Skip to Content

褚晴暉

personal pictures

兼任教授
姓名 褚晴暉 (Ching-Hwei Chue)
組別 兼任教授
教授室 機械系館七樓91716
分機 62165
傳真機 06-2352973
電子信箱 chchue@mail.ncku.edu.tw
個人網站
學歷
經歷
專長
  1. 破壞力學
  2. 軌道力學
  3. 有限元素法
  4. 骨骼力學
  5. 非均勻材料破壞力學
教師研究介紹
服務
榮譽
專利
著作

A. Journal Paper

  1. G. C. Sih and C. H. Chue, “Stability and Integrity of Mechanical Joint in Flight Vehicles: Local and Global Energy Density”, Theoretical and Applied Fracture Mechanics, Vol. 10, pp. 135-149, 1988. - 通訊作者,SCI
  2. C. H. Chue and Y. D. Wei, “Failure Initiation Sites and Instability of Structural Components with Localized Energy Density”, Theoretical and Applied Fracture Mechanics, Vol. 15, pp. 163-177, 1991. - 通訊作者,SCI
  3. C. H. Chue, and C. H. Chang, “The Asymmetric Crack Propagation of a Straight Edge Crack in a Shaft under Rotary Bending”, Journal of the Chinese Society of Mechanical Engineers, Research note, Vol. 14, No. 2, pp. 214-218, 1993. - 通訊作者,EI
  4. C. H. Chue and Y. H. Chang, “Bonded Repair of Cracked Holes under Biaxial Loading”, Journal of the Chinese Society of Mechanical Engineers, Vol. 14, No. 2, pp. 164-170, 1993. - 通訊作者,EI
  5. C. H. Chue and C. J. Hwang, “The failure analysis of cylindrical shell with arbitrarily oriented through cracks”, Computers & Structures, Vol. 46, No. 2, pp. 371-379, 1993. - 通訊作者,SCI
  6. C. H. Chue, M. L. Wu and C. H. Chang, “Shearing Effects on a Shaft with Circular Surface Crack under Rotary Bending”, Engineering Fracture Mechanics, Vol. 45, No. 4, pp. 479-486, 1993. - 通訊作者,SCI
  7. C. H. Chue, L. A. Lin and S. C. Wang, “Optimum Selection of Ply Orientation in Bonded Repair under Biaxial Loading”, Engineering Fracture Mechanics, Vol. 48, No. 1, pp. 91-101, 1994. - 通訊作者,SCI
  8. C. H. Chue and S. C. Wang, "Application of Bonded Patch and Sleeve on Cracked Holes under Biaxial Load", Engineering Fracture Mechanics, Vol. 48, No. 4, pp. 515-522, 1994. - 通訊作者,SCI
  9. C. H. Chue, L. C. Chang and J. S. Tsai, “Bonded Repair of a Plate with Inclined Central Crack under Biaxial Loading”, Composite Structures, Vol. 28, pp. 39-45, 1994. - 通訊作者,SCI
  10. 褚晴暉,陳貴文,蔡建興,王文樑,銲接殘留應力之研究【二】,銲接與切割,Vol. 4, No. 6, pp. 1-13, 1994.
  11. 褚晴暉,陳貴文,蔡建興,王文樑,銲接殘留應力之研究【一】,銲接與切割,Vol. 4, No. 5, pp. 1-9, 1994.
  12. C. H. Chue, R. L. Hwang and C. Y. Shyu, “Contact Velocity Effects on Failure Analysis of Axisymmetric Contact Problem”, Journal of the Chinese Society of Mechanical Engineers, Vol. 16, No. 3, pp. 239-244, 1995. - 通訊作者,EI
  13. C. H. Chue, and T. J. Liu, “The Effects of Laminated Composite Patch with Different Stacking Sequences on Bonded Repair”, Composite Engineering, Vol. 5, No. 2, pp. 223-230, 1995. - 通訊作者,SCI
  14. C. H. Chue, C. Y. Shyu, Y. L. Yang, C. H. Chang, K. H. Tasi and R. M. Lin, “Three-dimensional Stress Analysis of Cementless Total Hip Prosthesis”, Journal of Orthopedic Surgery, ROC, 12:pp. 288-297, 1995.
  15. C. H. Chue, W. C. Chou and T. J. Liu, “The effects of Si ze and Stacking Sequence of Composite Laminated Patch on Bonded Repair for Cracked Hole”, Applied Composite Materials, Vol 3, pp. 355-367, 1996. - 通訊作者,SCI
  16. Kwang-Lung Lin, Ching-Hwei Chue and Buo-Ching Kou, “Deformation and Corrosion of Hot Dip Galvanized Coatings”, Materials Chemistry and Physics, Vol. 50, pp. 82-87, 1997. – SCI
  17. C. H. Chue and T. J. Liu, “The Frictional Effects of Contact Surfaces on Fracture Behaviors of Vertical Surface Cracks in Rails”, Journal of the Chinese Society of Mechanical Engineers, Vol. 18, No. 6, pp. 633-543, 1997. - 通訊作者,EI
  18. C. H. Chue, S. P. Ho, and J. S. Horng, “Three Dimensional Finite Element Analysis of Welded Pipes Using Automatic Rezoning Techniques”, Journal of the Chinese Society of Mechanical Engineers, Vol. 20, No. 5, pp. 457-465, 1999. - 通訊作者,EI
  19. C. H. Chue and T. J. Liu, “Fracture Analysis of Inclined Surface cracks in Rail under Rolling Contact Loading”, Journal of the Chinese Society of Mechanical Engineers, Vol. 20, No. 2, pp. 147-158, 1999. - 通訊作者,EI
  20. C. H. Chue and H. H. Chung, “Pitting Formation under Rolling Contact”, Theoretical and Applied Fracture Mechanics, Vol. 34, pp. 1-9, 2000. - 通訊作者,SCI
  21. C. H. Chue, C. H. Tseng, and C. I. Liu, “On Stress Singularities in an Anisotropic Wedge for Various Boundary Conditions”, Composite Structures, Vol. 54, pp. 87-102, 2001. - 通訊作者,SCI
  22. C. H. Chue and C. I. Liu, “A General Solution on Stress Singularities in Anisotropic Wedge”, International Journal of Solids and Structures, Vol. 38, pp. 6889-6906, 2001. - 通訊作者,SCI
  23. C. H. Chue and P. C. Chiou, “The Study of Bonded Repair technology on Cracked Composite Structure under Biaxial Loading”, Journal of the Chinese Society of Mechanical Engineers, Vol. 22, No. 3, pp. 209-216, 2001. - 通訊作者,EI
  24. C. H. Chue, H. H. Chung, J. F. Lin, C. C. Chou, “The Effect of Strain Hardened Layer on Pitting Formation During Rolling Contact”, Wear, Vol. 249/1-2, pp. 108-115, 2001. - 通訊作者,SCI
  25. C. H. Chue, Teng-Hui Chen, and Hwa-Teng Lee, “A General Solution on Stress Singularities in the Junction of Two Anisotropic Materials”, Composite Structures, Vol. 55, pp. 81-93, 2002. - 通訊作者,SCI
  26. C. H. Chue and C. I. Liu, “Disappearance of Free-Edge Stress Singularity in Composite Laminates”, Composite Structures, Vol. 56, pp. 111-129, 2002. - 通訊作者,SCI
  27. C. H. Chue and C. D. Chen, "Decoupled Formulation of Piezoelectric Elasticity Under Generalized Deformation and its Application to Wedge Problems", International Journal of Solids and Structures, Vol. 39, pp. 3131-3158, 2002. - 通訊作者,SCI
  28. C. H. Chue and C. I. Liu, "Stress Singularities in a Bimaterial Anisotropic Wedge with Arbitrary Fiber Orientation", Composite Structure, Vol. 58, pp. 49-56, 2002.
  29. C. H. Chue and S. M. Wang, "Stress Singularities in Anisotropic Three-Material Wedges and Junctions with Applications", Composite Structures, Vol. 58, pp. 443-456, 2002. - 通訊作者,SCI
  30. C. H. Chue, Teng-Hui Chen, and Hwa-Teng Lee, “Effect of Stiffness and Thickness Ratios on Popcorn Cracking in IC Packages”, IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 2, June, pp. 340-348, 2003. - 通訊作者,SCI
  31. C. D. Chen and C. H. Chue, “Singular Stresses near Apex of Wedge by Finite Element Analysis”, Journal of the Chinese Institute of Engineers, Vol. 26, No. 4, pp. 423-434, 2003. - 通訊作者,SCI
  32. C. H. Chue and C. D. Chen, “Antiplane Stress Singularity of a Bimaterial Bonded Piezoelectric Wedge”, Archive of Applied Mechanics Vol. 72, pp. 673-685, 2003. - 通訊作者,SCI
  33. C. D. Chen and C. H. Chue, “Fracture mechanics analysis of a composite piezoelectric strip with an internal semi-infinite electrode”, Theoretical and Applied Fracture Mechanics 39, pp. 291-314, 2003. - 通訊作者,SCI
  34. C. D. Chen and C. H. Chue, “Singular electro-mechanical fields near the apex of a piezoelectric bonded wedge under antiplane shear”, International Journal of Solids and Structures, 40, pp. 6513-6526, 2003. - 通訊作者,SCI
  35. C. H. Chue, Y. L. Ou and T. Y. Wong “Stress singularity analysis in restorations of premolar class II cavities”, J. of the Chinese Institute of Engineers, Vol. 26, No. 6, pp. 747-756, 2003. - 通訊作者,SCI
  36. C. H. Chue, W. B. Wei, and T. J. Liu, “The antiplane electro-mechanical field of a piezoelectric wedge under a pair of concentrated forces and free charges”, J. of the Chinese Institute of Engineers, Vol. 26, No. 5, pp. 575-583, 2003. - 通訊作者,SCI
  37. Chi-Wei Lo, Shou-I Chen, Ching-Hwei Chue, Ruey-Mo Lin, “Influences of osteoporosis and disc degeneration on lumbar spinal stability”, J. of the Chinese Institute of Engineers, Vol. 26, No. 6, pp. 757-769, 2003. - SCI
  38. S. M. Weng and C. H. Chue, “The stress singularities at the apex of composite piezoelectric junctions”, Archive of Applied Mechanics, Vol. 73, pp. 638-649, 2004.  - 通訊作者,SCI
  39. C. H. Chue and T. J. Liu, “Electro-elastic analysis of a bimaterial piezoelectric wedge with an interface crack under antiplane concentrated forces and inplane surface charges”, International Journal of Solids and Structures, Vol. 41, pp. 4179-4196, 2004. - 通訊作者,SCI
  40. C. H. Chue, and Wei-Ju Liu, “Comments on ”Analysis of an isotropic finite wedge under antiplane deformation””, International Journal of Solids and Structures, Vol. 41, pp. 5023-5024, 2004. - 通訊作者,SCI
  41. Teng-Hui Chen, C. H. Chue, and Hwa-Teng Lee, “Stress singularities near the apex of a cylindrically polarized piezoelectric wedge”, Archive of Applied Mechanics, 74, pp. 248-261, 2004. - 通訊作者,SCI
  42. C. H. Chue, and Wei-Ju Liu, “Anti-plane electro-mechanical field of a piezoelectric finite wedge under a pair of concentrated forces and free charges”, J. of the Chinese Institute of Engineers, Vol. 27, No. 6, pp. 839-848, 2004. - 通訊作者,SCI
  43. C. H. Chue, and Y. L. Ou, “Mode III crack problems for two Bonded functionally graded piezoelectric materials”, International Journal of Solids and Structures, Vol. 42, Vol. 3321-3337, 2005. - 通訊作者,SCI
  44. C. H. Chue, and S. M. Weng “Fracture analysis of piezoelectric materials with an arbitrarily oriented crack using energy density theory”, Computers and Structures, Vol. 83, pp. 1251-1265, 2005. - 通訊作者,SCI
  45. C. H. Chue and T. J. Liu, “Magneto-electro-elastic antiplane analysis of a bimaterial BaTiO3-CoFe2O4 composite wedge with an interface crack”, Theoretical and Applied Fracture Mechanics, Vol. 44, pp. 275-296, 2005. - 通訊作者,SCI
  46. T. J. Liu, and C. H. Chue, “On the singularities in a bimaterial magneto-electro-elastic composite wedge under antiplane deformation”, Composite Structures, Vol. 72, pp. 254-265, 2006. - 通訊作者,SCI
  47. Y. L. Ou and C. H. Chue, “Analysis of antiplane field of a nonhomogeneous elastic wedge”, J. of the Chinese Institute of Engineers, Vol. 29, No. 1, pp. 125-133, 2006. - 通訊作者,SCI
  48. C. I. Liu, and C. H. Chue, “On the stress singularity of dissimilar anisotropic wedges and junctions in antiplane shear”, Composite Structures, Vol. 73, pp. 432-442, 2006. - 通訊作者,SCI
  49. Y. L. Ou and C. H. Chue, “Two mode III cracks in two bonded functionally graded piezoelectric half planes respectively”, Archive of Applied Mechanics, vol. 75, pp. 364-378, 2006. - 通訊作者,SCI
  50. C. H. Chue, W. B. Wei and T. J. Liu, “Antiplane electro-mechanical field of a bimaterial piezoelectric wedge under a pair of concentrated forces and surface charges”, J. of the Chinese Institute of Engineers, Vol. 29, pp. 467-480, 2006. - 通訊作者,SCI
  51. Y. L. Ou and C. H. Chue, “Mode III eccentric crack in a functionally graded piezoelectric strip”, International Journal of Solids and Structures, Vol. 43, pp. 6148-6164, 2006. - 通訊作者,SCI
  52. C. H. Chue, T. J. C. Liu, and C. D. Chen, “ Discussions of antiplane singularities of piezoelectric-dielectric and piezoelectric-conductor wedges”, Archive of Applied Mechanics, Technical Note, Vol. 76, pp. 245-248, 2006. - 通訊作者,SCI
  53. C. I. Liu, and C. H. Chue, “Disappearance conditions of stress singularities for anisotropic bimaterial half-plane wedges under antiplane shear”, Transaction ASME, Journal of Applied Mechanics, Vol. 74, pp. 1-7, 2007. - 通訊作者,SCI
  54. C.H. Chue, and Wei-Ju Liu, “Antiplane electro-mechanical field of a piezoelectric finite wedge under shear loading and at fixed-grounded boundary conditions”, International Journal of Solids and Structures, Vol. 44, pp. 2540-2552, 2007. - 通訊作者,SCI
  55. Wei-Ju Liu and C.H. Chue, Electroelastic analysis of a piezoelectric finite wedge with mixed type boundary conditions under a pair of concentrated shear forces and free charges”, Theoretical and Applied Fracture Mechanics, Vol. 48, pp. 203-224, 2007. - 通訊作者,SCI
  56. C.H. Chue and Wei-Hung Hsu, “Antiplane problem of an internal crack normal to the interface of two bonded functionally graded piezoelectric/piezomagnetic materials”, J. of the Chinese Institute of Engineers, Vol. 31, No. 1, pp. 53-69, 2008. - 通訊作者,SCI
  57. C.H. Chue and Wei-Hung Hsu, “Antiplane internal crack normal to the edge of a functionally graded piezoelectric/piezomagnetic half plane”, MECCANICA, Vol. 43, pp. 307-325, 2008. - 通訊作者,SCI
  58. C.H. Chue, W. J. Liu, S. M. Weng, and T. Y Wong, “Effects of Enamel Anisotropy on Stress Singularities in Restorations of Premolar Class II Cavities”, J. of the Chinese Institute of Engineers, Vol. 31, No. 3, pp. 403-415, 2008. - 通訊作者,SCI
  59. Wei-Hung Hsu and C.H. Chue, “Mode III fracture problem of an arbitrarily oriented crack in an FGPM strip bonded to an FGPM half plane”, International Journal of Solids and Structures, Vol. 45, pp. 6333-6346, 2008. - 通訊作者,SCI
  60. C. H. Chue and Y. J. Chen, “Mode III Crack Problems of Two Bonded Functionally Graded Strips”, International Journal of Solids & Structures, Vol. 46, 331-343, 2009. 通訊作者,SCI
  61. Wei-Hung Hsu, Ching-Hwei Chue, “Mode III fracture problem of an arbitrarily oriented crack in an FGPM strip bonded to a homogeneous piezoelectric half plane”, MECCANICA, Vol.44, No. 5, 2009 - 通訊作者,SCI..
  62. C.H. Chue and Wei-Hung Hsu, “Mode III Arbitrarily Oriented Crack inan FGPM Medium”, J. of the Chinese Institute of Engineers, Journal of the Chinese Institute of Engineers, Vol. 32, No. 3, pp. 383-389, 2009. - 通訊作者,SCI
  63. Y. J. Chen and C. H. Chue, “Mode III Fracture Problems of a Cracked FGPM Surface Layer Bonded to a Cracked FGPM Substrate”, Archive of Applied Mechanics, Vol. 80, pp. 285-305, 2010. - 通訊作者,SCI
  64. C. H. Chue, C. N. Yeh, “Mode Ⅲ crack problem of two bonded functionally graded piezoelectric material strips”, Theoretical and Applied Fracture Mechanics, Vol. 53, No. 3, pp. 233-250, June 2010. - 通訊作者,SCI
  65. C. H. Chue, C. N. Yeh, “Mode III fracture problem of two arbitrarily oriented cracks located within two bonded functionally graded material strips”, MECCANICA, Vol. 46, pp. 447-469, 2010. - 通訊作者,SCI

B. Conference Paper

  1. 褚晴暉, 魏宇德, 1989. 具有缺陷結構元件之破損分析. 中國機械工程學會第六屆學術研討會.
  2. Chue, C.H., Hwang, C.J., 1991. Analysis of cylindrical shell with through cracks.中華民國力學學會第15屆全國力學會議, 台灣台南.
  3. Chue, C.H., Chang, L.C., Tsai, J.S., 1992. Bonded repair of a plate with inclined central crack under biaxial loading. 中國機械工程學會第九屆學術研討會, 台灣高雄.
  4. 李驊登, 褚晴暉, 郭聰源, 薛淦浩, 陳中城, 1993. 2024鋁合金破壞試驗之熱機效應研究. 中國機械工程學會第十屆學術研討會.
  5. Chue, C.H., Hwang, C.J., 1993. The failure analysis of cylindrical shell with arbitrarily oriented through cracks. The Third Pan American Congress of Applied Mechanics, Sao Paulo, Brazil, January, 1993.
  6. Chue, C.H., Tsai, J.S., 1993. Bonded repair of a plate with inclined central crack under biaxial loading. International Conference on Advanced Composites, Wollongong, Australia, February, 1993.
  7. Chue, C.H., Shyu, C.Y., Yang, Y.L., Tsai, K.H., Lin, R.M., 1994. Three dimensional stress analysis of uncemented total hip prostheses. 中華民國骨科學會研討會, 台大醫學院, 台灣台北.
  8. Chue, C.H., Yang, Y.L., Tsai, K.H., Lin, R.M., 1994. Three dimensional finite element analysis of stress in cementless total hip replacement. 中華民國骨科學會八十三年年會, 台灣台北.
  9. Chue, C.H., Wang, S.C., 1994. Optimum ply orientation in bonded repair of cracked fastener hole under biaxial loading. International Conference on Composite Engineering, New Orleans, Louisiana, U.S.A.
  10. 褚晴暉, 邱柏青, 1994. 黏著修補技術之補片最佳設計. 1994 MARC Taiwan Users Meeting.
  11. 褚晴暉, 徐崇元, 1994. 接觸速率對壓痕破壞之影響分析. 1994 MARC Taiwan Users Meeting.
  12. 褚晴暉, 邱柏青, 1995. 含裂縫複合材料平板之黏著修補研究. 1995 MARC Taiwan Users Meeting.
  13. 褚晴暉, 楊宜霖, 1995. 人工髖關節置換術後之三維有限元素應力分析. 1995 MARC Taiwan Users Meeting.
  14. Chue, C.H., Chiou, P.C., 1995. The study of bonded repair technology on cracked composite structure under biaxial loading. The Tenth International Conference on Composite Materials Society (ICCM-10), Whistler, Canada.
  15. Chue, C.H., Chang, S.C., Ho, P.H., Lin, R.M., 1997. The changes of stress distribution among different medical curves of femoral stem in finite element analysis. 中華民國骨科研究學會﹑中華民國生物力學學會聯合年會暨學術討論會.
  16. Chue, C.H., Lin, R.M., Chang, S.C., Ho, P.H., 1999. Study of some stem geometric design parameters in cementless total hip prostheses. Tenth World Congress on the Theory of Machine and Mechanisms, University of Oulu, Finland, June 20-24, 1999.
  17. 褚晴暉, 陳騰輝, 陳重德, 1999. IC封裝受機械負載之破裂研究. 中華民國力學學會第23屆全國力學會議.
  18. Chue, C.H., Liu, C.I, 2000. A general solution on stress singularities in anisotropic wedge. ICEE/7, Denver, Colorado, July 2-8, 2000.
  19. 褚晴暉, 劉全益, 2000. 非等性楔形結構之應力奇異性分析.中華民國第六屆破壞科學研討會.
  20. Chue, C.H., Chen, T.H., Lee, H.T., 2001. A general solution of stress singularities in the bonded anisotropic bimaterial junction. The Fourth Pacific International Conference on Aerospace Science and Technology (PICAST4), Kaohsiung, Taiwan, ROC.
  21. Chue, C.H., Liu, C.I., 2001. Disappearance of 90°-90°free-edge stress singularity in composite laminates. The Fourth Pacific International Conference on Aerospace Science and Technology (PICAST4), Kaohsiung, Taiwan, ROC.
  22. 陳重德, 褚晴暉, 2001. 含壓電材料楔形之應力奇異性分析. 中華民國力學學會第25屆全國力學會議.
  23. 翁世明, 褚晴暉, 2001. 三種非等向性材料楔形結構之應力奇異性通解. 中華民國力學學會第25屆全國力學會議.
  24. 劉晉奇, 許益通, 郭光凱, 李坤達, 蕭文培, 褚晴暉, 2002. 含裂縫軌道之輪軌接觸有限元素模擬. 海峽兩岸都市軌道運輸學術研討會, 台灣新竹.
  25. 曾界彰, 曾光宏, 林子捷, 劉晉奇, 褚晴暉, 2002. 銲接波紋管幾何參數設計之有限元素分析. 中華民國銲接協會91年度銲接論文發表會, 台灣台中.
  26. Wei, W.B., Liu, T.J.C., Chue, C.H., 2002. Antiplane electro-mechanical field of a two-piezoelectric wedge under a pair of concentrated forces and free charges. 中華民國力學學會第26屆全國力學會議, 台灣雲林.
  27. 翁世明, 褚晴暉, 2002. 含非等向性材料與壓電材料之全相結構應力奇異性分析. 中華民國力學學會第26屆全國力學會議, 台灣雲林.
  28. 陳重德, 褚晴暉, 2002. 雙壓電材料楔形之面外應力奇異性階數分析.中華民國力學學會第26屆全國力學會議, 台灣雲林.
  29. 褚晴暉, 翁世明, 2002. 三種非等向性楔形及全相結構之應力奇異性通解及其應用. 中華民國第七屆破壞科學研討會, 台灣屏東.
  30. Chue, C.H., Weng, S.M., 2003. Fracture analysis of piezoelectric materials with an arbitrarily oriented crack using energy density theory. Second M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, USA, June 17-20, 2003.
  31. Chen, C.D., Chue, C.H., 2003. The electro-elastic analysis of a composite piezoelectric strip with an internal semi-infinite electrode. Second M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, USA, June 17-20, 2003.
  32. Liu, T.J.C., Chue, C.H., 2004. The antiplane electro-elastic analysis of a bimaterial piezoelectric wedge with an interface crack. 中華民國第八屆破壞科學研討會, 台灣屏東.
  33. 歐怡良, 褚晴暉, 2004. 非均質性材料楔形結構的面外應力場分析. 中華民國第八屆破壞科學研討會, 台灣屏東.
  34. 洪偉宸, 陳重德, 褚晴暉, 2004. 含缺口平板之脆性破壞分析.中華民國第八屆破壞科學研討會, 台灣屏東.
  35. Liu, T.J.C., Chue, C.H., 2004. Fracture mechanics of the interface crack in a bimaterial piezoelectric wedge under antiplane deformation.International Conference on Computational & Experimental Engineering & Science, Madeira, Portugal, 26-29 July 2004.
  36. Ou, Y.L., Chue, C.H., 2004. Antiplane stress analysis of a non-homogeneous material wedge.   International Conference on Computational & Experimental Engineering & Science, Madeira, Portugal, 26-29 July 2004.
  37. 鄭博仁, 劉晉奇, 褚晴暉, 陳運慶, 施光亮, 2004. 波紋管之應力與剛性分析. 中華民國力學學會第28屆全國力學會議, 台灣台北.
  38. 林慧菁, 劉晉奇, 褚晴暉, 王東堯, 2004. 人體下顎骨之三維有限元素模型建立與應力分析. 2004醫學工程年會暨研討會, 台灣台南.
  39. 劉維儒, 翁世明, 褚晴暉, 王東堯, 2004. 小臼齒二級窩洞填補之應力奇異性分析-非等向性琺瑯質的影響.2004醫學工程年會暨研討會, 台灣台南.
  40. 劉晉奇, 劉維儒, 褚晴暉, 楊永宏, 陳運慶, 李朝祥, 2004. ANSYS應用於波紋管的挫屈分析. 2004 Taiwan ANSYS Conference, 虎門科技公司, 台灣台北.
  41. He-Yan Shie, Shang-Wu Tsai , and  Ching-Hwei Chue, “The End Effects of Two-Layer Circular Tubes with Cylindrically Orthotropic Non-homogeneous Materials Under Torsion”, The Sixth Japan-Taiwan Workshop on Mechanical and Aerospace Engineering,Sapporo, Japan, Dec. 7-10, 2011.
  42. Tz-Shian Juang, Guan-Ting Lin, and Ching-Hwei Chue, “Influence Analysis of the Soundpost on the Violin Vibration”, The Sixth Japan-Taiwan Workshop on Mechanical and Aerospace Engineering,Sapporo, Japan, Dec. 7-10, 2011.
  43. Ching-Yuen Liao, Ming-Ta Chuang, and Ching-Hwei Chue, “Analysis of a Functionally Graded Plane with a Central Crack by Using Strain Energy Density Theory”, The Sixth Japan-Taiwan Workshop on Mechanical and Aerospace Engineering,Sapporo, Japan, Dec. 7-10, 2011.
  44. Hong-Sen Yan, Ching-Hwei Chue, “The Collections of Machine Tools in NCKU ME Department”, International Conference on History of Mechaincal Technology and Mechanical Design, (ICHMTMD), March 23-25, 2012.

C. Technical Report

1. G. C. Sih and C. H. Chue, “Transient Dynamic Stress and Failure Analysis of XT-75 20MM Cannon Support”, Technical Report, Lehigh Branch Institute of Fracture and Solid Mechanics, 1988.

2. 褚晴暉,黃清進,“圓管裂縫破壞分析”,工業技術研究院,研究報告,4GM6000, 1990.

3. 褚晴暉,張祥裕,“含裂縫之焊接結構體的安全評估”,金屬工業發展中心,研究報告,1990.

4. 褚晴暉,章立忠,“具有傾斜中央裂紋平板的黏著結合修補研究,國科會專題研究報告,NSC79-0401-E006-25, 1991.

5. 褚晴暉,吳明龍,“含裂縫旋轉軸運轉壽命評估計術之建立”,原子能委員會,研究報告,1991.

6. 褚晴暉,張志祥,“含裂縫旋轉軸之破壞分析”,國科會專題研究報告,NSC81-0401-E006-588, 1993.

7. 褚晴暉,張耀豪,“雙軸向負荷下圓孔週邊裂縫之黏著修補研究”,國科會專題研究報告,NSC82-0401-E006-102, 1993.

8. 褚晴暉,林隆安,“隨機負荷之疲勞壽命評估技術“,金屬工業發展中心,研究報告,1993.

9. 褚晴暉,薛昌明,李驊登,“飛機用高級材料之特性與規格”,國防科技研究報告,中科院航發中心,1993.

10. 褚晴暉,王尚智,“提升含邊緣裂縫圓孔疲勞壽命之研究”,國科會專題研究報告,NSC 82-0424-E006-446, 1994.

11. 褚晴暉,劉晉奇,“複合材料疊層順序對黏著修補的影響”,國科會專題研究報告,NSC 83-0115-C006-01-028E, 1993.

12. 褚晴暉,陳貴文,“構件焊接變形及殘留應力摸擬分析與防治【I】,金屬工業發展中心,研究報告,1994.

13. 褚晴暉,周文清,“黏著修補技術之補片最佳化設計”,國科會專題研究報告,NSC 84-2212-E006-064, 1995.

14. 褚晴暉,邱柏青,“黏著修補技術之補片大小及纖維疊層方向分析”,國科會專題研究報告,NSC 84-2212-E006-035, 1995.

15. 褚晴暉,洪志憲,“構件焊接變形及殘留應力摸擬分析與防治【II】”,金屬工業發展中心,研究報告,1995.

16. 褚晴暉,楊宜霖,林瑞模,“人工股骨莖與股骨接觸面應力分佈的術前評估”,成大醫院研究報告,1994.

  1. 褚晴暉,楊宜霖,林瑞模,張志涵,“設計國人人工股骨莖之重要參數”,成大醫院研究報告,1995.
  2. 褚晴暉,劉晉奇,“軌道裂紋之穩定性及其疲勞壽之評估”,國科會專題研究報告,NSC 86-2212-E006-072, 1997.
  3. 褚晴暉,李永春,陳重德,“不等振幅負載下表面裂縫疲勞破壞分析(”,台電專題研究報告,NSC 88-TPC-7-006-005.
  4. 褚晴暉,劉全益,“多相材料結構之應力奇異性-IC封裝破裂問題分析與探討”國科會專題研究報告,NSC 88-2212-E-006-012.
  5. 褚晴暉,吳浩清,”裂縫壓力容器之破損分析– 裂縫面液壓效應”,中油國科會產學合作計畫報告,NSC 87-CPC-E-006-012.
  6. 褚晴暉,李永春,陳重德,“不等振幅負載下表面裂縫疲勞破壞分析(”,台電專題研究報告,NSC 89-TPC-7-006-027.
  7. 褚晴暉,陳重德, “微機電系統於復健工程之整合研究 (III) - 子計畫四:膝上義肢用微型感測器之損壞分析”,國科會專題計畫報告,NSC 89-2218-E-006-010.
  8. 褚晴暉,鄭泗昌,翁世明, “汽車車體結構安全性之力學分析”,嚴慶齡基金會, 八八年度研究計畫.
  9. 褚晴暉,劉全益,“非等向性楔形結構之應力奇異性分析”,國科會研究計畫,NSC89-2212-E-006-119.
  10. 褚晴暉,鍾新輝,“滾動接觸之點蝕參數研究”, 國科會研究計畫,NSC89-2212-E-006-118.
  11. 褚晴暉,“含裂紋或具有楔形之壓電材料破壞分析(I)” 國科會研究計畫,NSC91-2212-E-006-077.
  12. 褚晴暉,“含裂紋或具有楔形之壓電材料破壞分析(I)” 國科會研究計畫,NSC92-2212-E-006-123.
  13. 褚晴暉,“含任意方向裂紋之壓電材料破壞分析” 國科會研究計畫,NSC93-2212-E-006-088.
  14. 褚晴暉,“非均質性材料楔形結構的面外應力場分析” 國科會研究計畫,NSC93-2212-E-006-089.
  15. 褚晴暉,“微電阻封銲製程中動態電阻與熱流之分析及控制技術之研究”,93C11.
  16. 褚晴暉,“伸縮接頭最佳設計分析研究”,93S180.
  17. 褚晴暉, 陳重德, 劉晉奇, 翁世明. 運送鋼液台車之應力分析. 成大機械系與美利德公司合作計畫, 2003.
  18. 褚晴暉, 劉晉奇, 翁世明, 陳重德. 高壓容器應力模擬分析研究. 成大機械系與金屬中心合作計畫, 2003.
  19. 褚晴暉, 劉晉奇, 歐怡良. 擠型機沖頭系統研改及分析:油壓缸之結構力學分析. 成大機械系、中山科學院第一研究所與美利德公司合作計畫, 2004.
  20. 褚晴暉, 翁世明, 劉晉奇. 複合耐火爐加載用鋼結構之有限元素分析.成大機械系與美利德公司合作計畫, 2004.
  21. 褚晴暉, 劉晉奇, 歐怡良, 徐瑋鴻.膜片閥之有限元素力學分析. 成大機械系與金屬中心合作計畫, 2004.
  22. 褚晴暉, 歐怡良, 徐瑋鴻, 劉維儒. 高壓動力系統元件結構效能及系統最佳化分析. 成大機械系與美利德公司合作計畫, 2005.
  23. 褚晴暉, 劉晉奇, 歐怡良. 微型操縱桿結構中滑動子之分析. 成大機械系與台灣博士電子股份有限公司合作計畫, 2005.
  24. 褚晴暉,“管材結構分析評估及斷線狀況之後續改善工法結構分析”,96S024 PCCP.
  25. 褚晴暉,“雙有限壓電楔形體結構在面外剪力負載以及不同邊界條件下之機電場分析” 國科會研究計畫,NSC 96-2221-E -216 –MY2。
  26. 褚晴暉,“含兩個嵌入式任意方向裂縫雙接合功能梯度壓電材料條板問題破壞分析” 國科會研究計畫,NSC 98-2221-E-049–MY2。

專書

  1. 劉晉奇,褚晴暉,有限元素分析與ANSYS的工程應用(Engineering Applications of Finite Element Analysis with ANSYS),滄海書局,2006。
  2. 林依蓁、陳恆安、陳政宏、郭美芳、郭瑞坤、黃勝裕、褚晴暉、蔡侑樺、鄭安佑(依姓名筆劃排列),外國的月亮一樣圓:科技博物館與大學博物館的在地思考,入選第四屆國家出版獎,主編:陳政宏、陳恆安,國立成功大學,ISBN 9789860296785,11月,2011年。