.ncku.edu.tw
個人網站 http://www.me.ncku.edu.tw/~geocad805/
學歷
  1. 英國里茲大學 機械 博士(198910 - 1993204 )
  2. 國立成功大學 機械工程研究所碩士(197209 - 197406 )
  3. •國立成功大學 機械工程學系 學士(196809 - 197206 )
經歷
  1. 國立成功大學 副教授 (820801 - )
  2. 國立中山大學 講師 (771001 - 780727)
  3. 台灣塑膠公司 高級專員 (680901 - 770930)
  4. 工業技術研究院 副研究員 (650816 - 680831)
專長
  1. 義肢承筒設計製作
  2. 齒輪製造
  3. 製造程序規畫
教師研究介紹
服務
榮譽
  1. 2007年 2007國家新創獎-學術研究組
  2. 2005年 93年度大專學生參與專題研究計畫研究創作獎(NSC 93-2815-C-006-007-E)
專利
著作

 

(A) 期刊論文
1. L. H. Hsu, F. M. Hsu, Y. L. Chou, L. Y. Hsu, H. Leong, and G. F. Huang, (2001), “An Algorithm to Construct the CAD Model of a Residual Limb”, Biomedical Engineering – Applications, Basis & Communications, Vol. 13, No. 3 pp 149-158.
2. L. H. Hsu, H. W. Au, Y. L. Chou, and G. F Huang, (2001), “Recognition for the Boundary of Pressure-Tolerant and Pressure-Relief Areas on the Scanning Points of Residual Limb”, Biomedical Engineering – Applications, Basis & Communications, Vol. 13, No. 6, pp 276-282.
3. L. H. Hsu, L. Y. Hsu, Y. L. Chou, C. W. Chien and G. F. Huang, (2002), “Automated Shape Modification for the CAD Model of Residual Limb”, Biomedical Engineering –Applications, Basis & Communications, Vol. 14, No. 6, pp. 251-257.
4. P. L. Yang and L. H. Hsu, (2005), “Dimensionless Analysis of Human Lower Limb”, Transactions of the Canadian Society of Mechanical Engineers, Vol. 29, No. 3, pp 423 to 440.
5. L. H. Hsu and S. Y. Chen, (2006), “A case-based shape conceptualization system for supporting creative product design”, Journal of Engineering Design, Vol. 17, No. 1, January 2006, pp 17–33.
6. Hsin-I Wu, Lai-Hsing Hsu, (2007), “An Alternative Algorithm for Constructing Smooth B-Spline Closed Curves”, accepted by the Transactions of Chinese Society of Mechanical Engineers, Vol.28, No.3, pp.301~306.
7. L. H. Hsu, G. F. Huang, C. T. Lu, Y. M. Chen, I. C. Yu, and H. S. Shih, (2008), “The Application of Rapid Prototyping for the Design and Manufacturing of Transtibial Prosthetic Socket,” Advanced Manufacturing 2007, Materials Science Forum, Vol. 594, pp 273-280.
8. Hsu, L. H., G. F. Huang, C. T. Lu, D. Y. Hong, & S. H. Liu, (2010), “The development of a rapid prototyping prosthetic socket coated with a resin layer for transtibial amputees,” Prosthetics and Orthotics International, Vol. 34, No. 1, Pages 37-45.
9. W.-C. Chuang, H.-H. Hsieh, L.-H. Hsu, H.-J. Ho, J.-T. Chen, M.-J. Tzeng, (2011), “A System for Supporting the Design of Total Surface Bearing Transtibial Sockets,” Computer-Aided Design and Applications, Vol. 8, No. 5, pp 723-734.

(B)研討會論文
1. L. H. Hsu, K. C. Hsu, K. H. Wu and S. H. Yue, (2001), “Construction of the R-S-N Curves for Surface Durability of Carburized Gear Material Using Non-Linear Parametric Models”, Proceedings of the JSME International Conference on Motion and Power Transmission, Volumn I, pp 217-222, MPT2001-Fukuoka, November 15-17, Fukuoka, Japan.
2. 楊沛霖 許來興, (2001), “正齒輪滾滑動特性與齒面疲勞試驗模型之比較”,中國機械工程學會第十八屆學術研討會, 第三冊 固力與設計, pp 679-686.
3. 余忠道, 許來興, (2001), “非線性迴歸方式建立S-N曲線之研究”,中國機械工程學會第十八屆學術研討會, 第三冊, 固力與設計, pp 495-501.
4. 許茹宜, 許來興, 周有禮, (2002), “殘肢CAD曲面模型之形狀變更”,中國機械工程學會第19屆學術研討會.
5. 熊大鈞, 許來興, (2002), “曲面偏置方法應用於殘肢受壓區與非受壓區之形狀修改”, 中國機工程學會第19屆學術研討會.
6. 何清龍, 許來興, (2002), “殘肢曲面模型形狀變更對介面應力之影響”,中國機工程學會第19屆學術研討會.
7. 朱晏樟, 許來興, (2003), “創新設計之功能模型分析研究”, 中國機工程學會第20屆學術研討會.
8. 黃健, 許來興, (2003), “拘束邊界之曲面多樣化編修應用於義肢承筒數位化設計”, 中國機工程學會第20屆學術研討會.
9. 吳維義, 許來興, (2004), “擺動式齒輪減速機的機構分析”, 華民國機構與機器原理學會, 第7屆機構與機器設計學術研討會.
10. 江嘉仁, 許來興, (2004), “塑膠零件之CAD模型脫模性分析”, C0900369, 中國機械工程學會第21屆全國學術研討會,高雄,台灣。
11. 楊沛霖, 許來興, 黃國峯, 林罡生, 石旭生, (2004), “膝下截肢者之殘肢三維模型建立與介面應力分析”, E0800370, 中國機械工程學會第21屆全國學術研討會,高雄,台灣。
12. 陳世軸, 許來興, (2004), “應用TRIZ方法與資料庫輔助手工具創新設計”, C1301246, 中國機械工程學會第21屆全國學術研討會,高雄,台灣。
13. P. L. Yang, L. H. Hsu, G. F. Huang, H. S. Shih, G. S. Lin, (2004), “Comparison of computational analysis and experimental measurement for the interface stresses between BK stump and prosthetic socket,” Biomedical Engineering Society, 2004 Annual Symposium, Tainan, Taiwan.
14. P. L. Yang, L. H. Hsu, G. F. Huang, H. S. Shih, G. S. Lin, (2004), “Pressure Analysis on the Pressure Tolerant and Pressure Relief Areas of BK Residual Limbs,” 2004台灣生物力學學會學術研討會,台北,台灣。
15. 黃國峰, 石旭生, 周有禮, 周伯禧, 許來興, 楊沛霖, 林罡生, (2004), “Foot Pressure and Gait Analysis in Different Speeds on Transtibial Amputee”, 2004生物力學學會學術研討會,台北,台灣。
16. 林罡生, 許來興, 楊沛霖, ,黃國峯,石旭生,蕭世祥, (2005), “膝下殘肢與義肢承筒在不同行走速度下之介面壓力分析”, E8-005,中國機械工程學會第 22 屆全國學術研討會, 中壢,台灣。
17. 陳世昇, 許來興, 余亦昌, (2005), “應用CAD軟體API建立設計概念具體化輔助系統”, C9-001,中國機械工程學會第 22 屆全國學術研討會,中壢,台灣。
18. 謝東昇, 許來興, 陳彥名, (2005), “應用功能分析與型態學圖表法建立螺絲起子概念設計輔助系統”, C9-002,中國機械工程學會第 22 屆全國學術研討會,中壢,台灣。
19. P. L. Yang, L. H. Hsu, G. F. Huang, G. S. Lin, H. S. Shih and C.H. Chang, (2005), “The Influence of Modification on Pressure Tolerance/Relief Areas of Below-Knee Amputee”, Tracking ID: 143200, Program ID: 0104, BMES2005, 2005 Annual Fall Meeting, September 28 - October 1, Baltimore, U.S.A. (NSC 93-2212-E-006-079)
20. P. L. Yang, L. H. Hsu, G. F. Huang, G. S. Lin, H. S. Shih and C.H. Chang, (2005), “Using Taguchi Method in Aiding Shape Design of Below-Knee Prosthetic Socket”, Paper ID: 10130, APB2005 Asia-Pacific Biomechanics Conference, November 22-24, Taipei, Taiwan.
21. P. L. Yang, L. H. Hsu, G. F. Huang, G. S. Lin, H. S. Shih and C.H. Chang, (2005), "Interface Pressure Between BK Residual Limb and Prosthetic Socket at Three Different Walking Speeds”, UIC: b0046036, SBC 2005 Summer Bioengineering Conference, June 22-26, Vail, Colorado, U.S.A. (NSC 93-2212-E-006-079)
22. Hsu, L. H., Yang, P. L., Huang, G. F., and Shih, H. S., (2006), “Verification of Interface Pressures between Prosthetic Socket and Stump of Below-Knee Amputee at Stance Phase,” Paper ID:4874, 5th World Congress of Biomechanics, July 29 – Aug. 4, Munich, German.
23. 蕭世祥、許來興、黃國峯、楊沛霖、洪大祐、石旭生,(2006),擬靜態有線元素模型分析膝下殘肢與義肢承筒之介面壓力,E8-011,中國機械工程學會第二十三屆全國學術研討會論文集,November 24-25,台南,台灣。
24. 余奕昌,陳彥名,許來興,黃國峯、楊沛霖,石旭生,(2006),應用CAD軟體API輔助膝下殘肢曲面之建模與編修,C9-011,中國機械工程學會第二十三屆全國學術研討會論文集,November 24-25,台南,台灣。
25. 陳彥名,余奕昌,許來興,黃國峯、楊沛霖,石旭生,(2006),應用CAD軟體API與快速成型技術製作義肢承筒,C9-012,中國機械工程學會第二十三屆全國學術研討會論文集,November 24-25,台南,台灣。
26 Hsu, LH, Huang, GF, Chen, YM, Yu, IC, Yang, PL, Shiou, SC and Shih, HS, (2006), An Automated Design and Manufacturing System for Transtibial Prosthetic Socket, accepted by 2006 Taiwan Society of Biomechanics Conference.
27. Hsu, LH, Huang, GF, Lu, CT, Chen, YM, Yu, IC, and Shih, HS, (2007), The Integration of CAD API Environment and RP Technology for Supporting the Design and Manufacturing of Transtibial Prosthetic Socket, Paper ID 837, International Society of Biomechanics XXI, July 1-5, 2007, Taipei, Taiwan.
28. Hsu, LH, Huang, GF, Lu, CT, Chen, YM, Yu, IC, and Shih, HS, (2007), An Interface System to Support the Production of Prosthetic Socket, Third Asian Pacific Conference on Biomechanics, #059, November 5 - 8, 2007, Tokyo, Japan.
29. Hsu, LH, Huang, GF, Lu, CT, Chen, YM, Yu, IC, and Shih, HS, (2007), The Application of Rapid Prototyping for the Design and Manufacturing of Transtibial Prosthetic Socket, International Conference on Advanced Manufacturing Technology, November 26-30, 2007, Tainan, Taiwan.
30. 劉書豪、許來興、黃國峯,無控制點的內插函數應用於殘肢曲面模型編修,(2007)中國機械工程學會第 22 屆全國學術研討會,D06-0010,November 23-24,中壢,台灣。
31. 許來興、黃國峰、呂權庭、洪大祐、彭勳昆、石旭生,2007,外層包覆樹脂之快速成型膝下義肢承筒,台灣生物力學研討會,成功大學,台南。
32. C.T. Lu, L.H. Hsu, G. F. Huang, C.W. Lai, H.K. Peng, and T.Y. Hong, (2008), “The Development and Strength Reinforcement of Rapid Prototyping Prosthetic Socket Coated with a Resin Layer for Transtibial Amputee,” Paper ID: conf131a972, ICBME 2008, December 2-5, Singapore.
33. C-W, Lai, L-H, Hsu, G-F, Huang, S-H, Liu , 2008, “An Interface System to Aid The Design of Rapid Prototyping Prosthetic Socket Coated with A Resin Layer for Transtibial Amputee,” Paper ID: conf131a415, ICBME 2008, December 2-5, Singapore.
34. H.K, Peng, L.H. Hsu, G.F. Huang and D.Y. Hong, 2008, “The Analysis and Measurement of Interface Pressures between Stump and Rapid Prosthetic Socket Coated with A Resin Layer for Transtibial Amputee,” Paper ID: conf131a435, ICBME 2008, December 2-5, Singapore.
35. Wei-Chiao Chuang, Lai-Hsing Hsu, Gwo-Feng Huang, Chih-Wei Lai, (2009), “Computer-Aided Grid-Editing System For Supporting The Design of Rapid Prototyping Transtibial Sockets,” ASME 2009 International Mechanical Engineering Congress & Exposition (IMECE2009), IMECE2009-10758, November 13-19 2009, Florida.
36. Yen-Ting Chen, H.K. Peng, C.T. Lu, L.H. Hsu, G.F. Huang, H.S. Shih, (2009),“The Gait Analysis and Interface Pressure Measurement between Stump and Resin-reinforced Rapid Prototyping Transtibial Socket,” ASME 2009 International Mechanical Engineering Congress & Exposition (IMECE2009), IMECE2009-11031, November 13-19 2009, Lake Buena Vista, Florida.
37. Huai-Sheng Yang, Lai-Hsing Hsu1, Kuo-Feng Huang, Chieh-Teng Chi, Hao-Chin Chang, (2009),“The Application of Vacuum Casting System For Simplifying the Design of Transtibial Sockets,” ASME 2009 International Mechanical Engineering Congress & Exposition (IMECE2009), IMECE2009-10835, November 13-19 2009, Florida.
38. 謝旭豪、賴志暐、許來興、石旭生、黃國峯、陳若佟,(2009),“膝下義肢承筒形狀設計之介面系統,中國機械工程學會第二十六屆全國學術研討會論文集,E13-006,November 20-21 2009,成功大學,台南。
39. 彭勛昆、賴昆宏、許來興、黃國峯、石旭生、陳若佟,(2009),“膝下樹脂強化快速原型承筒與殘肢的介面壓力及步態分析”,中國機械工程學會第二十六屆全國學術研討會論文集,E08-016,November 20-21 2009,成功大學,台南。
40. L.H. Hsu, C.T. Lu, G.F. Huang, J.T.Chen, W.C. Chuang, H.S. Shih, (2010), “Introduction to a Type of Resin-reinforced Rapid Prototyping Transtibial Socket,” Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010, July 12-14, 2010, Istanbul, Turkey, ESDA2010-24155.
41. L.H. Hsu, C.T. Lu, G.F. Huang, J.T. Chen, H.S. Yang, H.S. Shih, (2010), “Investigation into the Flexural Strength of a Strength of a Material for Resin-reinforced Rapid Prototyping Transtibial Socket,” Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2010, August 15-18, 2010, Montreal, Quebec, Canada, DETC2010-28176.
42. 陳彥廷、許來興、陳若佟、何浩然、賴昆宏、石旭生,(2010),“單側膝下義肢使用者承筒負重之步態分析研究”,2010年台灣生物力學學會及台灣運動生物力學學會聯合年會暨學術研討會,2010 /10/29-30,成功大學。
43. 紀傑騰、許來興、陳若佟、何浩然、程大維、石旭生,(2010),“真空成形殘肢模型於膝下義肢承筒之設計與製作” ,2010年台灣生物力學學會及台灣運動生物力學學會聯合年會暨學術研討會,論文編號:81,2010 /10/29-30,成功大學。
44. 楊懷生、許來興、何浩然,(2010),“包覆樹脂強化層之快速成型材料彎曲強度之研究”,中華民國力學學會第三十四屆全國力學會議,J0031,2010/11/19-20,雲林科技大學。
45. 劉風源,(2010),應用SolidWorks整合膝下義肢承筒建模與有限元素分析,成功大學機械系, 碩士論文。
46. 莊惟喬、謝旭豪、許來興、陳若佟、何浩然,(2010),“全接觸式快速原型膝下義肢承筒網格化設計系統”, 中國機械工程學會第二十七屆全國學術研討會,EE09-008,2010/12/10-11,台北科技大學。
47. Wei-Chiao Chuang, Hsu-Hao Hsieh, Lai-Hsing Hsu , Hao-Juan Ho, Jo Tong Chen, and Ming-Jie Tzeng, (2011), “A System for Supporting the Design of Total Surface Bearing Transtibial Sockets”, accepted by CAD 2011, Taipei, Paper ID: 46.
48. L. H. Hsu, M. J. Tzeng, and J. T. Chen, (2011), “A Simplified Integration System for the Fabrication of Total Surface Bearing Transtibial Socket by Employing Rapid Prototyping Technology”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, DETC2011-48877.
49. W.-C. Chuang, H.-H. Hsieh, L.-H. Hsu, H.-J. Ho, J.-T. Chen, M.-J. Tzeng, (2011), “A System for Supporting the Design of Total Surface Bearing Transtibial Sockets,” Computer-Aided Design and Applications, Vol. 8, No. 5, pp 723-734.
50. 賴昆宏、許來興、張世薪、曾明基、何浩然、陳若佟,(2011),“全接觸式小腿義肢承筒之有限元素分析與實驗評估”,中國機械工程學會第二十八屆全國學術研討會”,E07-012,2011/12/10-11,中興大學。
52. 謝旭豪、許來興、程大維、廖紹宇、曾明基、陳若佟、何浩然,(2011),“電腦輔助設計在全接觸式小腿義肢承筒之應用”,中國機械工程學會第二十八屆全國學術研討會”,C08-025,2011/12/10-11,中興大學。