Skip to Content

林仁輝

personal pictures

成大講座教授
姓名 林仁輝 (Jen-Fin Lin)
組別 熱流科學與能源組
教授室 機械系館 五樓91522
分機 62155
傳真機 06-2352973
電子信箱 jflin@mail.ncku.edu.tw
個人網站
學歷
  1. 哥倫比亞大學美國 機械所 博士 1982-09 至 1985-12
經歷
  1. 中國鋼鐵公司 工程師 1974-09 至 1976-07
  2. 國立中央大學 機械系 講師 1978-09 至 1981-08
  3. 國立成功大學 機械系 副教授 1986-08 至 1991-07
  4. 國立成功大學 機械系 教授 1991-08 至 2002-11
  5. 國立成功大學 機械系 特聘教授 2002-12 迄今
  6. 國立成功大學 機械系 講座 2005-12 迄今
  7. 國立成功大學 微奈米科技研究中心 主任 2006-08 至 2011-01
  8. 國立成功大學 奈微所 所長 2006-08 至 2011-01
  9. 國科會 國科會工程處機械固力學門 召集人 2009-12 至 2012-12
專長
  1. 奈米磨潤科技
  2. 奈米檢測理論及技術之研發
  3. 精密傳動及奈米定位之微奈米摩擦理論及實務設計之研究
  4. 高速軸承及滾珠螺桿機構及磨潤研究及訊號處理技術
  5. 薄膜奈米機械材料、熱傳性質、熱膨脹性質之量測技術之建立
  6. 三維碎形粗度及碎形粒子模型之建立及微奈米接觸力學
  7. 晶圓化學機械研磨(CMP)理論及實務
  8. 奈米多尺度力學及分子動力學
  9. 高性能太陽能電池晶片及聚光鏡之模組製程設計及性能檢測
  10. 磨潤物理及化學機制之研究
  11. 奈/微米表面黏著力之量測及模型建立
  12. 奈米加工及檢測技術
  13. In-situ TEM+Nanoindentation技術及奈米薄膜力學模型建立
教師研究介紹
服務

 

1.

擔任國立成功大學第九屆全校大學部論文比賽評審委員

2.

國科會工程處審查委員及複審委員

3.

國科會工程處諮議委員

4.

教育部學術審議委員會審查委員

5.

中國機械工程學會論文委員會委員

6.

中國機會工程學會編輯部承辦編輯

7.

公私立大學教師升等著作審查委員

8.

國科會機械固力學門潤滑與磨耗子題規劃召集人

9.

國防科技學術合作計劃審查委員

10.

公費留學考試博士後研究人員書面審查委員

11.

行政院參等服務獎章(任滿二十年)

12.

曾任成大工學院教師評審委員會委員

13.

曾任機械系教師評審委員會委員

14.

高等教育評鑑中心機械暨航太學門規劃及訪評委員

15.

主辦國科會機械固力學門磨潤科技研討會(82年9月12日~13日)

16.

協辦2001 Conference on Electronic Contact and Connector, Chinese Culture University, Taipei,Dec. 6-7,2001

17.

Programme Planning Committee, 13th International Colloquium Tribology, Stuttgart/Ostfildern Germany, Jan. 15-17,2002

18.

主辦磨潤暨材料科技研討會(93年3月5日)

19.

2007~2009 主辦12項大小型國際學術研討會(Chairs)

20.

國際SCI 20餘種學術期刊論文審查委員

21.

國內10餘種學術期刊論文審查委員

22.

中華民國微系統暨奈米科技協會第六~九屆理事

23.

工研院前瞻計畫審查委員

24.

Editorial Board Member, "Modeling Isothermal Groundwater and Geothermal Systems", Germany.

25.

成大、清大等五校特聘教授及講座教授審查委員

26.

主持國家型奈米科技人才培育計畫

27.

中華電漿工程學會第2~5屆理監事

28.

國科會政府科技計畫績效評估複評委員暨主筆委員(94~103年度)

29.

工研院傑出研究獎審查委員

30.

國科會工程科技推展中心產學諮詢委員

31.

台灣奈米標準技術諮議會(TNSC)奈米標準技術第二工作組諮議委員

32.

工研院探索性創新前瞻計畫審查委員

33.

國科會工程處機械固力學門召集人(98~101年)

34.

中華民國力學學會理事(98~103年度)

35.

中華民國力學學會獎勵委員會委員暨論文委員會主任委員

36.

高雄市地方產業創新研發推動計畫(地方型SBIR)審查委員

37.

中國工程師學會高雄市分會候補理事(第25屆)

38.

中華民國優良廠商協會專案指導顧問

39.

數所大學工學院/機械工程系所諮詢委員會委員

40.

奈米國家型科技計畫審查委員(100~103年度)

41.

國立成功大學校務顧問(99年度)

42.

43.

44.

45.

46.

47.

48.

49.

50.

51.

國立成功大學校務諮詢委員(100~103年度)

美國機械工程師學會(ASME)台灣分會理事(99~103年度)

台灣磨潤科技學會理事(2012~2014年度)

教育部100年科技綱要計畫績效審查委員 

教育部顧問室先進設備人才培育計畫成果審查委員(101~103年度)

教育部能源國家型科技人才培育計畫及年度成果審查委員(102~103年度)

經濟部技術處法人科專計畫審查委員(100~103年度)

成功大學校教評會委員(102~103年度),機械系教評會委員

成功大學校務發展委員會委員(102~103年度)

四國際學術期刊 Editorial Board Member

 
 
榮譽

 

1.

九十九年度中華民國力學學會論文獎,指導博士班學生研究獲得固力材料組第二名中華民國力學學會99年11月

2.

中國工程師學會全國學生論文獎指導學生研究獲第二名中國工程師學會84年3月

3.

中國工程師學會成大分會學生論文獎指導學生論文獎獲:優等(第一名)佳作(第一名)成大83年11月

4.

國科會傑出研究獎研究成果傑出國科會83年4月

5.

國科會研究優良獎研究成果優良國科會81年8月

6.

中國機械工程會論文獎第三名中國機械工程學會78年11月

7.

中國機械工程學會指導博士班學生研究獲博士學位論文第二名中國機械工程學會84年10月

8.

國科會傑出研究獎研究成果傑出國科會85年4月

9.

成大獎牌傑出研究為校爭光成大85年11月

10.

國科會傑出優良獎研究成果傑出國科會87年4月

11.

國科會特約研究人員研究成果傑出晉升國科會89年8月

12.

中國機械工程學會碩士學位論文獎指導碩士班學生研究獲碩士學位論文獎第一名(以CMP研究獲獎)中國機械工程學會89年12月

13.

台灣應用材料公司八十九學年度「半導體科技菁英培植獎」指導碩士班學生研究論文獲獎台灣應用材料股份有限公司90年6月

14.

中國機械工程學會碩士學位論文獎指導碩士班學生研究獲碩士學位論文獎第二名中國機械工程學會90年12月

15.

國科會九十年度碩士論文獎指導碩士班學生論文獲機械工程碩士論文獎國科會91年1月

16.

國科會特約研究人員國科會91年8月

17.

國科會九十年度大學生專題計劃研究創作獎暑期指導大學生研究獲創作獎國科會91年10月

18.

九十一年度中國機械工程學會博士論文獎指導博士班學生研究獲博士論文獎佳作中國機械工程學會91年11月

19.

九十一年度中國機械工程學會碩士論文獎指導碩士班學生研究獲碩士論文獎第三名中國機械工程學會91年11月

20.

成大特聘教授成大92年1月

21.

九十二年中國機械工程學會博士論文獎指導博士班學生研究獲博士論文獎第一名中國機械工程學會92年12月

22.

九十二年度中國機械工程學會碩士論文獎指導碩士班學生研究獲碩士論文獎佳作中國機械工程學會92年12月

23.

第六屆機構與機器設計學術研討會指導博士班學生研究獲最佳論文獎中華民國機構與機器原理學會92年12月

24.

九十二年度科林科技論文獎指導碩士班學生陳昇照獲碩士論文獎台灣科林股份有限公司93年2月

25.

九十二年度科林科技論文獎指導碩士班學生陳冠維獲碩士論文獎台灣科林股份有限公司93年2月

26.

九十二年度工學院研究優良教師研究優良教師獎成大工學院93年6月

27.

國科會九十二年度大學生專題計劃研究創作獎暑期指導大學生研究獲創作獎國科會93年8月

28.

九十三年中國機械工程學會碩士論文獎指導碩士班學生研究獲碩士論文獎佳作中國機械工程學會93年12月

29.

國科會九十三年度大學生專題計畫研究創作獎暑期指導大學生研究獲創作獎國科會94年7月

30.

國科會計畫第一級主持人研究成果傑出國科會94年8月-98年7月

31.

九十四年中國機械工程學會博士論文獎指導博士班學生研究獲博士論文獎第一名中國機械工程學會94年11月

32.

第九屆力學會議學生論文獎指導博士班論文獲固力材料組第一名(94年度)中華民國力學學會94年11月

33.

國科會傑出特約研究員研究成果傑出國科會94年11月

34.

成大講座教授成大94年12月

35.

九十五年度中國機械工程學會博士論文獎指導博士班學生研究獲博士論文獎第二名中國機械工程學會95年11月

36.

九十七年度中華民國力學學會論文獎指導碩士班學生研究獲得固力材料組第三名中華民國力學學會97年11月

37.

美國機械工程師學會會士, ASME Fellow, 2008

38.

九十八年度中國工程師學會高雄市分會工程教授獎

39.

九十八年度中華民國力學學會期刊論文獎第二名98年11月

40.

九十九年獲成大李國鼎科技與人文講座榮譽學者獎,99年7月

41.

國科會九十八年度大學生參與專題計畫研究創作獎,暑期指導大學生研究獲創作獎,國科會99年8月

42.

Senior Editorship, Journal of Nanoscience Letters, 2010.

43.

Editorial Board Member, Current Nanoscience Journal 2010.

44.

九十九年度中國機械工程學會博士論文獎佳作中國機械工程學會99年12月

45.

九十九年度中華民國力學學會論文獎,指導博士班學生研究獲得固力材料組第二名,中華民國力學學會99年11月

46.

100年度中國工程師學會"傑出工程教授"獎,100年6月

47.

一百年度中國機械工程學會碩士論文獎,指導碩士班學生獲碩士論文佳作,100年11月

48.

Editorial Board Member, Advances in Nano Research, 2012.

49. 中華民國力學學會會士,STAM Fellow,2012
50. 102年度台灣磨潤科技學會優秀論文獎,指導博士班學生獲優秀論文獎,102年6月
51. 第三屆全研科技論文獎,指導碩士班學生獲論文獎,102年10月
 
專利

 

1.

國別:中華民國 專利名稱:改善材料表面作定性分析之方法 專利號碼:197743  發明人:林仁輝,陳冠維

2.

國別:中華民國 專利名稱:往復式訊號資料處理方法 專利號碼:090127254  發明人:林仁輝,朱孝業

3.

國別:中華民國 專利名稱:微型位移感測器 專利號碼:090125644  發明人:林仁輝,魏伯任

4.

國別:中華民國 專利名稱:原子力顯微術摩擦力量測雜訊消除方法 專利號碼: 發明人:林仁輝,陳冠維

5.

國別:美國 專利名稱:Process and Apparatus for Plating Copper on Particulate Graphite  專利號碼:US6398936B1  發明人:林清彬,林仁輝

6.

國別:中華民國 專利名稱:可程式化表面處理系統 專利號碼:095118051 發明人:林仁輝,陳冠維

7.

國別:中華民國 專利名稱:具有效冷晶片的滾珠螺桿裝置 專利號碼:新型第M452270號 新型創作人:李旺龍,藍毓傑,洪政豪,林仁輝,魏進忠,黃吉川

8.

國別:中華民國 專利名稱:複合式集光系統 專利號碼:發明第I395914號 發明人:王良德,鄒淵翔,曾昭富,沈聖智,林仁輝,張守進

 
 
著作

三、論文著作

A. 期刊論文

    1. Buckholz, R.H.*, Lin, J.F., and Pan, C.H., "The Role of Axial edge Effects and cavitation in Lubrication for- Short journal Bearings." , ASME. J. of Applied Mechanics, 1985, pp.67-273.
    2. Buckholz, R.H.*, and Lin, J. F, "The Effect of Journal Bearing Misalignment on Load and Cavitation for Non-Newtonian Lubricants. "J. of Tribology, ASME Trans., Sept. 1986, pp. 311-324.
    3. Lin, J.F.*, and Chuan, R.N, "Analysis of Flow Field in the Thin Films of a Hydrostatic Gas Bearing. "J. of the Chinese /Society of Mechanical Engs . Vol. 10, No.4, 1989, pp.311-324.
    4. Lin, J.F.*, and Chen, Y.N., "Isothermal Analysis of Wide Slider Bearing Operating in Laminar Inertial Flow " J. of CSME, Vol. 10, No.4, 1989, pp.265-274.
    5. Lin, J.F.*, Lin, T.R., and Jang, J.Y., "Elastohydrodynainic Lubrication of Line Contacts with a Non-Newtonian Lubricant. "Tribology International, Vol.22, No5, 1989, pp. 335-342.
    6. Lin, T.R.*, Lin, J.F., and Jang, J.Y., "Thermal Effects in Elastohydrodynamic Lubrication of Line Contacts, "J. of CSME, Vol.10, No4,1989, pp. 303-310.
    7. Lin, T.R.*, Lin, J. F., "Thermal- Effects in Elastohydrodynarnic Lubrication of Line Contacts Using a Non-Newtonian Lubricants," Tribology International, Vol.24, No.6,1991, pp. 365-372.
    8. Lin, J.F.*, Liu, S.W., and Lin, W.L., "Isothermal Analysis of Finite-Width, PartialArc Journal Bearing with new Upstream Boundary Conditions. Part I. "Tribology International, Vol. 23, Nol, 1990, pp. 27-34.
    9. Lin, J.F.*, and Wang, L.Y., " Thermohydrodynamic Analysis of Finite-Width, Partial-Arc Journal Bearing with Non-Newtonian Lubricants. Part II. "Tribology International, Vol.23, No.3, 1990, pp. 211-216.
    10. Lin, J. F.*, and Wang. D. S.,“ The Effect of Surface Roughness on Elastohydrodynamic Lubrication of Line Contacts.” Tribology International, Vol.24, No 1, 1990, pp. 51-62.
    11. Lin, J. F.*, Jou, J. C., and Lu, G. S., " Two-Dimensional Flows in Gas Hydrostatic Bearings in Thin Films of Variable Thickness Analyzed by Finite Element Method, " Tribology International, Vol.23, No5, 1990, pp. 351-360.
    12. Lin, J.F.*, and Chu, S.Y., "A Numerical Solution of Elliptic-Contact Elastohydrodynamic Lubrication of Rough Surfaces, "ASME, Journal of Tribology, Vol. 1 13, 1990, pp. 12-21.
    13. Lin, T.R., and Lin, J. F.*, "The Elastohydrodynamic Lubrication of Line Contacts with Pseudo-plastic Fluids, " Wear, (1990), pp.235-249.
    14. Lin, J.F.*, and Huang, S.C., "A Refined Model for the Thermal Hydrodynamic Lubrication Theory of High-Speed Rolling. Part I: Effects of Operating Conditions, "Tribology International, Vol.24, No.3, 199 1, pp. 1 51-161.
    15. Lin, J.F.*, and Huang, S.C., "A Refined Model for the Thermal Hydrodynamic Lubrication Theory of High-Speed Rolling. Part II: Effects of Material Properties, "Tribology International, Vol.24, No3, 199 1, pp. 163-172.
    16. Lin, T.R., and Lin, J.F.*, "Compressible Elastohydrodynamic Lubrication of Rolling and Sliding Contacts a Power Law Fluid, "Wear, 142 (1991), pp.315-330.
    17. Lin, J.F.*, Cheng, M.J. and Jang, J.Y., "The Tribological Behaviour of the Steel Rollers under Rolling-Sliding Contacts " Wear, 146 (1991), pp. 149-164.
    18. Jang, J.Y.*, Cheng, M.J., and Lin, J.F., "Adiabatic Solution of Finite-Width Journal Bearings with Rough Surfaces, " Tribology International, Vol.24, No6,. 1991, pp.373-380.
    19. Lin, J.F.*, Huang, T.K., and Hsu, C. T., "Evaluation of Lubricants for Cold Strip Rolling," Wear, 147 (1991), pp.79-91.
    20. Lin, J.F.*, Lee, A.Y., and Li, K. Y., "Friction and Lubrication Evaluation in Deep Drawing by an Eddy-Current Type Testing Machine, "STLE, Vol.35, No.4, 1992, pp.635-642.
    21. Lin, J.F.*, Wang, L.Y., and T.K. Huang, "Friction in Deep Drawing of Aluminum Sheet.” Wear, 156 (1992), pp. 189-199.
    22. Lin, J.F.* and Jone, R.C., "Analyses of Thermal Hydrodynamic Lubrication in a High-speed Rolling; Part I : the Effect of Roll's Elastic Deformation,"Tribology International, Vol.25, No.5, 1992, pp.329-339.
    23. Lin, J.F.*, and Homg, J.H., "Analyses of Thermal Hydrodynamic Lubrication in a High -Speed Rolling; Part II : the Effect of Non-Newtonian Viscosity Models," Tribology International, Vol. 25, no.5, 1992, pp.341-349.
    24. Jang, J.F., Lin, J.F.*, and Guan, T.C., "The Elastohydrodynamic Lubrication of Elliptical Contact with Non-Newtonian Lubricant, "The Chinese Journal of Mechanics, vol.8, no.3, 1992, pp.263-273.
    25. Lin, J.F.* and Lin, T.R., "Analysis of the Friction and Wear Mechanisms of Multilayered Plasma-Sprayed Ceramic Coating," Wear, 160 (1993) pp.201-212.
    26. Jang, J.Y., Guan, T.C. and Lin, J. F.*, "The Elastohydrodynainic Lubrication of elliptical Contact with Non-Newtonian Lubricant, "The Chinese Journal of Mechanics, vol.8, 1992, pp.263-273.
    27. Lin, J.F.*, Hong, J.H., and Li, K.Y., "The Effect of the EP Additive on the Tribological Behavior of Steel Rollers with Surface Irregularities," Wear, vol.169, 1993, pp.107-118 (NSC 83-0405E-006-024).
    28. Lin, J.F.*, and Hong, J.H., "The Analyses of the Tribological Behavior and Wear Mechanisms of Titanium Nitride Coating, "Wear, vol.171, 1993, pp.211-214.
    29. Lin, J.F.*, and Chen, Y.N., "Thermohydrodynamic Analysis of a Journal Bearing in a Turbulent Flow Regime, Pant I: Theory, "STLE, vol. 37 (1994), 4, pp.727-734.
    30. Lin, J.F.*, and Chen, Y.N., "Thermohydrodynamic Analysis of a Journal Bearing in a Turbulent Flow Regime, Pant II: Application, "STLE, vol.37 (1994), 4, pp.820-828.
    31. Lin, J.F.*, and Cheng, Y.N., "Tribological Reactions Generated on Ceramic Satellite Couples Contaminated by SiO2 Particles, "Wear, 176(1994), pp. 173-184.
    32. Lin, J.F.*, and Cheng, Y.N., "Tribological Reaction Generated on Ceramic-Satellite Couples under Dry Sliding Contact and Water- and Oil- Lubricated Conditions," Wear, 177(1994), pp.139-149. (NSC83-0405-EO06-340)
    33. Lin, J.F.*, Hong, J.H., and Li, K.Y., "The Effect of Surface Irregularities on the Tribological Behavior of Steel Rollers under Rolling-Sliding Contacts, "ASME, Journal of Tribology, 1994, vol. 116, pp.209-218.
    34. Lin, J. F.*, Hong, J.H., and Li, K.Y., "The Effect of Surface Roughness on Steel Roller Scuffing," Wear, vol.184,1995, pp.203-212. (N8C83-0405-E006-024)
    35. Lin, J. F.*, M.H.,Liu, and Wu, J. D., "Analysis of the Friction and Wear Mechanisms of Structural Ceramic Coatings. Part I: The Effect of Processing Conditions." Wear, 1994, vol. 194, pp.1-11.
    36. Lin, J.F.*, Liu, M.H., and Wu, J.D., "Analysis of the Friction and Wear Mechanisms of Structural Ceramic Coatings. Part II: the Effect of Operating Conditions and Substrate Material, Wear, 198 (1996), pp.7-14.
    37. Lin, J.F.*, Guu, Y.Y., and Shiau, T.N., "The Dynamic Responses and Stability Analyses of a Nonlinear Rotor-Bearing System with Residual Shaft Bow and Disk Skew." CSME, vol. 1 5, no.6, 1994, pp.595-605. (NSC80-0401 –E006-36)
    38. Lin, J.F.*, and Guu, Y.Y., "The Tribological Characteristics of Titanium Nitride Coatings-Part I: Coatings Thickness Effect. "Wear, vol.194, 1994, pp. 12-21.
    39. Lin, J.F.*, and Guu, Y.Y., "The Tribological Characteristics of Titanium Nitride Coatings-Part II: Comparisons of two Deposition Process." Wear, vol.194, pp.2229.
    40. Lin, J.F.*, and Chen, Y.N.," The Relationship between the Change in Stress Intensity Factor and Wear at Elevated Temperature for Ceramics." Wear, vol. 185 1995, pp. 131-139.
    41. Lin, J.F.*, and Yao, C.C., "Hydrodynamic Lubrication in a Turbulent Flow Regime and Wear in Face Seal, "ASME, Journal of Tribology, vol. 118, 1996, pp.589-600.
    42. Lin, J.F.*, and Chen, Y.N., "Tribological Reaction Generated on Ceramic-Stellite Couples under Unlubricated or Graphite- or CaF2-Lubricated Conditions." Wear, 1995.
    43. Lin, J.F.*, Chou, C.C., and Yang, J.W., "Fundamental Tribological Study of AISI 1045 Carbon Steel in Sliding Wear," ASME, Journal of Tribology, vol. 118, 1996, pp.728-739.
    44. Lin, J.F.*, Hong, J.H., and Li, K.Y., "Scuffing as Evaluated from the Viewpoint of Surface Roughness and Friction Energy," ASME, Journal of Tribology, vol.118, 1996, pp669-675.
    45. Lin, J. F.*, "A Study on 6061 Aluminum Alloy/ Solid Lubricant Composite Materials Used to Improve the Tribological Performances in Oil Lubrication and Dry Friction," Proceeding of International Tribology Conference, Yokohama, Japan, Oct. 1995.
    46. Lin, J. F.*, Guu, Y. Y., and Ai C. F., "The Tribological Characteristics of Titanium Carbonitride Coatings Prepared by Cathodic Arc Ion Plating Technique," Thin Solid Film, vol.287, 1996, pp.16-24.
    47. Guu, Y.Y., and Lin, J.F.*, "Comparison of the Tribological Characteristics for Titanium Nitride and Titanium Carbonitride Coating Films, "Surface and Coating Technology, vol.185, 1996, pp. 146-155.
    48. Lin, J.F.*, and Chou, C.C.,. "The Effect of Surface Chemistry in Lubrication on the Tribological Behavior of Steel Roller under Rolling-Sliding Contact," Tribotest Journal, vol.92, 1996, pp.205-234.
    49. Lin, J.F.*, Lian, J.C., and Li, K.Y., "Comparison of Tribological Characteristics between the Electroless Nickel Film as the Underlayer and Without it," Wear, 209, 1997, pp.199-212.
    50. Guu,Y.Y., Lin, J.F.*, and Ai, C.F., "The Tribological Characteristics of Titanium Nitride, Titanium Carbide Coatings," Thin Solid Films, 302, 1997, pp.193-200.
    51. Guu,Y.Y., Lin, J.F.*, and Ai, C.F., "Correlation between Three-Body Wear and Tribological Characteristics of Titanium Nitride, Titanium Carbonitride and Titanium Carbide Coatings, " Wear, 208, 1997, pp.147-154.
    52. Lin, J.F.*, Yung, Y.C., and Tsao, C.Y., "Tibological Performance of 6061 Aluminum Alloy/Graphite Material in Oil Lubrication and Dry Sliding," STLE, 41(1998), 2, pp.251-261. (NSC81-0401-E-006-360).
    53. Lin, J.F.*, Chou, C.C., and Chen, S.T., "Modelsfor Temperature-Kinetic Aspect of Friction and Wear in Oil Lubrication," ASME, Journal of Tribology, vol.121, 1999. pp.774-786.
    54. Chou, C.C., and Lin, J.F.*, "Application of the Response Surface Method to the Tribological Analysis of a Medium-Carbon Steel under Mild-Oxidational Wear," ASME, Journal of Tribology, vol.211, 1999, pp.185-197. (NSC83-0405-E-006-024).
    55. Guu, Y. Y., Lin, J. F.*, "Analysis of Wear Behavior of Tribological Carbonitride Coating," Wear, 210,1997, pp.245-254.
    56. Chou, C.C., and Lin, J. F.*, "Effect of Combination of Surface Roughness and Run In upon Line-Contact Oil Lubrication," Instn. Mech. Engrs., Lubrication of Engineering Tribology , vol.211, Part J,1997, pp.209-222.
    57. Lin, J.F.*, and Chou, C.C., "The Response Surface Method and the Analysis of Mild Oxidational Wear, "Special Issue of Tribology International "Tribology International, 35, 2002, pp.771-785.
    58. Chen, U. C., Liu, Y. S., and Lin, J. F.*, "The Effect of the Additive Concentration in Emulsions to the Tribological Behavior of a Cold Rolling Tube under Sliding Contact” Tribology International, 35, 2002, pp.309-320.
    59. Wei, J.H., Lin, J.F.*, Jiang, T.H., and Ai, C.F., "Tribological Characteristics of Two Ceramic Films. PartⅠ:The Effect of Coating Sequence on Material and Mechanical Properties," Thin Solid Films, vol.381(1), 2001, pp.94-103.
    60. Wei, J. H., Lin, J. F.*, Jiang, T.H., and Ai, C.F., "The Tribological Characteristics of Two Ceramic Films. PartⅡ:The Effect of Coating Sequence on Tribological Properties," Thin Solid Films, vol.381(1), 2001, pp104-118.
    61. Chu, H. Y., Lin, J. F.*, and Jang, Y. H., "Experimental Analysis on the Tribological Behavior of Boron Nitride in Aluminum Matrix Composites in Recipocating Motion," CSME, vol.22(5), 2001, pp.377-389.
    62. Liao, N.T., and Lin, J.F.*, “A New Method for the Analysis of Deformation and Load in a Ball Bearing with Variable Contact Angle,” ASME, J. of Mechanical Design. vol.123, 2001, pp. 304-312.
    63. Liao, N.T., and Lin, J.F.*, “Ball Bearing Skidding under Radial and Aaxial Loads” Mechanism and Machine Theory, 37, 2002, pp.91-113.
    64. Chou, C.C., and Lin, J.F.*, A New Approach to the Effect of EP Additive and Surface Roughness on the Pitting Fatigue of a Line-Contact System,” ASME, J. of Tribology, vol.124, 2002. pp.245-258.
    65. Liao, N.T. and Lin, J. F.*, “The Analysis of High-Speed Ball Bearing with Misalignments by a New Method, ” ASME, J. of Mechanical Design, vol.126, 2004, pp.370-374.
    66. Chu, S.Y., and Lin, J.F.*, “Experimental Analysis of the Tribological Behavior of Electroless Nickel-Coated Graphite particle in Aluminum Matrix Composites under Reciprocating Motion,” Wear, vol.239, 2000, pp126-142.
    67. Chen, U.C., Lin, J. F.*, Liu, Y. S., and Chang, C. C., “The Effect of the Additive Concentration in Emulsions to the Tribological Behavior of a Cold Rolling Tube under Sliding Contact,” Tribology International, 35, 2002, pp.309-320.
    68. Lin, J.F.*, Chang, J.C., and Chen, C.I. Ai, C. F., “The Effect of Under-Layers and Pre-test Temperature on the Tribological Characteristics of TiN Films Rubbing against Steel,” Wear, 256(2004), pp. 252-267.
    69. Chu, C. H., Chung, H. H., Lin, J. F.*, Chou, C. C., “The Effect of Strain Hardened Layer on Pitting Formation during Rolling Contact,” Wear, vol. 249, 2001, pp. 109-116.
    70. Tseng, W. T., Kuo, P. L.*, Liao, C. L., Lu, R., Lin, J. F., “Novel Polymeric Surfactants for Improving Chemical Mechanical Polishing Performance of Silicon Oxide,” Electrochemical and Solid-State Letters, 4(5) G42-G45, 2001.
    71. Lin, J. F.*, Wei, C. H., Tu, C. C., Lu, S. C., “Effect of Operating Conditions and Solution Acidity on the Tribological Behavior of Dialectic Thin Film Wafers in Chemical Mechanical Polishing,” Proceedings of International Tribology Conference, Nagasaki, Japan, vol.3 2001, pp.2291-2296.
    72. Lin, J. F.*, and Chou, C. C., “The Response Surface Method and the Analysis of Mild Oxidational Wear,” Tribology International, 35, 2002, pp.771-785.
    73. Lin, J. F.*, Chern, J. D., Chang, H. Y., Kuo, P. L., Tsai, M. S., “Analysis of the Tribological Mechanisms Arising in the Chemical Mechanical Polishing of Copper-film Wafers,” ASME J. of Tribology, vol.126, 2004, pp.185-199.
    74. Liao, N.T., Lin, J.F.*, “A New Method Developed for the Analysis of Ball Bearing Fatigue Life Considering Variable Contact Angles,” STLE, 2003, vol.46, pp.435-446.
    75. Wei, J. C., Lin, J. F.*, “Kinematic Analysis of the Ball Screw Mechanism Considering Variable Contact Angles and Elastic Deformations,” ASME, Journal of Mechanical Design, vol.125, pp.717-733, 2003.
    76. Ni, S. C., Kuo, P.L.*, and Lin, J.F., “Antiwear Performance of Polysiloxane-Containing Copolymers at Oil/Metal Interface under Extreme Pressure,” Wear, vol.253, n7-8, 2002, pp862-868.
    77. Liao, N. T. and Lin, J. F.Z*, “A New Method for the Analysis of the Stiffness Matrix of Ball Bearings with Misalignments,” ASME, Journal of Mechanical Design, vol.126, 2003, pp.370-374.
    78. Lin, J. F.*, Ouyang, Y. L., Chen, S. C., Shen, S. C., Shen, Y. X., and Tsai, M. S., “Analysis of the Efect of Abrasive Particle Size, on the Tribological Mechanisms Arising in the Chemical Mechanical Polishing of Copper-Film Wafers,”CSME, vol.24, no.4 pp.353-376, 2003.
    79. Lin, J. F.*, Wei, P. J., Pan, J. C., and Ai, C. F.., “Effect of Nitrogen Content at Film Layer and Film Thickness on Nanohardness and Young’s Modulus of Hydrogenated Carbon Films,” Diamond and Related Materials, vol.13, pp.42-53, 2004.
    80. Lin, J. F.*, Wan, Z. C., Wei, P. J., Chu, H. Y., and Ai, Ci. F., “Effect of Nitrogen Content on Mechanical Properties and Tribological Behaviors of Hydrogenated Amorphous Carbon Films Prepared by Ion Beam Assisted Chemical Vapor,” Thin Solid Films, 466(2004), pp.137-150.
    81. Lin, J. F.*, Wei, J. C., Yang, Y. K., “The Effects of Carbon Films with Different Film Tickness and Nitrogen Content on Specimen Mechanical Properties, Scratch Critical Load, Adhesion Work, and Tribological Behavior” Diamond and Related Materials, vol. 13/10, 2004 pp.1895-1906.
    82. Lin, J. F.*, Chen K. W., Wei, C. C., and Ai, C. F., “The Effects of Differing Nitrogen Implantation Conditions on Penetration Depth, Mechanical Properties, and Tribological Behavior of Plasma-Nitrided AISI304 Stainless Steel,” Surface and Coatings Technology, vol. 197, 2005, pp.28-38.
    83. Chung J. C. and Lin, J. F.*, “A Fractal Model Developed for Elliptical Elastic-Plastic Asperity Microcontacts of Rough Surfaces,” ASME, Journal of Tribology, vol.126, 2004, pp 646-654.
    84. Lin, L. B., and Lin J. F.*, “An Elastoplastic Microasperity Contact Model for Metallic Materials,” ASME J. of Tribology, vol.127. 2005, pp.666-672.
    85. Wei, P. J., Lin, J. F.*, “A New Method Developed to Evaluate the Hardness and Elastic Modulus of a Coating-Substrate System,” Surface & Coatings Technology, vol.200,2005, pp.2489-2496.
    86. Lin, J. F.*, Chung, J. C., Chen, J. W., Liu, T. C., “Thermal Analysis of the Transient Temperatures Arising at the Contact Spots of Two Sliding Surfaces” ASME J. of Tribology, vol.127, 2005, pp.694-704.
    87. Ho, C. J., Chu, S. Y., and Lin, J. F., “Heat Transfer Characteristics of a rectangular natural circulation loop containing Solid-liquid phase-change material suspensions,” International Journal of Numerical Methods for Heat and Fluid Flow, vol.15, 2005, pp.441-461.
    88. Lin, J. F.*, Lin J. W., and Wei, P. J., “Thermal Analysis for Graphitization and Ablation Depths of Diamond Films,” Diamond and Related Materials, vol.15, 2006, pp.1-9.
    89. Chung, J. C. and Lin, J. F.*, “Variations in Fractal Properties and Non-Gaussian Distributions of Microcontact between Elastic-Plastic Rough Surfaces with Mean Surface Seperation,” ASME J. of Applied Mechanics, vol. 73, 2006, pp.143-152.
    90. Kuo, W. L., Lin, J. F.*, “Thermal Analysis of the Contact Temperature Arising in the Grinding Zone,” J. of Manufacturing Science and Engineering, vol.31, 2006, pp.268-277.
    91. Wei, P. J., and Lin, J. F.*, “A New Model Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test,” ASME, J. of Engineering Material and Technology, vol.129, 2007, pp.284-292.
    92. Lin, J. L., and Lin, J. F.*, “The Gray Theory Applied to the Tribological Analyses of a-C:H(N) coating Films Prepared by Differing the Nitrogen Content and Film Thickness,” Journal of Advanced Manufacturing Technology, vol.27, 2006, pp.845-853.
    93. Lin, J. F.*, Chen, S. C., Ouyang, Y. L., and Tsai, M. S., “Analysis of the Tribological Mechanisms Arising in the Chemical Mechanical Polishing of Copper-film Wafers When Using a Pad with Concentric Grooves,” ASME, Journal of Tribology, vol.128, 2006, pp.445-459.
    94. Lin, L. P., and Lin, J. F.*, “A New Method for Elastic-Plastic Contact Analysis of a Deformable Sphere and a Rigid Flat,” ASME J. of Tribology, 2005, vol.128, 2006, pp.221-229.
    95. Liao, N.T., Lin, J.F.*, “Rolling-Sliding Analysis in Ball Bearing Considering Thermal Effect,” STLE, vol.49, 2006, pp.1-16.
    96. Liu, J. L., and Lin, J. F.*, “A New Microcontact Model Developed for Variable Fractal Dimension, Topothesy, and Probability Density Function of Asperity Heights,” ASME, J. of Applied Mechanics, vol.74, 2007, pp.603-613.
    97. Lin, J. F.*, and Liou, J.L., “Elastic-Plastic Microcontact Analysis of a Sphere and a Flat Plat,” Journal of Mechanics, vol.23, 2007, pp.341-351.
    98. Lin, J. F.*, Tai, C. K., and Lin, S. L., “Theorefical and Experimental Studies for Nano-Oxidation of Silicon Wafer by AC Atomic Force Microscopy, ” Journal of Applied Physics, vol.99, 2006, pp.054312-1~054312-11.
    99. Liou, J. L., and Lin, J. F.*, “A New Method Developed for Fractal Dimension and Topothesy Varying with the Mean Seperation of Two Contact Surfaces,” ASME, J. of Tribology, vol.128, 2006, pp.515-524.
    100. Lin, J. F.*, Fang, T. H., and Liu, C. L., “Atomistic Simulations of Hard and Soft Films under Nanoindentation,” Materials Science Engineering A, vol.452-453, 2007, pp.135-141.
    101. Lin, J. F.*, Wu, C. D., Fang. T. H., “Molecular Dynamic Simulation and Characterization of Self-Assembled Monolayer under Sliding Friction, ” Computational Material, vol.39, 2007, pp.808-816.
    102. Lin, J. F.*, Xie J. Q., Wei, C. C., Chung J. C., Li, M. Y., Chen, K. W., Ai, C. F., “The Effects of Implantation Temperature and Volume Flow Rate Ratio of Nitrogen and Hydrogen on Nitrogen Concentration Distribution, Mechanical Properties, Fatigue Life, Fracture Toughness, and Tribological Behavior of Plasma-Nitrided P20, 718 and 420 Steels,” Surface and Coatings Technology, 2006, vol.201, 2007, pp.5912-5924.
    103. Lin, J.F.*, Wei, P. J., Tai, C. K., Chung, J. C., “Numerical and experimental studies for the anisotropic etching of silicon with the AFM oxide lines as masks,” Microelectronics Engineering, vol.85, 2008, pp.143-150.
    104. Lin, J. F.*, Fang. T. H., Houng, K. H., and Wu, C. D., “Contact and Frictional Behavior of Rough Surfaces Using Molecular Dynamics Combined with Fractal Theory,” Computational Materials Science, 40(4)2007, 480~484.
    105. Wu, C. D. and Lin, J. F.*, ‘Multiscale Particel Dynamics on Nanoimprint process,” Applied Physics A, vol.91, 2008, pp273-279.
    106. Lin, L. P. and Lin, J. F.* “An Elliptical Elastic-Plastic Microcontact Model Developed for an Asperity in Contact with a Smooth Rigid Flat,”ASME J. of Tribology, vol.129(4), 2007, pp.772-782.
    107. Liu, J. L., and Lin J. F.*, “A Method for Determining the Non-Gaussian Probabity Density Functions of Asperity Height for Two Contact Surface Conditions,”ASME J. of Applied Mechanics, vol.74(4), 2007, pp.603-613.
    108. Liou, J. L. and Lin, J. F.*, “A Microcontact Non-Gaussian Surface Roughness Model Accounting for Elastic Recovery,” ASME J. of Applied Mechanics, vol.75, 2008, pp.031015-1~031015-13.
    109. Han, C. F., and Lin, J. F.*, “A New Model to Evaluate the Contact Area Arising during nano-Indentation Test with Pile-up Behavior of Metel Materials,” IEEE Transac. on Nanotechnology, vol.7, 2008, pp.256-265.
    110. Han, C. F. and Lin, J. F.*, ”Modeling to evaluate the contact areas of hard materials during the nano-indentation tests,” Sensor and Actuator A-Physical, vol.147(1), 2008, pp.229-241.
    111. Wu, C. D, Lin, J. F.*, Fang, T. H., Lin, H. Y., and Chang, S. H., “Multiscale Particle Dynamics on Nanocontact and Sliding Friction,” J. of Nanoscience and Nanotechnology, vol.9(5), 2009, pp3295-3300.
    112. Wei, P. J., Tsai, P. W., and Lin, J. F.*. “Microcontact Analysis for the Initial Contact in Nonoindentation Tests,” Tribology International, vol.41, 2008, pp.1247-1254.
    113. Liou, J. L., Wei, P. J., Liang, W. L., Ai, C. F., Lin, J. F.*, “Analyses of the Work Required to Delaminate a Coating Film from a Substrate under Oscillating Load Conditions and the Film-Substrate Contact Behavior after Delamination,” J. of Applied Physics, vol.103, 2008, p.103505-9.
    114. Wei, P. J., Shen, W. X. and Lin, J. F.*, “Analysis and Modeling for Time-Dependent Behavior of Polymers Exhibited in Nanoindentation Tests,” J. Non-Crystalline Solids, vol.354, 2008, pp.3911-3918.
    115. Wei, P. J. and Lin, J. F.*, “Determination for Elasticity and Plasticity from Time-Dependent Nanoindentations,” Mater. Sci. Eng. A, vol.496, 2008, pp.90-97.
    116. Wei, P. J., Wang, Y. C. and Lin, J. F.*, “Retardation of Indentation Cyclic Creep Exhibited in Metal Alloys,” J. of Mater. Res., vol.23, 2008, pp.2650-2656.
    117. Shen, Y. X. and Lin, J. F.*, “Effect of Fluctuations in the Brush Conformation on the Interaction between Polymer Brushers in a Good Solvent, ” ASME, J. of Applied Mechanics, vol.75(5), 2008, pp.051009 (1-7).
    118. Shen, Y. X. and Lin, J. F.*, “An Integrated Simulation and Statistical Technique for Investigated the Effect of Interpenetration on the Interaction between Polymer Brushes in a Good Solvent,” J. of Applied Physics A, vol.94, 2009, pp.195–209.
    119. Han, C. F., Wu, B. H. and Lin, J. F*, “Theoretical modeling developed to evaluate the hardness and reduced modulus for the Ca-Si composite film using nanoindentation tests,” Nanotechnology, vol.19, 2008, pp.325710-325722.
    120. Liou, J. F., Wei, P. J., Liang, W. L., Ai, C. F., and Lin, J. F.*, ”Analyses of the Work Required to Delaminate a Coating Film from a Substrate under Oscillating Load Conditions and the Film-Substrate Contact Behavior after Delamination,” accepted by Virtual J. of Nanoscale & Technology, June 2, 2008.
    121. Wei, P. J., and Lin, J. F.*, “Analysis Based on Microcontact Mechanism for the Roughness Dependent Stick-Slip Motion,” Wear, vol.266, n 1-2, 2009, pp.310-315.
    122. Wei, P. J., and Lin, J. F.*, “Modified Method for Continuous Stiffness Measurement,” J. of Material Research, vol.24, 2008, pp.599-606.
    123. Lee, C. J., and Lin, J. F.*, “Ferrule Fabrication for the MT-Type Optical Fiber Connector Using the Microinjection Process,” J. of Micromechanics and Microengineering, vol.18, 2008, pp.115026-1~10.
    124. Shen, Y. X., Wei, P. J., and Lin, J. F.*, “Intitial and Adhesive Contact between a Diamond Indenter and Polydimethy lisloxane,” Review of Scientific Instruments, vol.79, 2008, pp.096106-1~3.
    125. Chen, S. C., and Lin, J. F.*, “Detalied Modelling the Adhesion Foce between an AFM Tip and a Smooth Flat Surface under Different Humidity Levels,” J. of Micromechanics and Micreengineering, vol.18, 2008, pp.115006-1~7.
    126. Shen, Y. X., Wei, P. J., and Lin, J. F.*, “Intitial and Adhesive Contact between a Diamond Indenter and Polydimethy Lisloxane,” Virtual Journal of Nnoscale Science & Technology, issued on Oct. 6, 2008.
    127. Wu, C. D., Lin, J. F.*, Fang, T. H., Lin, H. Y., and Chang, S. H., “Effects of a Self-Assembled Monolayer on the Sliding Friction and Adheson of an Au Surface,” Applied Physics A-Materials Science & Processing, vol.91, No.3, 2008, pp.459-466.
    128. Tai, F. C., Lee, S. C., Wei, C., Lin, J. F., “Thermal Treatment Effects on Hard and Soft Films Measured by Nanoindentation Test”, J. of Mater. Res, vol.24, 2008, pp.1064-1074.
    129. Shen, Y., X., and Lin, J. F.*, “An Integrated Simulation and Statisitical Technique for Investigating the Effect of Interpenetration Polymer Brushes in a Good Solvent,” selected for inclusion in an issue by Spriger Author Services (DOI:10.1007/S00339-008-4733-6), 2008.
    130. Liou, J. L.*, and Lin, J. F., “A Microcontact Model Feveloped for Asperity Heights with a Variable Profile Feactal Dimension, Topthesy and Non-Gaussian Distribution,” J. of Mechanics, vol.25, 2009, pp. 103-113.
    131. Han, C. F., Wu, B. H., Huang, C. Y., and Lin, J. F.*, “Determination of the Strain Energy Release Rate for C/a-si Composite Film Produced in Nanoindentation Tests” J. of Applied Physics, vol.105, 2009, pp.023523 1-11.
    132. Wei, P. J., Liang, W. L., Lin, J. F.*, Ai, C. F., “A New Method to Determine Strain Energy Release Rate of Interface via Force-Depth Data of Nanoindentation Tests,” Nanotechnology 20, 2009, 025701, pp1-7.
    133. Wei, P. J., Chen, S. C., and Lin, J. F.*, “Adhesion Force and Contact Angles of Water Strider Legs,” Langmuir, vol.25, 2009, pp.1526-1528.
    134. Chen K. W. and Lin, J. F.*, “The Study of Adhesion and Nanomechanical Properties of DLC Films Deposited on Tool Steels,” Thin Solid Films, vol.517, 2009, pp.4916-4920.
    135. Wei, J. C.*, Lin, J. F., Hong, J. H., “Analysis of a Ball Screw with a Preload and Lubrication,” Tribology International, vol.42, 2009, pp.1816-1831.
    136. Shen, Y. X., Wei, P. J., and Lin, J. F.*, “Modified Method Developed for the Contact-Induced Adhesion in Indentation,” J. of Material Research, vol.24, 2009, pp.1795-1802.
    137. Han, C. F., Wu, B. H., Huang, C. Y., and Lin, J. F.*, “Determination of the Strain Energy Release Rate for Composite Film Produced in Nanoindentation Tests," selected in Feb. 9. 2009 issue of Virtual Journal of Nanoscale Science & Technology.
    138. Chen, S. C., Wei, P. J. and Lin, J. F.*. "A Model Developed for the Adhesion Forces Formed between an Atomic Force Microscopy Tip and a Rough Surface under Different Humidity Levels," Japanes Journal of Applied Physics, vol.48, 2009, 055001-1~5.
    139. Wu, C. D., Lin, J. F.*, and Fang, T. H., “Molecular Dynamics Simulations of the Roller Nanoimprint Process : Adhesion and Other Mechanical Characteristics, ” Nanoscale Research Letters, vol.4, 2009, pp.913-920.
    140. Chen, K. W., and Lin, J. F*., Tsai, W. F., Ai, C. F., “Plasma Immersion Ion Implantation Induced Improvements of Mechanical Properties, Wear Resistance, and Adhesio of Diamond-Like Carbon Films Drposited on Tool Steel.” Surface and Coating Technology, vol.204, 2009, pp.229-236.
    141. Wu, C. D., Fang, T. H., Houng, J. H., and Lin, J. F.*, “Nanotribological Behavior of Diamond Surfaces Using Molecular Dynamics with Fractal Theory and Experiments,” Current Applied Physics, vol.10, 2010, pp266-271.
    142. Wu, C. D., Fang, T. H., Houng, J. H., and Lin, J. F.*, “Nanotribological Behavior of Diamond Surfaces Using Molecular Dynamics with Fractal Theory and Experiments,” Current Applied Physics, vol.10, 2010, pp266-271.
    143. Kao, M. T., and Lin, J. F.*, “Electrical Properties of AlNx/Al/Mo Composite Film Prepared for Use in Thin-film Transistors”, Thin Slid Films, vol.518, 2010, pp.3917-3922.
    144. Wu, C. D., Lin, J. F.*, and Fang, T. H., “Coarse Particle Dynamics Applied to the Nanocontact,“ IEEE Nanotechnology Magazine, vol.3, 2009, pp.9-15.(highlighted as the cover page)
    145. Liou, J. L., Tsia, C. M, Lin, J. F.*, “A Mirceocontact Model Developed for Sphere- and Cylinder-Based Fractal Bodies in Contact with a Rigid Flat Surface,” Wear, vol.218, 2009, pp.431-442.
    146. Tsia, C. M., Liou, J. L., Lin, J. F.*, “The Mirceocontact Model Developed for Sphere- and Cylinder-Based Fractal Bodies in Contact with a Rigid Flat Surface,” vol.268, Wear, 2009, pp.431-442.
    147. Liou, J. L.*, Lin, J. F., “A Modified Fractal Microcontact Model Developed for Asperity Heights with Variable Morphology Parameters,” Wear, vol.268, 2010, pp.133-144.
    148. Han, C. F., Huang, C. Y., Wu, B. H., Lin, J. F.*, “The Interfacial Transition of C/Si Composite Film and Si-Substrate Evaluated to Predict the Pop-In behavior in Nano indentation,” IEEE Transactions on Nanotechnology, vol.3, 2011, pp363-370.
    149. Han, C. F., Wu, B. H., Huang, C. Y., Lin, J. F.,*, “The Nanoindentation Applied to Predict the Interface Delamination for the C/a-Si Composite Film,” Journal of Applied Physics, vol.106, 2009, pp.0835171-1~083517-7.
    150. Wei, P. J., Wu, C. J., Lin, J. F.*, “Reflectivity of Etched Silicon Surface with Pyramids-Part I : Theoretical Model and Its Predictions,” J. of Micromechanics and Microengineering, vol.19, 2009, pp.115015-115018.
    151. Wei, P. J., Wu, C. J., Lin, J. F.*, “Reflectivity of Etched Silicon Surface with Pyramids-Part II : Experimental Results,” J. of Micromechanics and Microengineering, vol.19, 2009, pp.125019-125024.
    152. Wu, C. D., Fang, T. H., and Lin, J. F.*, “Nanomechanics and Nanotribological Characterization of Self-Assembled Monolayer for Nansystems,” Chapter in Advances in Nanotechnology, Nova Science Publishers, New York, 2009(ISBN : 978-1-60741-731-6) (Invited Chapter)
    153. Wu, C. D., Fang, T. H., and Lin, J. F., “Formation Mechanism and Mechanics of Dip-Pen Nanolithorgraphy Using Molecular Dynamics,” Langmuir, Vol.26, pp.3237-3241, 2010.
    154. Chu, H. Y., Hsu, W. C., and Lin, J. F.*, ”The Anti-Scuffing Performance of Diamond Nano-Particles as an Oil Additive,” Wear, Vol.268, pp.960-967, 2010.
    155. Chen, K. W., and Lin, J. F.*, “The Study of Loading Rate Effect of a Cu-Based Bulk Metallic Glass during Nanoindentation,” J. of Alloys and Compounds, Vol.504S, 2010, pp.S69-S73.
    156. Hsu, W. C., Chu, H. Y. and Lin, J. F.*, “The Scuffing Mechanism Occurred during Oil-Lubricated Blocks- on- Ring Test with Diamond Nanoparticles as a Oil Additive, ” Wear, vol.268, issues 11-12, 12 May 2010, pp.1423-1433.
    157. Chen, K. W., and Lin, J. F.*, “Investigation of the Relationship between Primary and Secondary Shear Bands Induced by Indentation in Bulk Metallic Glasses,” Int. J. of Plasticity, vol.26, November 2010, pp.1645-1658.
    158. Han, C. F., and Lin, J. F.,*, “The Model Developed for Stress-induced Structural Phase Transformations of Micro-Crystalline Silicon Film,” Nano-Micro Lett. 2, 2010, pp. 68-73.
    159. Jian, S. R., Li, J. B., Chen, K. W., Jang J. S. C., Jang J. Y., Wei P. J., and Lin J. F., “Mechanical Responses of Mg-Based Bulk Metallic Glasses,” Intermetallics, vol.18, issues 10, October 2010, pp. 1930-1935.
    160. Peng, C. C., Chung, C. K., and Lin, J. F.*, "Formation of Microcrystalline Silicon Films Using Rapid Crystal-Aluminum Induced Crystallization under Low-Temperature Rapid Thermal Annealing," Thin Solid Films, vol. 518, issues 23, 30 September 2010, pp.6966-6971.
    161. Chung, C. J.*, Wei, C. L., Hsieh, P. T., Huang, C. Y., Lin, J. F., Chen, Y. C., and Cheng, C. C., “Synthetic Properties of the c-axis Tilted A/N Thin Films,” Material Science Forum, Vols. 654-656, 2010, pp.1780-1783.
    162. Lee, C. J. and Lin, J. F.*, “Lens Designs by Ray Tracing Analyses for High-performance Reflection Optical Modules,” J. of Optics, vol. 12, issues 9, 2010, 095501(9pp).
    163. Peng, C. C., Chung, C. K., and Lin, J. F.,* “Effect of a Native Oxide Layer on the Mobility and Void of Aluminum-Induced Crystallization of Amorphous Silicon, ” J. of the Electrochemical Society, vol.157(12), 2010, pp.260-268.
    164. P. J. Wei, Y. X. Shen, T. F. Lin, J. F. Lin*, “Investigation of Enhanced Viscosity of Squeezed Liquids Affected by Solid-Liquid Absorptiveness via Nanoindentation Technique,” Micro Nano Letters, vol.6, 2011, pp9-12.
    165. Chen, K. W., Jian. S. R., Wei, P. J., Jang J.S.C., Lin, J. F.*, “A Study of the Relationship between Semi-Circular Shear Bands and Pop-ins Induced by Indentation in Bulk Metallic Glasses,” Intermetallics, vol.18, 2010, pp1572-1578.
    166. Wei, C. C.*, Horng, J. H., and Lin, J. F., “Kinematical Analyses and Translation Efficiency of a Preloaded Ball Screw operating at High Rotational Speeds”, accepted by Mechanism and Machine Theory, 2010.
    167. Lin, C. C., Yin, T. I., Lin, Y. D., Lin, T. I., Chen, Y. T., Lin, J. F., Wu, H. L., Chang, H. C.*, “Study on Mechanical Properties of Thrombomodulin-transfected Cancer Cells by Atomic Force Microscopy,” J. of Medical and Biological Engineering, Vol.30(5), 2010, pp.313-320.
    168. Wu, C. D.*, Fang, T. H. and Lin, J. F., “An investigation of the Effects of Polymethylmethacrylate Orientation and Antistiction Layer on the Nanoinprint Process Using Molecular Dynamics” by Advanced Science Letter, vol.4, pp.36-43(8), 2011.
    169. Wei, P. J., Chio, S. B., Liang, W. L., and Lin, J. F.*, “Determining Buckling Strain Energy Release Rate through Indentation-Induced Delamination,” Thin Solid Films, vol.519, 2011, pp4889-4893.
    170. Wei, C. C.*, Horng, J. H., and Lin, J. F., “Analysis and Experiment of Removla Performance with Various Concentric Grooves on Pads in Chemical Mechanical Polishing”, Wear, vol.270, 2011, pp.172-180.
    171. Li, T. C., Wu, B. H., and Lin, J. F.*, “Effects of Pre-strain Applied at a Polyethylene Terephthalate Substrate before the Coating of TiO2 Film on the Coating Film Quality and Optical Performance,” Thin Solid Films, vol.519, 2011, pp7875-7882.
    172. Nguyen, H. H., Wei, P. J., and Lin, J. F.*, “Electric Contact Resistance for Monitoring Nanoindentation-induced Delamination,” Adv. Nat. Sci.: Nanosci. Nanotechnol., vol.2, 2011, pp015007-015010.
    173. Peng, C. C., Chung, C. K., and Lin, J. F.*, “Effects of Annealing Conditions and Tickness Ratio of Si/Al Films on the Metal-Induced Si Crystallization of Si/Al/Si/SiO2/Glass Specimens,” Surface and Coating Technology, vol.205, 2011, pp.4672-4682.
    174. Li, T. C., Hsieh, P. T., and Lin, J. F.*, “Effects of Pre-strain Applied at a Polyethylene Terephthalate Substrate before the Coating of Al-doped ZnO Film on Film Quality and Optical and Electrical Properties,” Ceramics International, vol.37, 2011, pp2467-2476.
    175. Peng, C. C., Chung, C. K., and Lin, J. F.*, “Effects of Al film thickness and annealing temperature on the aluminum-induced crystallization of amorphous silicon and carrier mobility,” Acta Materialia, vol.59, 2011, pp.6093-6102.
    176. Wu, C. D., Fang, T. H.*, and Lin, J. F., “Effect of Chain Length of Self-Assembled Monolayers in Dip-Pen Nanolithography Using Molecular Dynamic Simulations, ” J. of Colloid and Interface Science, vol.361, 2011, pp.316-320.
    177. Jang, J. S. C*, Chen, K. W., Lin J. F., “Plasticity Improvement of ZrCu-based Bulk Metallic Glass by Ex Situ Dispersed Ta Particles,” Materials Science & Engineering A, vol.528, 2011, pp.8244-8248.
    178. Kao, M. T. and Lin, J. F*. “Effect of Deposition Conditions of the Al Film in Al/Glass Specimens and Annealing Conditions on Internal Stresses and Hillock Formations,” Thin Solid Films, vol.520, 2012, pp.5353-5360.
    179. Nguyen, H. H., Wei, P. J., Lin, J. F., “Determination of Residual Stress of Hard Film/Soft Substrate Specimens via Unloading Results of Nanoindentation Tests,” Advanced Materials Research, vol.328-330, 2011, pp.843-848.
    180. Chu, H. Y., Lin, J. F., Chiu, Y. C., Chang, H. C., “The Tungsten Density Distribution and Tribological Performance Analysis of Carburized Medium Carbon Steel with Tungsten Ion Implantation,” Advanced Materials Research, vols.328-330, 2011, pp.906-909.
    181. Han, C. F., Lin, J. F., “Stress-Induced Phase Transformations of Micro-Crystalline Silicon Films Arising at Nanoindentations,” Advanced Materials Research, vol.328-330, 2011, pp.910-914.
    182. Han, C. F., Wu, B. H., Chung, C. J., Chung, S. F., Li, W. L., Lin, J. F.*, “Stress-Strain Analysis for Evaluating the Effect of the Orientation of Dentin Tubules on Their Mechanical Properties and Deformation Behavior,” J. of the Mechanical Behavior of Biomedical Materials, vol.12, 2012, pp.1-8.
    183. Li. T. C., Chang, C. S., Liang, W. L., Tsai, W. F., Ai, C. F., Lin, J. F.*, “Method for the Formation of Cylindrical Current and Its Application to Evaluate Electrical Resistivity, ” JINST, vol.7, 2012, pp.07013-07027.
    184. Li, T. C., Wu, B. H., Lin, J. F.*, “Effects of Prestrain Applied to a Polyethylene Terephthalate Substrate before the Coating of Al-doped ZnO Film on Film Quality,  Electrical Properties, and Pop-in Behavior during Nanoindentation, ”The IEEE/ASME Journal of Microelectromechanical Systems, vol.21, no.5, 2012, 2012, pp.1059-1070.
    185. Wu, C. D., Fang, T. H.*, Lin, J. F., “Atomic-Scale Simulation of Material Behaviors and Tribology Properties for FFC and BCC Metal Films,” Materials Letters, vol.80, 2012, pp.59-62.
    186. Wu, C. D.*, Fang T. H., Lin, J. F., “Effects of Tip-Substrate Gap, Deposition Temperature, Holding Time, and Pull-Off Velocity on Dip-Pen Lithography Investigated Using Molecular Dynamics Simulation,” J. of Applied Physics, vol.111, 2012, pp.103521.
    187. Lee, D. J., Lin, J. F.*, “High-Efficiency Concentrated Optical Module,” Energy, vol.44, Issue 1, 2012, pp.593-603.
    188. Hsieh, P. T., Li, T. C., Chung C. J., Peng, H. S., Lin, J. F., “Effects of Sputtering Power on Optical and Electrical Properties of Al-doped ZnO Thin Film on Flexible Substrates,” Advanced Materials Research, vol.579, 2012, pp118-123.
    189. Liou, J. L.*, Sun, Y. H., Lin, J. F., Chiu, Y. L., and Hwang, Y. C., “Fractal Theory Applied to Evaluate the Tribological Performances of Two Greases Demonstrated in Four-Ball Tests,” ASME, J. of Tribology, vol.134, 2012, pp.031801-1~13.
    190. Horng, J. H.*, Lin, J. F., Chern, S. Y., Wei, C. C., Chen, C. Y., “A Study of Friction and Adhesion Properties of ODS Film on MEMS Device,” Applied Mechanics and Materials, vol.220-223, 2012, pp.915-920.
    191. Wei, C. C.*, Horng, J. H., Lin, J. F., "Thermal Analysis of A Ball-Screw System," Advanced Materials Research, vol.591-593, 2012, pp.818-826. 
    192. Hseieh, P. T., Li, T. C., Wu, B. H., Chung, C. J., Lin, J. F.*, “Structure and Mechanical Properties of Pre-Strained Transparent Conducting Oxide Films on Flexible Substrate,” Surface and Coatings Technology, vol.231, 2013, pp.443-446.
    193. Chang, M. C., Lin, J. F.*, Liou, J. L., Wei, C. C., Horng, J. H., Chiu, Y. L., Hang, Y. C., “Fractal Analysis for Vibration Signals Created in a Ball-Screw Machine Operating in Short-and Long-Range Tribological Tests,” ASME, J. of Tribology, vol.135, 2013, pp.031101-11.
    194. Chu, H. Y.*, Lin, J. F., Li, Y. T., Hsieh, H. T., Chen, G. L., Tsai, P. H., “A Forward-Backward Data Processing Method for the Experimental Results of Reciprocating Motion,”Proceedings of the Internoise 2012/ASME NACA Meeting, IN12-00119.
    195. Li., T. C., Chung, C. J., Han, C. F., Lin, J. F.*, “Effects of the Prestrain Applied in the Poly (Ethylene Terephalate) Substrate on the TiO2 Depositions Efficiency, Porosity Geometries and Optical Properties of the TiO2/PET Specimens, ” Ceramics International, vol.39, 2013, pp.7063-7075.
    196. Li, T. C., Lin, J. F.*, ”Effects of Pre-strain Applied to Poly (Ethylene Terephalate) Substrate before TiO2 Film Deposition on the Contact Angle of the Substrate and the Morphology of the Specimen, ” Mechanics of Materials, vol.58, 2013, pp.23-34.
    197. Lee, C. J., Lin J. F.*, “Optical Parameters in High-Efficiency Optical Modules with a Parabolic Reflector before and after Coating with Ag Film, ” ASME, J. of Solar Energy Engineering, vol.136, 2013, pp.021003-15.
    198. Li, T. C., Han, C. F., Cheng, K. T., Lin, J. F.*, “Fatigue Life Study of ITO/PET Specimens in Terms of Electrical Resistance and Stress/Strain via Cyclic Bending Tests, ” IEEE/OSA J. of Display Technology, vol. pp, 2013, pp.1-9.
    199.  Chiang, Y. S., Chen, Y. L., Chuang, S. F.*, Wu, C. M., Wei, P. J., Han, C. F., Lin, J. F., Chang, H. T., “Riboflavin-Ultraviolet-A-Induced Collagen Cross-Linking Treatments in Improving Dentine Bonding, ” Dental Materials, vol. 29,  Jun. 2013,  pp. 682–692.
    200. Han, C. F., Wu, B. H., Chung, C. J., Chuang, S. F., Li, W. L., Lin, J. F.*, “The Effects of the Aspect Ratio of Dentin Specimen on Its Mechanical Properties, ” accepted by J. of the Mechanical Behavior of Biomedical Materials for minor revision, 2013.
    201. Chu, H., Y.*, Lin, J. F., Hsieh H. T., Chen, G. L. Li., Y. T., Tsai, P. H. “Thermal Analysis of Washer-on –Disk Wear Test by Micro-Genetic Algorithm, ” Wear, vol.301, 2013, pp.27-33.
    202. Li, T. C., Chung, C. J., Han, C. F., Chen, K. J., Lin, J. F.*, "Effects of the Inclination Angle of Polyethalate Substrate on Mechanical, Electrical, and Optical Properties of Al-doped ZnO Coating Film, " Ceramics International, vol.40, 2014, pp.6987-6998.
    203. Li, T. C., Chung, C. J., Han. C. F., Hsieh, P. T., Chen, K. J., Lin, J. F.*, "Effect of Prestrain Applied to Poly (Ethylene Terephthalate) Substrate before Coating of Indium-Tin-Oxide Film on Film Quality and Optical Electrical, and Mechanical Properties, " Ceramics International, vol.40, Jan. 2014, pp. 591–603.
    204. Nguyen, B. S., Lin, J. F., Perng, D. C., "1-nm thick Graphene Tri-layer as the Ultimate Copper Diffusion Barrier, " Applied Physics Letters, vol.104, 2014, pp.082105.
    205. Li, T. C., Chung, C. J., Huang, C. H., Han, C. F., Lin, J. F.*, "Effects of Deposition Conditions Of TiO2 Film and Substrate Prestrain on Film Void Geometrics and Optical Parameters in TiO2/PET Specimens, " accepted by International Journal of Applied Ceramic Technology, vol.39(6), 2014, pp. 7063-7075.
    206. Nguyen, B. S., Lin, J. F.*, "Microstructural, Electrical, and Mechanical Properties of Graphene Films on Flexible Substrate Determined by Cyclic Bending Test," ACS Applied Materials & Interfaces, vol.6(22),  2014, pp. 19566-73.
    207. Wu, C. D.*, Huang, Y. J., Feng, T. H., Lin, J. F., Riccobono, L., “Molecular Dynamics Simulations on Cold Welding of Gold Nanowires, ”  Journal of Nanoscience Letters, vol.4, 2014,  pp.13.
    208. Li, T. C., Kao, M. T., Lin, J. F.*, "Effects of Deposition Conditions of Al Film in Al/Glass Specimens and Annealing Conditions on the Defects Created in Composite Film and Electrical Properties of TFT Specimens," Journal of Material Science: Materials in Electronics, vol.25, 2014, pp.4425-4433.
    209. Li, T. C., Lin, J. F.*, "Fatigue Life Study of ITO/PET Specimens in Cyclic Bending Tests," Journal of Materials Sciences: Materials in Electronics, vol. 26(1), 2015, pp. 250-261.
    210. Li, T. C., Ho, C. F., Lin, J. F.*, "Effects of Prestrain Applied to Poly(Ethylene Terephthalate) Substrate on Microstructure and Morphologies of Porous TiO2 Film and Optical Scattering Behavior of Light," Applied Optics, vol. 54(4), 2015, pp. 816-827.
    211. Chang, C. C., Hou, K. H., Ger, M. D., Chung, C. K., Lin, J. F.*, "Fabrications of Electroless Ni-P Composite Coating beafire and after Annealing and Tribological Analyses," Key Engineering Materials, vol.642, 2015, pp.286-291.