Skip to Content

施明璋

personal pictures

兼任教授
姓名 施明璋 (Ming-Chang Shih)
組別 兼任教授
教授室 機械系館七樓91719
分機 62153
傳真機
電子信箱 mcshih@mail.ncku.edu.tw
個人網站 http://www.me.ncku.edu.tw/~fplab/index.htm
學歷
  1. 西德亞亨工業大學 機械學院 博士(西德 6803 - 7312 )
  2. 國立成功大學 機械研究所 碩士(中華民國 6409 - 6606 )
  3. 國立成功大學 機械系 學士(中華民國 5810 - 6206 )
經歷
  1. 國立成功大學 教授 (800801 - )
  2. 國立成功大學 副教授 (740201 - 800731)
專長
  1. 數位控制、自動控制
  2. 油壓氣壓控制及設計
  3. 車輛懸吊及剎車系統控制
  4. 液壓車系統整合控制
  5. 液靜壓軸承設計及控制
教師研究介紹
服務

A. 期刊擔任職務
2005~now, JFPS international Symposium on Fluid Power, 審查委員
2005~now, International Symposium on Advanced Vehicle Control, 審查委員
2005~now, International Conference on Fluid Power Transmission and Control, 審查委員

B. 擔任機關職務
2011~now, 協助傳統產業技術開發計劃(CITD), 南區金屬機電類組召集人
2006~now, 經濟部技術處, 科專計畫評審委員
2008~now, 經濟部, 中小企業研發計畫(SIBR)評審委員
2008~now, 成功大學機械系, 教評會委員
2008~now, 成功大學, 院務會議代表
2010~now, 成功大學, 校務會議代表
2009~now, 高等教育評鑑中心, 工程相關學門規劃委員
2005~now, 經濟部國家標準技術委員會, 審查委員
2005~now, 教育部學審會, 審查委員
2001~now, 空油壓公會, 榮譽顧問

榮譽

1. 2013年,指導學生謝振盛,獲選第二屆自動控制與機電工程國際研討會最佳論文獎
2. 2013年,指導學生王榆銜,獲選第三屆上銀科技優秀機械博士論文竸賽優秀論文獎
3. 2011年,指導學生王榆銜與李俊蔚,獲選第十六屆車輛工程研討會最佳論文獎
4. 2007年,獲選詹天佑論文獎
5. 2006年,指導學生許質永,獲選中國機械工程學刊金質獎章
3. 2006年,指導學生王榆銜,獲選第二屆車輛工程研究論文獎碩士組第二名銀質獎
4. 2005年,指導學生陸振原,獲選車第一屆車輛工程研究論文獎選拔博士組獲獎
5. 2005年,指導學生蘇雅玲,獲選第二屆上銀機械科技碩士論文獎選拔第一名金質獎

專利

 

  1. 羅錦興; 謝孟達; 張建成; 蔡明宏; 方信恩; 張毅; 楊文宏; 施明璋; 戴政棋;,20140301,導管之運動控制裝置及磁控內視鏡導管運動系統,第473184號
  2. 羅錦興; 謝孟達; 張建成; 蔡明宏; 方信恩; 張毅; 楊文宏; 施明璋; 戴政祺;,20130621,磁控內視鏡系統及其磁控裝置,第455466號
  3. 施明璋; 白凱仁;,20130621,液氣壓專用多功能智慧型伺服晶片控制器,第456024號
  4. 施明璋; 黃俊奎;,20130316,機車直行及側傾轉彎防鎖死煞車系統控制器,第201311502號
  5. 施明璋; 王榆銜;,20120201,連續可調式之雙筒避震器,第421917號
  6. 施明璋; 王榆銜;,20120221,整合式主動式液壓避震器,第423177號
  7. 施明璋; 白凱仁;,20110801,節能液壓馬達驅動裝置,第408622號
  8. 施明璋; 謝振盛;,20100901,雙筒式氮氣避震器之封氣軸承裝置,第387795號
  9. 施明璋; 陸振原;,20070616,智慧型防鎖死煞車控制法則,第200722332號
  10. 施明璋; 白凱仁;,20061001,氣壓數位微小比例流量控制閥,第298676號
  11. 施明璋; 王登彥;,20061201,微小型材料拉伸與壓縮試驗機裝置,第302017號
  12. 施明璋; 蘇雅玲; 白凱仁;,20060211,具高承載力及剛性之氣靜壓平面軸承,第287393號
  13. 施明璋; 陸振原;,20050911,嵌入式機車液壓防鎖死煞車系統,第275136號
  14. 施明璋; 王登彥;,20050601,氣壓隔震支座結構之改良,第266231號
  15. 施明璋; 白凱仁; 蘇雅玲;,20050416,高剛性氣壓壓電混合致動器之裝置與控制方式,第200514286號
  16. 施明璋; 白凱仁;,20050216,伺服氣壓微奈米精密X-Y定位平台及控制方法,第200505624號
  17. 施明璋; 白凱仁;,20041001,嵌入壓電致動器之低摩擦氣壓缸,第245317號
  18. 施明璋; 蔡明宏;,20041001,具壓力補償之氣壓平衡配重裝置,第244997號
  19. 施明璋; 白凱仁;,20040916,脈寬調變控制電磁閥之改良方法與裝置,第200417702號
  20. 施明璋; 白凱仁; 邱智勇;,20040901,嵌入氣壓軸承之低摩擦氣壓缸,第242614號
  21. 施明璋; 王登彥;,20040501,微小液壓泵以電控式驅動液壓缸作低速調速高出力及定位裝置之改良,第223873號
  22. 施明璋; 陸振原;,20031211,機車液壓防鎖死煞車系統,第566387號
  23. 施明璋; 白凱仁;,20030921,通訊連接器使用伺服液壓壓床之自動化加工系統,第215651號
  24. 施明璋; 王登彥; 王文鴻;,20021111,連續無段式可調避震器,第197236號
  25. 施明璋; 王登彥;,20020711,六段可調式避震器,第192675號
  26. 施明璋; 陸振原;,20020621,機車用液壓防鎖死煞車系統之改良,第191523號
  27. 施明璋; 王登彥;,20020321,電子流變液體之伺服閥結構,第189205號
  28. 施明璋; 陸振原; 張森憲;,20011121,機車ABS煞車裝置之改良,第183694號
  29. 施明璋; 白凱仁;,20011121,數位比例氣壓壓力控制閥,第184754號
  30. 施明璋; 白凱仁;,20011021,氣壓數位伺服控制閥,第182076號
  31. 施明璋; 王登彥;,20010501,電子流變液體之比例壓力控制閥結構,第173911號

 

著作

 

A. 期刊論文

  1. Jen-Sheng Shie and Ming-Chang Shih*,"Comparison precision of oil Film thickness of a hydrostatic bearing by using different controllers under external load",Applied Mechanics and Materials: Automatic Control and Mechatronic Engineering II;(EI 2013)
  2. Jen-Sheng Shie and Ming-Chang Shih*,"Recess design and dynamic control of an active compensating hydrostatic bearing",Journal of Advanced Mechanical Design Systems and Manufacturing;(SCI & EI 2013)
  3. Hung-I Chen and Ming-Chang Shih*,"Force and Position Control of the Pneumatic Cylinders through a Microscope with a CCD Camera",Transactions of the Canadian Society for Mechanical Engineering;(SCI & EI 2013)
  4. Jen-Sheng Shie and Ming-Chang Shih,"A study on optimization design and performance test of an aerostatic bearing",Advanced Materials Research;(EI 2012)
  5. Hung-I Chen and Ming-Chang Shih*,"Visual Control of an Automatic Manipulation System by Microscope and Pneumatic Actuator",IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING;(SCI & EI 2012)
  6. Yu-Hsien Wang;Ming Chang Shih*,"Effect of a hybrid controller on the ride comfort under random road excitation for a semi-active suspension system",Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering; Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering(SCI & EI 2012)
  7. Ming-Chang Shih*;Kei-Ren Pai,"Angle Control of a Variable Displacement Hydraulic Motor Using a Self-tuning Fuzzy-Sliding Mode Controller",Advanced Science Letters;(SCI & EI 2011)
  8. M. C. Shih*;C. K. Huang,"Dynamic Analysis and control of an Anti-lock Brake System for a Motorcycle with a Camber Angle",Vehicle system dynamic;(SCI & EI 2011)
  9. Ming Chang Shih*;Yu-Hsien Wang,"Design of a genetic-algorithm-based self-tuning sliding fuzzy controller for an active suspension system",Proceedings of the Institution of Mechanical Engineers, Part I, Journal of Systems and Control Engineering;(SCI & EI 2011)
  10. Ming-Chang Shih*;Ping-Chang Chen,"Robust Control of a Novel Active Pneumatic Vibration Isolator through Floor Vibration Observer",Journal of Vibration and Control;(SCI & EI 2011)
  11. M. C. Shih*;C. K. Huang,"Design of a hydraulic anti-lock braking System (ABS) for a motorcycle",journal of mechanical science and technology;(SCI & EI 2010)
  12. Ming-Hung Tsai;Ming-Chang Shih*,"G-load tracking control of a centrifuge driven by servo hydraulic systems",PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING; 機械工程期刊航空工程部分(SCI 2009)
  13. Ming-Chang Shih*;Teng-Yen Wang,"Active control of electro-rheological fluid embedded pneumatic vibration isolator",Integrated Computer-Aided Engineering; 整合電腦工程(SCI 2008)
  14. Ming-Chang SHIH*;Ping-Chang CHEN,"Modeling and Robust Active Control of a Pneumatic Vibration Isolator",Journal of Vibration and Control; 震動與控制期刊(SCI 2007)
  15. M.C. Shih*;M.H. Tsai,"A Study of the Pneumatic Counterweight of Machine Tools Conventional and Active Pressure Control Method",International Journal of JSME; 日本科技機械工程之國際期刊(SCI & EI 2006)
  16. M.C. Shih*;C.Y. Lu,"An Experimental Study on the Longitudinal and Lateral Adhesive Coefficients Between the Tyre and the Road for a Light Motorcycle",Vehicle System Dynamics; 車輛系統動態(SCI & EI 2005)
  17. M.C. Shih*;C.Y. Lu,"Design of a Hydraulic Anti-Lock Braking Modulator and an Intelligent Brake Pressure Controller for a Light Motorcycle",Vehicle System Dynamics; 車輛動態(SCI & EI 2005)

B. 研討會論文

  1. Ming-Chang Shih and Tsung-Yuan Chen,"Design and Control of Pneumatic Minimal Invasive Surgery Manipulator",The 12th International Conference on Fluid Control, Measurements, and Visualization (FLUCOME 2013);( 2013)
  2. Jen-Sheng Shie and Ming-Chang Shih,"A Study on Optimum Design of a Hydrostatic Guideway by using HTGA/Gray Approach on Rotary Machine Tool",The 12th International Conference on Fluid Control, Measurements, and Visualization (FLUCOME 2013);( 2013)
  3. Jen-Sheng Shie and Ming-Chang Shih,"A Study on Optimum Design and Dynamic Behavior of a Hydrostatic Guideway on Rotary Machine Tool",The 2013 CACS International Automatic Control Conference (CACS2013);( 2013)
  4. Ming-Chang Shih and Jen-Sheng Shie,"A study on oil film thickness control of an active hydrostatic bearing",The 5th International Forum on Systems and Mechatronics (IFSM 2013);( 2013)
  5. Ming-Chang Shih* and Jen-Sheng Shie,"Comparison precision of oil Film thickness of a hydrostatic bearing by using different controllers under external load",The 2nd International Conferenceon Automatic Control and Mechatronic Engineering (ICACME2013);( 2013)
  6. Hung I Chen and Ming Chang Shih,"Force and Position Precision Control of the Pneumatic Cylinders through a CCD Camera and a Microscope",The 5th International Conferenceon Positioning Technology;( 2012)
  7. Jen-Sheng Shie and Ming-Chang Shih,"A study on optimization design and performance test of an aerostatic bearing",The 2nd International Conference on Advanced Engineering Materials and Technology (ICAEMT2012);( 2012)
  8. Ming-Chang Shih and Kei-Ren Pai,"Design and Control of Hydraulic Transmission System for Energy Saving and Recuperation",The 22th International Conference Flexible Automation and Intelligent Manufacturing (FAIM2012);( 2012)
  9. M.C. Shih*;H.Y. Chen,"Visual Position Control of a Microscope and Pneumatic Driven Manipulation System",1st Int. Conf. on Computer Control and Automation;( 2011)
  10. Ming-Chang Shih*;Kei-Ren Pai,"Angle Control of a Variable Displacement Hydraulic Motor Using a Self-tuning Fuzzy-Sliding Mode Controller",The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011);( 2011)
  11. M.C. Shih*;Yu-Hsien Wang,"Ride Comfort with Self-organizing Fuzzy Sliding Mode Controller for Semi-active Suspension of a Personal Car",8th JFPS International Symposium on Fluid Power;( 2011)
  12. M.C. Shih*;H.Y. Chen,"VISUAL CONTROL OF A PNEUMATIC DRIVEN MANIPULATOR FOR THE BIOMEDICAL TECHNOLOGY",8th Japan Fluid Power System Society Int. Conf. on Fluid Power;( 2011)
  13. Ming-Chang Shih*;Kei-Ren Pai;Yue-Lin Guo,"SELF-TUNING FUZZY-SLIDING CONTROLLER DESIGN OF VARIABLE DISPLACEMENT HYDRAULIC MOTOR SYSTEM WITHOUT POSITION FEEDBACK OF REGULATING CYLINDER",The 8th JFPS international Symposium on Fluid Power;( 2011)
  14. Ming-Chang Shih*;Jen-Sheng Shie,"A study on optimization design of a hydrostatic bearing",3rd International Forum on Systems and Mechatronics;( 2010)
  15. Ming-Chang Shih*;Chun-Kuei Huang,"A study on anti-lock brake system of a motorcycle",3rd International Forum on Systems and Mechatronics;( 2010)
  16. Ming-Chang Shih*;Hung-Yi Chen,"Hybrid vision control apply on automatic pneumatic micromanipulation system",The 9th Annual IEEE Conference on Sensors;( 2010)
  17. Ming-Chang Shih*;Hung-Yi Chen,"Design and control of the 3 axes pneumatic servo micromanipulator for the biological technology",3rd International Conference on Micro- and Nanosystems;( 2009)
  18. Ming-Chang Shih*;Yu-Hsien Wang,"Electro-hydraulic Suspension Control of a Passenger Car",7th International Conference on Fluid Power Transmission and Control;( 2009)
  19. Ming-Chang Shih*;Chun-Kuei Huang,"Novel anti-lock braking (ABS) modulator and controller for a motorcycle",7th International Conference on Fluid Power Transmission and Control;( 2009)
  20. Ming-Chang Shih*;Tzu-Ting Lu;Kei-Ren Pai,"11th International Conference on New Actuators",Precision Position and Force Control of an Ultrasonic Motor Driven Table;( 06 2008)
  21. Ming-Chang Shih*;Kei-Ren Pai,"Design and nanometer positioning of a low friction pneumatic cylinder embedded with aerostatic bearing",Proceedings of the 7th JHPS International Symposium on Fluid Power;( 09 2008)
  22. Ming-Chang Shih*;Yu-Hsien Wang,"Active Suspension Control of a Passenger Car with an Integrated Damper",9th International Symposium on Advanced Vehicle Control;( 2008)
  23. Ming-Chang Shih*;Ping-Chang Chen,"Robust Control of Active Pneumatic Vibration Isolator with Disturbance Observer",13th International Meeting on Low Frequency Noise and Vibration and its Control;( 2008)
  24. Ming-Chang Shih*;Jun-Yu Chuang;Kei-Ren Pai,"Control of a Low-friction Pneumatic Actuator",11th International Conference on New Actuators;( 06 2008)
  25. M.C. Shih*;Y.H. Wang,"Semi-active Suspension Control of a Passenger Car Using a GA-fuzzy Approach",Fifth IFAC Symposium on Advances in Automotive Control;( 08 2007)