Skip to Content

王俊志

personal pictures

教授
姓名 王俊志 (J-J Junz Wang)
組別 機械製造與材料組
教授室 機械系館六樓91610
分機 62189
傳真機 06-2367231
電子信箱 jjwang@mail.ncku.edu.tw
個人網站 http://www.me.ncku.edu.tw/~psl/
學歷
  1. 中華民國國立清華大學
  2. 美國賓州州立大學
  3. 美國喬治亞理工學院
經歷
  1. 美國賓州州大交通研究院--自動化量測設備開發、設計、製作--研究員
  2. 美國GTE公司--自動化生產設備設計、CAD、CAM--自動化設備工程師/Supervisor
  3. 國立成功大學--機械工程學系--教授
專長
  1. 高速硬切削之材料響應及刀具負荷分析
  2. 微銑削及磨削精密加工製程分析
  3. 切削研磨製程與工具機系統之動態特性及穩定性分析、異常現象之線上偵測與控制
  4. 硬脆材料(矽晶、玻璃、陶瓷等)切削與研磨之加工機制探討
  5. 創新加工方法與研究
  6. 工具機與切削動力學
  7. 機光電系統整合與自動化
  8. 精密加工系統設計分析
  9. 半導體光電陶瓷等硬脆材料之加工現象及原理
教師研究介紹
服務

1 . 2010-2011年   教務處-副教務長兼雲嘉南區域教學資源中心主任
2 . 2008年              教務處-教學資訊組組長
3 . 2007-2008年   教務處-進修推廣教育中心主任

榮譽

1 . 2004年 工程論文獎
2 . 2003年  Thomas Stephan Prize
 

專利

1 . 發明名稱:人蔘切割法 發明人: 陳慶裕 王俊志 李森墉 中華民國第I 239236 發明專利
2 . Method for evaluating grinding parameters of grinding wheels, Inventors: Wu Chung-Yung, Chen Kuo-Hua, Wang Jiunnjyh, Chang Huang-Chuan, European Patent EP 2 159 002 B1, 2011
3 . 發明名稱:充填人造石材的鋁擠型構件,發明人:王俊志 宋麒豐 王兆輝 中華民國專利M477335 2013/10/30

著作

期刊論文

  1. Kuo, R.Y., Wang, J.J. and Lee R.N., 2018, “Effect of Insert Groove Geometry on Chip Breaking Performance”, Journal of Mechanics, Vol. 34, No. 1, pp. 67-73.
  2. Wang J.J., Sung C.F., 2017, “Trajectories of forces and displacements in stable and unstable milling”, Int. J. of Advanced Manufacturing Technology, 89(9), 2803-2819.
  3. Wang J.J., Sung C.F., 2016, “Mode Shapes of Directional Matrix and Chatter in Milling”, Chinese Society of Mechanical Engineers, pp. 183-191.
  4. Wang J.J., Uhlmann E, Oberschmidt D, Sung C.F., Perfilov I, 2016, “Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping”, CIRP Ann - Manufacturing Technology 65(1):113–116.
  5. Wang, J.J., Lin, C.C., 2016, “A predictive Model for Thin Plate Deformation in Surface Milling”, Chinese Society of Mechanical Engineers, 37(2):131-136.
  6. Zheng, C. M., Wang, J.-J. Junz, and Sung, C. F., 2014, “Analytical prediction of the critical depth of cut and worst spindle speeds for chatter in end milling”, ASME Journal of Manufacturing Science and Engineering, Vol. 136(1).
  7. Zheng, C. M., and Wang, J.-J. Junz, 2013, “Stability prediction in radial immersion for milling with symmetric structure”, International Journal of Machine Tools and Manufacture, Vol. 75, pp. 72-81.
  8. Te-Ching Hsiao, Chao-Yu Huang and Jiunn-Jyh Junz Wang, 2013, “Analysis on Milling Stability Performed under the Conditions of Positive and Negative Process Stiffness”, Advanced Material Research, Vols. 690-693, pp. 2408-2421.
  9. Sung-Hua Wu, Rong-Shean Lee, J.-J. Junz Wang, 2013/5, “Specific energy distributions for sinusoidal multi-cutters in groove-sawing process”, Journal of Material Processing Technology, pp 631-659.
  10.  SH Wu, J-J Junz Wang and RS Lee, 2012, “Chip Fractal Geometry and Loading Characteristics of Sinusoidal Multi-Cutters in Hack-Sawing Process”, International Journal of Machine Tools and Manufacture, 59, 65-80.
  11. Chiang, H.N. and Wang, J-J. Junz, 2011/10, “Force and Form Error Models for Wavy Surface in Successive Peripheral Milling Process”, Journal of the Chinese Society of Mechanical Engineers, Vol. 32, No 5, 391-400. (SCI)
  12. Chiang, H.N. and Wang, J-J. Junz, 2011/10, “Generating Mechanism and Formation Criteria of Kinked Surface in Peripheral Milling”, International Journal of Machine Tools and Manufacture, 51, 816-830.
  13. Chiang, H.N. and Wang, J-J. Junz, 2011/08, “An analysis of overcut variation and coupling effects of dimensional variables in EDM process”, International Journal of Advanced Manufacturing Technology 55:935–943. (SCI)
  14. Liao, Y.Y., Wang, J.-J. Junz, and Huang, C.-Y., 2011/07, “The Effect of Chip Thickness on Edge Chipping and Grinding Ratio in Groove Grinding of Single Crystal Silicon”, DOI: 10.1177/2041297510393591, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture. (SCI)
  15. Huang, C.Y. and Wang, J.-J. Junz, 2011/04, “Effects of Cutting Conditions on Dynamic Cutting Factor and Process Damping in Milling,” Int. J. Machine Tool and Manufacture , 51, pp. 320-330  (SCI) (NSC-90-2212-E-006-90)
  16. Huang, C.Y. and Wang, J.-J. Junz, 2010, “A pole/zero cancellation approach to reducing forced vibration in end milling”, Int. J. Machine Tool and Manufacture, 50 (2010) 601–610 (SCI)
  17. Wu, B.H. and Wang, J.-J. Junz, 2009, “A Neuro-Fuzzy Approach to Generating Mold/Die Polishing Sequences”, Journal of Material Processing Technology 209, pp. 3241-3250. (SCI) (NSC-88-2212-E006-097)
  18. Chang, H.C. and Wang, J-J Junz, 2008, “A Stochastic Grinding Force Model Considering Random Grit Distribution”, International Journal of Machine Tools and Manufacture, Vol. 48, pp. 1335-1344. SCI (NSC 94-2623-7-006-004)
  19. Wang, J.-J.Junz and Liao, Y.Y., 2008, “Critical Depth of Cut and Specific Cutting Energy of a Micro-Scribing Process for Hard and Brittle Materials”, January 2008, ASME, Journal of Engineering Materials and Technology, Vol. 130, pp. 011002-1—011002-6. (SCI) (NSC94-2212-E006-034)
  20. Huang, C.Y. and Wang, J.-J., 2007, “Mechanistic Modeling of Process Damping in Peripheral Milling”, ASME, J. of Manufacturing Science and Engineering, Vol. 129, pp. 12-20. (SCI, EI) (NSC-90-2212-E-006-090) (SCI)
  21. Wang, J-J, Chung, C.K., Wu, B.H. and Liao, Y.Y., 2007, “Fabrication of Wedge Shaped Tool via Electrochemical Micromachining with Diamond-Like Coating”, J. Material Processing Technology, Vols. 187–188, pp. 264–269. (SCI)
  22. Wang, J.-J. Junzand Liao, Y.L., 2006, “Estimating Critical Depth of Cut and Tool Factor for a Mechanical Scribing Process”, Journal of the Chinese Society of Mechanical Engineers. (EI) (NSC91-2212-E006-090)
  23. Wang, J.-J. Junz, Wu, B.H. and Hou, J.K., 2006, “A Time Optimized Process Planning System for Mold/Die Polishing”, Materials Science Forum, Vol. 505, pp. 499-504. (EI) (NSC-88-2212-E006-097)
  24. Wang, J.-J. Junzand Chang, H.C., 2004, “Extracting Cutting Constants via Harmonic Force Components for a General Helical End Mill”, Int. J. Advanced Manufacturing Technology, Vol. 24, pp. 415-424. (SCI, EI) (NSC-89-2212-E-006-162)
  25. Wang, J.-J. Junzand Huang, C.Y., 2004, “A Force Model Based Approach to Estimating Cutter Axis Offset in Ball End Milling”, Int. J. Advanced Manufacturing Technology, Vol. 24, pp. 910-918. (SCI, EI) (NSC-90-2212-E-006-90)
  26. Wang, J.-J. Junzand Zheng, C.M., 2003, “On-line Identification of Shearing and Plowing Constants in End Milling”, ASME, J. of Manufacturing Science and Engineering, Vol. 125, pp. 58-65. (SCI, EI) (NSC-90-2212-E-006-090)
  27. Zheng, C.M. and Wang, J.-J. Junz, 2003, “Estimation of in-process cutting constants in ball-end milling”, Proc. Instn Mech Engrs, Part B: J. Engineering Manufacture, Vol. 217, pp 45-56. (SCI, EI) (NSC-90-2212-E-006-090) (Recipient of 2003 IMechE Thomas Stephen Prize)
  28. Wang, J.-J. Junzand Zheng, C.M., 2003, “Identification of Cutter Offset in End Milling without a Prior Knowledge of Cutting Coefficients”, Int. J. Machine Tool and Manufacture, Vol. 43/7, pp 687 – 697. (SCI, EI) (NSC-89-2212-E-006-162)
  29. Wang, J.-J. Junzand Zheng, C.M., 2003, “Force Spectra Characteristics of General Helical Milling Cutters”, Journal of the Chinese Society of Mechanical Engineers, Vol. 24, pp. 1-11. (EI) (NSC89-2212-E-006-074) (獲得93年中國工程師學會工程論文獎)
  30. Wang, J.-J. Junzand Yang, C.S., 2003, “Angle and Frequency Domain Force Models for a Roughing End Mill with a Sinusoidal Edge Profile”, Int. J. Machine Tool & Manufacture, Vol. 43/14, pp 1509- 1520, 2003. (SCI, EI) (NSC-83-0425-E-006-003)
  31. Wang, J.-J. Junzand Zheng, M.Y., 2003, “On the Machining Characteristics of H13 Tool Steel in Different Hardness States in Ball End Milling”, Int. J. Advanced Manufacturing Technology, Vol. 22, pp. 855-863. (SCI, EI) (NSC-90-2212-E-006-090)
  32. Wang, J.-J. Junzand Wu, B.F., 2002, “Determining Mechanistic Constants from Dynamic Force Components in Ball End Milling with Unknown Cutter Phase Angle”, Journal of the Chinese Society of Mechanical Engineers, Vol. 23/6, pp. 487-495. (EI). (NSC-90-2212-E-006-090)
  33. Wang, J.-J. Junz, Huang, C.Y., and Chiang, H.-S., 2002, “Forced Vibration Analysis in the End Milling of a Thin Plate”, Journal of the Chinese Society of Mechanical Engineers, Vol. 23/5, pp. 417-425. (EI). (NSC-89-2212-E-006-162)
  34. Wang, J.-J. Junzand Zheng, C.M., 2002, “An Analytical Force Model with Shearing and Ploughing Mechanisms for End Milling”, Int. J. of Machine Tool & Manufacture, Vol. 42, pp. 761-771. (SCI, EI) (NSC-89-2212-E-006-162)
  35. Wang, J.-J. Junzand Zheng, C.M., 2002, “Identification of Shearing and Ploughing Cutting Constants from Average Forces in Ball-End Milling”, Int. J. of Machine Tools & Manufacture, Vol. 42, pp. 695-705. (SCI, EI) (NSC-89-2212-E-006-074)
  36. Wang, J.-J.and Liang, S.Y., 1996, “Chip Load Kinematics in Milling with Radial Cutter Runout”, J. of Engineering for Industry, Vol.118/1, pp.111-116. (SCI, EI)
  37. Liang, S.Y., Wang, J.-J., 1994, “Milling Force Convolution Modeling for Identification of Cutter Axis Offset”, Int. J. of Machine Tools and Manufacture, Vol.34/8, pp.1177-1190. (SCI, EI)
  38. Wang, J.-J., Liang, S.Y. and Book, W.J., 1994, “Convolution Analysis of Milling Force Pulsation”, J. of Engineering for Industry, Vol.116/1, pp.17-25. (SCI, EI)

研討會論文

  1. JJ Wang and Sung CF, “The best and worst feed direction in milling chatter,” ASME, Manufacturing Science and Engineering Conference, June 18-22, 2018, College Station, TX, US
  2. Ruo‐Ning Lee and Jiunn-jyh Wang, “Optimal design of insert geometry considering cutting forces,” 6th Annual Conference on Engineering and Information Technology, Kyoto, Japan, March 27-29, 2018
  3. Chi-Feng Sung and Jiunnjyh Wang, “Critical depth of cut, the best and worst feed directions in 2D milling chatter,” 6th International Conference on Virtual Machining Process Technology, Montreal, Canada, May 29-June 2, 2017
  4. J.J. Wang, E. Uhlmann, D. Oberschmidt, J.Y. Yeh, E.J. Lin, C.F. Sung, “A reduced-order multi-frequency stability model for micro milling with process damping,” World Congress on Micro and Nano Manufacturing (WCMNM), March 27-30, 2017, Kaohsiung, Taiwan
  5. Chi-Feng Sung and Jiunnjyh Wang, “Chatter prediction in milling: an Eigen-analysis approach,” 5th Annual Conference on Engineering and Information Technology, March 29-31 2017, Nagoya, Japan
  6. 王俊志、張富傑, “主軸旋轉方向對雙主軸銑之穩定性分析,” 中國機械工程學會第三十三屆全國學術研討會, 2016/12
  7. 王俊志、葉作益, “製程阻尼對銑削加工多頻率穩定性之影響,” 中國機械工程學會第三十三屆全國學術研討會, 2016/12
  8. Wang JJ, Uhlmann E, Oberschmidt D, Sung CF, Perfilov I, 2016, “Critical depth of cut and asymptotic spindle speed for chatter in micro milling with process damping,” 66th CIRP General Assembly, Guimaraes, Portugal, Aug. 21-27, 2016
  9. Wang, JJ, Sung CF, “Tool vibration trajectory during chatter in milling,” The 5th International Conference on Virtual Machining Process Technology, Taipei, Taiwan, May, 2016
  10. 陳威辰、王俊志, “端銑刀刃口幾何對系統穩定性影響之研究,” 中國機械工程學會第三十二屆全國學術研討會, 2015/12
  11. 王俊志、廖俊傑、蘇金發, “穩定圖上最佳銑削切深之解析預測,” 中國機械工程學會第三十二屆全國學術研討會, 2015/12
  12. 王俊志、廖俊傑, “銑削穩定裕度圖之解析預測,” 中國機械工程學會第三十二屆全國學術研討會, 2015/12
  13. Jiunn-Jyh J. Wangand Chieh-Cheng Lin, “A Predictive Model for Thin Plate Deformation in Surface Milling,” ICOMM, March 2015, Milan, Italy
  14. Ruei-Yang Kuo, Ruo-Ning Lee, Jiunn-Jyh Junz Wang, “Effect of turning insert groove geometry on chip breaking performance, ” International Forum on System and Mechtronics, Tainan, Taiwan, 2014
  15. Ruei-Yang Kuo, Jiunn-Jyh Junz Wang, “Influence of turning insert groove geometry on chip breaking performance, ” 5th International Conference on Advanced Manufacturing (ICAM), ChiaYi, Taiwan, 09/30-10/03, 2014
  16. Yongyuan Liao and Jiunn-Jyh Wang , “Ductile Grinding for Enhanced Silicon Wafer Sawing Performance,” 海峽兩岸先進製造研討會2014/09/23-30, 寧夏銀川
  17. 趙浲序、王俊志, “雷射脈衝參數對材料移除製程之影響,” 中國機械工程學會第三十屆全國學術研討會, 2013/12/06
  18. 王兆輝、王俊志, “以人造花崗岩改善加工機之動態特性與加工穩定性研究,” 中國機械工程學會第三十屆全國學術研討會, 2013/12/06
  19. Lin Chieh-Cheng and Wang Jiunn-Jyh Junz, “A Mechanistic Flatness Model for Plates of Various Thickness in Milling, ” 16th International Conference on Advances in Materials & Processing Technologies, Taipei, Taiwan, 2013/12/06
  20. H. N. Chiang, P. W. Ko, and J. J. Wang, “Micro Pseudo-milling of Single Crystalline Silicon via Biaxial Vibration of a Single Point Diamond Tool,” The 63rd CIRP General Assembly, Kopenhagen, Denmark, 2013/08/18
  21. 王俊志、宋麒豐、王兆輝, “適合於快速製程參數規劃之銑削穩定性艾根分析,” 第十屆兩岸四地先進製造技術研討會會議台灣中興大學, 2013/06
  22. Te-Ching Hsiao, Chao-Yu Huang and Jiunn-Jyh Junz Wang, 2013/04, “Analysis on Milling Stability Performed under the Conditions of Positive and Negative Process Stiffness,” Advanced Material Research, Vols. 690-693, pp. 2408-2421.
  23. 蘇家賦,王俊志, “能量參數對雷射輔助硬銑削製程之影響,” 101年中國機械工程學會年會暨第29藉學術研討會, 國立中山大學, 高雄市, 臺灣, 12月7-8日, 2012.
  24. 劉勝峯,王俊志, “微銑削加工軸向切深對系統穩定性之影響,” 101年中國機械工程學會年會暨第29藉學術研討會, 國立中山大學,高雄市, 臺灣, 12月7-8日, 2012.
  25. 盧書和,王俊志, “非對稱結構銑削振動之改善, ” 101年中國機械工程學會年會暨第29藉學術研討會, 國立中山大學, 高雄市, 臺灣,12月7-8日, 2012.
  26. H. N. Chiang, Po-Wei Ko, J.-J. Junz Wang, Chia-Min Zheng, “Machining of Single Crystalline Silicon Using Biaxial Vibration with Adjustable Phase and Amplitude,” 7th International Conference on Micro-Manufacturing (ICOMM), Evanston, IL, USA, March 11-14, 2012
  27. CM Zheng and J-J Wang, “Formulation of Worst Spindle Speeds Considering Stability in End Milling, ” International Conference on Advanced Manufacturing, Jiaoxi, Yilan, Taiwan, 201
  28. 郭晉瑋、鄭嘉敏、王俊志, “微量潤滑對刀腹磨耗及銑削穩定性之影響分析:以切削力模式為基礎的評估方法,” 中華民國力學學會年會暨第35屆全國力學會議, 國立成功大學, 台南市, 臺灣, 11月18-19日, 2011
  29. 陳建名、王俊志、鄭嘉敏, “圓柱工件端銑之尺寸與幾何誤差解析模式,” 中國機械工程學會第二十八屆全國學術研討會, 國立中興大學, 台中市, 台灣, 12月10-11日, 2011
  30. 柯博偉、王俊志, “雙軸向振動切削之相位與振幅對單晶矽延脆轉換深度之影響,” 中國機械工程學會第二十八屆全國學術研討會, 國立中興大學, 台中市, 台灣, 12月10-11日, 2011
  31. H. N. Chiang, P. W. Ko, J. J. Wang, “An Investigation of Biaxial Vibration-Assisted Scribing for Single Crystal Silicon,” 6th International Conference on Micro-Manufacturing ICOMM, 2011, Tokyo, Japan
  32. 郭瀚陽、江浩寧、王俊志, “研磨製程中預應力對薄板工件平行度之影響,” 中國機械工程學會第二十七屆全國學術研討會論文集, 2010
  33. 王偉倫、江浩寧、王俊志, “高壓氣冷與超音波潤滑對模具鋼銑削特性影響之研究,” 中華民國力學學會第三十四屆全國力學會議, 2010
  34. 李育儒、江浩寧、王俊志、許富銓, “銑削製程工件幾何公差之分析,” 中國機械工程學會第二十七屆全國學術研討會論文集, 2010
  35. 江浩寧、柳世恆、王俊志, “二維振動輔助劃切加工單晶矽之研究,” 海峽兩岸超硬材料技術發展論壇, 2010
  36. H. N. Chiang, J. J. Wang, F. C. Hsu and Y. J. Li, “Dimension error in the presence of process and machine error in end milling,” Proceedings of 2010 ASME International Manufacturing Science and Engineering Conference, Erie, PA 2010
  37. H. N. Chiang, J. J. Wang, F. C. Hsu, and Y. J. Li, 2010 “An Investigation of Vibration-Assisted Scribing Process for Brittle Materials,” ASME International Manufacturing Science and Engineering Conference Oct., 2010, Erie, PA, USA
  38. Y. J. Li, H. N. Chiang, J. J. Wang, and F. C. Hsu, “The Analysis of Geometric Dimension and Tolerance of Workpiece in Milling Process,” (Invited Talk), International Forum on System and Mechatronics, Sep., 2010, Singapore
  39. H. N. Chiang S. H. Liu, and J. J. Wang, 2010, “An Investigation of Biaxial Vibration-Assisted Scribing for Single Crystal Silicon, ” International Forum on System and Mechatronics, Sep., 2010, Singapore
  40. C. Y. Huang and J.-J. Junz Wang, “MODE COUPLING BEHAVIOR IN END MILLING,” ASME International Mechanical Engineering Congress and Exposition, 2009, Lake Buena Vista, FL, USA
  41. George Mathai, Mukund Kumar, Shreyes Melkote, Fu-Chuan Hsu, Cheng-Chang Chiu, and J.-J. Wang, “Comparison of Relative Contributions of Process and Geometric Errors for Micro and Macro Scale Milling Using an Integrated Error Model,” ASME International Manufacturing Science and Engineering Conference, 2009, Purdue University, Indiana, USA 
  42. Y. Y. Liao, H. N. Chiang, J. J. Wang, F. C. Hsu, C. F. Wu , and Shreyes N. Melkote, “A PART ERROR MODEL CONSIDERING THE MACHINE TOOL POSITIONING ERRORS AND PROCESS-INDUCED ERRORS,” ASME International Manufacturing Science and Engineering Conference, 2009, Purdue University, Indiana, USA
  43. Y. Y. Liao, J. J. Wang, F. C. Hsu, Y. T. Lyu, and S. N. Melkote, “Modeling of Variance for machine tool positioning errors,” Proceedings of the 4M/ICOMM International Conference on Multi-Material Micro Manufacture, 2009, Karlsruhe, Germany
  44. 許靖子、王俊志、林志憲, “奈米刮削對矽相變化之影響,” 中國機械工程學會第二十六屆全國學術研討會論文集, 2009
  45. 陳以中、王俊志, “研磨條件對薄板工件平行度之影響,” 中國機械工程學會第二十六屆機械工程研討會論文集, 2009
  46. 江浩寧、王俊志、彭啟明、許富銓, “結合工具機空間誤差與製程誤差對工件尺寸精度影響之研究,” 中國機械工程學會第二十六屆全國學術研討會論文集, 2009
  47. 彭啟明、王俊志、林志憲, “銑削動態力與工具機空間誤差對加工件尺寸誤差之影響,” 中華民國力學學會第三十三屆全國力學會議, 2009
  48. 黃朝鈺、許靖子、王俊志、謝吉祥、謝伯宗、陳道星, “鋁膜奈米溝槽之刮削研究,” 精密機械與製造科技研討會,墾丁台灣, 2009
  49. 黃朝鈺、王俊志, “正製程剛性及負製程剛性之銑削穩定性分析,” 精密機械與製造科技研討會,墾丁台灣, 2009
  50. 高嘉懋、彭啟明、廖永源、王俊志, “考慮工具機空間誤差與製程變異之產品誤差模式建立與驗證,” 中國機械工程學會第二十五屆全國學術研討會, 大葉大學, 彰化, 2008
  51. 高嘉懋、廖永源、王俊志, “XYFZ構型之三軸工具機空間誤差與其變異模式建立與驗證,” 中國機械工程學會第二十五屆全國學術研討會, 大葉大學, 彰化, 2008
  52. H. N. Chiang and J. J. Wang, “Experimental Investigation and analysis on single-crystal-diamond (100) tool edge sharpening process,” International Conference on Abrasive Processes ICMP, Sept. 2008, Cambridge, UK
  53. Y. Y. Liao, J.-J. Wang, F. C. Hsu, Y. Chuang, and S. Y. Liang, “Estimating Dimensional Error of Micro-EDM Process by Analysis of Variance,” International Conference on Micro-manufacturing ICOMM, Sept. 2008, Pittsburgh, Pennsylvania, USA
  54. F. C. Hsu, C. C. Chiu, Y. T. Lyu, W. L. Chang, J.-J. Wang, Y. Y. Liao, and S. Y. Liang, “Application of accuracy enhancement module for precision machine tools by spatial error compensation,” ASME International Conference on Manufacturing Science and Engineering MSEC, Oct. 2008, Evanston, IL, USA
  55. 許芳明、王俊志、江浩寧, “微銑削加工特性之探討,” 中華民國力學學會第三十一屆全國力學會議論文集, 2007
  56. 王俊志、廖永源、侯志龍、許富銓、梁越昇, 2007, “以和方根法進行微放電加工的孔尺寸以及機台誤差判認,” 中國機械工程學會第二十四屆全國學術研討會, 中原大學, 桃園
  57. J. J. Wang, J. L. Hou, F. C. Hsu, Y. Y. Liao, and S. Liang, 2007, "A RSS Method for Estimating Hole Dimension Error in a Batch Micro-EDM Process," Proceedings of the 2007 International Manufacturing Science And Engineering Conference MSEC2007, Nov. 2007, Atlanta, Georgia, USA.
  58. 江浩寧、王俊志、謝慶民, 2006, “常用難切削航太材料鑽削加工特性之探討,” 第三十屆全國力學會議, 彰化
  59. Yong-Yuan Liao, Jiunn-Jyh Wang, 2006, “The Effect of Chip Thickness on Quality of a Die-Sawing Process,” International Forum on System and Mechatronics, Tainan
  60. Wang, J-J, Chung, C.K., Wu, B.H. and Liao, Y.Y., 2006, “Fabrication of Wedge Shaped Tool via Electrochemical Micromachining with Diamond-Like Coating,” The 3rd International Conference on Advanced Forming and Die Manufacturing Technology, Sep. 4-6, Busan, Korea.
  61. 王俊志、廖永源、林哲生, 2006, “切削厚度對於硬脆材料溝槽研磨之崩裂及研磨比之影響,”第五屆海峽兩岸製造技術研討會, 高雄
  62. 蕭詠友、黃朝鈺、王俊志, 2005, “加工參數對硬化鋼之磨削力與磨削係數之影響,” 第二十九屆全國力學會議, 新竹
  63. 廖永源、王俊志, 2005, “切削厚度對於硬脆材料深槽研磨製程之影響,” 第二十九屆全國力學會議, 新竹
  64. 洪裕賓、黃朝鈺、王俊志, 2005, “馬達內藏式主軸動態負載識別之研究,” 中國機械工程學會第二十二屆全國學術研討會論文集, 台北
  65. Wang, J.-J. Junz, Wu, B.S. and Hou, C.K., 2005, “A Time Optimized Process Planning System for Mold/Die Polishing,” International Conference on Advanced Manufacture, Taipei
  66. Wang, J.-J. Junzand Liao, Y.L., 2005, “Estimating Critical Depth of Cut and Tool Factor for a Mechanical Scribing Process,” International Conference on Advanced Manufacture, Taipei.
  67. 王俊志、張煌權、林仁輝、蔡柏偉、聶一夫、傅彥呈、何碩洋, “精密鏡面磨削機制之研究,”  94年度國防科技學術研究計畫成果發表會
  68. Huang C.Y. and Wang, J.-J. 2005, “Mechanistic Modeling of Process Damping in Peripheral Milling,” ASME/IMECE, Orlando, FL, USA.
  69. Jiunn-jyh Junz Wangand Yong-Yuan Liao, 2005, “Critical Depth of Cut and Specific Cutting Energy of a Micro-Scribing Process for Hard and Brittle Materials,” 2nd JSME/ASME International Conference on Materials and Processing, June 2005, Seattle, USA
  70. 廖永源、陳啟宗、王俊志, 2004, “機械性質與加工條件對硬脆材料劃線加工之影響,” 第二十八屆全國力學會議, 台北
  71. 江浩寧、王俊志, 2004, “壓電致動刀具載台之設計分析及其在振動切削上之應用,” 中國機械工程學會第二十一屆全國學術研討會論文集, pp.1839-1844, 高雄
  72. 王俊志、張煌權、邱立仁、陳靖宏, 2004, “薄殼陶瓷材料磨削加工技術之研究,” 國防工業發展基金會委託教育機構九十二年度合作研究計畫成果發表會, 台南
  73. 黃朝鈺、王俊文、王俊志, 2003, “球銑刀傾斜切削銑削力模式之建立與驗證,” 第二十七屆全國力學會議, 台南
  74. 許木清、黃朝鈺、王俊志, 2003, “以馬達內藏式高速主軸之轉速與變頻器電壓預測切削扭矩之研究,” 中國機械工程學會第二十屆全國學術研討會論文集, 台北
  75. 柯凱晉、張煌權、王俊志, 2003, “不同硬度與切速對模具鋼銑削特性影響之研究,” 中國機械工程學會第二十屆全國學術研討會論文集, 台北
  76. Wang, J.-J.and Huang C.Y., 2003, “A Pole/Zero Placement Approach to Reducing Forced Vibration in End Milling,” ASME/IMECE, Washington, D.C.
  77. Wang, J.-J., Zheng, C.M. and Huang, C.Y., 2003, “The Effect of Harmonic Force Components on Regenerative Stability in End Milling,” ASME/IMECE, Washington, D.C.
  78. Wang, J.-J. Junz, Wu, B.F. and Huang, C.Y., 2003, “Identification of Cutter Axis Offset via Cutting Forces in Ball-End Milling,” 第三屆海峽兩岸製造技術研討會論文集, pp. 262-271, 台北
  79. Wang, J.-J. Junzand Wu, B.F., 2002, “Experimental Determination of Mechanistic Cutting Constants in Ball-end Milling,” International Symposium on Experimental Mechanics (ISEM), CD-ROM, Taipei, Taiwan.
  80. 王俊志、鄭茗元, 2002, “SKD61模具鋼銑削特性之探討,” 第二十六屆全國力學會議, 光碟, 虎尾
  81. Wang, J.-J. Junzand Huang, C.Y., 2002, “Reducing Forced Vibration in End Milling of Thin Plate,” The 26th National Conference on Theoretical and Applied Mechanics, CD-ROM, Hu-Wei, Taiwan, R. O. C.
  82. Wang, J.-J. Junz, Wu, B.F. and Chang, H.C., 2002, “Extracting Mechanistic Constants in Ball-End Milling from the Harmonic Force Components,” The 26th National Conference on Theoretical and Applied Mechanics, CD-ROM, Hu-Wei, Taiwan, R. O. C.
  83. Wang, J.-J.and Zheng. C.M., 2002, “A Frequency Domain Force Model with Shearing and Ploughing Mechanisms for a Generalized Helical End Mill,” ASME IMECE, CDROM 3, New Orleans.
  84. 王俊志、張煌權, 2001, “考慮剪切及犁切效應之端銑銑削力架構,” 第二十五屆全國力學會議, pp. 246-253, 台中
  85. 王俊志、張煌權, 2001, “包含側邊及底面犁切力效應之面銑及端銑力模式,” 中國機械工程學會第十八屆全國學術研討會論文集, pp. 303-310, 台北
  86. 王俊志、黃朝鈺, 2001, “球銑刀之銑削力模式,” 2001年精密機械製造學術研討會, pp. 225-1~225-8, 台北
  87. 王俊志、黃朝鈺, 2001, “球銑刀之穩定性分析,” 中國機械工程學會第十八屆全國學術研討會論文集, pp. 295-30, 台北
  88. 王俊志、黃朝鈺、楊政遠, 2001, “葉片高速銑削之系統動態與加工條件分析,” 第二屆海峽兩岸製造技術研討會論文集, pp. 285-293, 大連
  89. 王俊志、張家豪, 2000, “以有限元素法探討薄葉片銑削加工之穩定性分析,” 中國機械工程學會第十七屆全國學術研討會論文集, 光碟, 高雄
  90. 王俊志、吳佩霖, 2000, “在工件溫度限制下最大材料移除率之銑削條件探討,” 中國機械工程學會第十七屆全國學術研討會論文集, 光碟, 高雄