Skip to Content

張錦裕

personal pictures

成大特聘教授
姓名 張錦裕 (Jiin-Yuh Jang)
組別 熱流科學與能源組
教授室 機械系館6樓91617室
分機 62148
傳真機 (06)2088573
電子信箱 jangjim@mail.ncku.edu.tw
個人網站
學歷
  1. 美國紐約州立大學水牛城分校 機械工程 博士 (1981/05-1983/07)
  2. 美國紐州約立大學水牛城分校 機械工程 碩士 (1979/09-1981/05)
  3. 國立成功大學 機械工程 學士(1973/09-1977/06)
經歷
  1. 國立成功大學 機械工程系 特聘教授 (2002/08-present)
  2. 國立成功大學 機械工程系 教授 (1988/09-present)
  3. 國立成功大學 工學院 副院長 (2010/08-2013/01)
  4. 國立成功大學 機械工程學系 系主任 (2005/08-2008/07)
  5. 國立成功大學 附設高工 代理校務主任 (2006/08-2008/07)
  6. 國立成功大學 研發處 副研發長 (2003/10-2005/07)
  7. 國立成功大學 機械工程系 副教授 (1984/08-1988/07)
  8. 國立清華大學 動力機械系 副教授 (1983/08-1984/07)
  9. 三陽工業股份有限公司 設計課 工程師 (1977/07-1979/07)
專長
  1. 能源工程
  2. 熱交換器設計
  3. 冷凍空調
  4. 計算流體力學
  5. 液動穩定論
教師研究介紹
服務

 

  1. 國科會工程處諮議委員
     
  2. 考選部高考技師及機電技師審議委員會委員
     
  3. Editor for two International Journals “Advances in Mechanical Engineering”and “Open Thermodynamics”
     
  4. 中華民國冷凍空調學會 期刊編輯委員, 
     
  5. 機械技師學刊 編輯委員
榮譽

 

  1. 美國機械工程學會(ASME)Fellow
     
  2. 美國冷凍空調學會(ASHRAE) Fellow
     
  3. 國科會研究獎助"傑出研究獎"二次,  國科會研究獎助"優等獎”二次
     
  4. 教育部教學研究用微電腦套用程式創作甲等

 


 

專利

 


  1. 張錦裕,朱力民,楊榮華,”氫油混合動力機車之傾倒安全偵測系統”,中華民國新型專利(M399053),2011/03/01-2020/10/13

     
  2. 張錦裕,朱力民,楊榮華,”車輛安全警示系統 “中華民國發明專利,中華民國發明專利(1401174),2013/07/11-2030/10/06
     
  3. 吳展維,吳調原,張錦裕,蔡瑛吉,黃有晟,”具有熱擷取結構的熱電裝置”,中華民國新型專利(M457300),2013/07/11-2023/03/07
     
  4. 張錦裕,,黃育賢,廖婉婷,” 燃料電池模組之鎖合裝置與燃料電池裝置” 中華民國發明專利,審查中,申請案號: 99134104

 


 

著作

(A) 論文著作

  1. Gill, W. N., Jang, J. Y. and Mollendorf, J. C., 1981," Rapid Solidification of Subcooled Small Metallic Drops," Chemical Engineering Communications, Vol. 12, PP.3-31. (SCI & EI)
  2. Gill, W. N., Jang, J. Y., Mollendorf, J. C. and Adam, C. M., 1984,"Rapid Solidification of Subcooled Small Metallic Drops:Internal Nucleation," Journal of Crystal Growth, Vol. 66, PP.351-368. (SCI & EI)
  3. Jang, J. Y. and Wu, A. S., 1986, "Inward Solidification of a Subcooled Metallic Sphere, "Journal of the Chinese Society of Mechanical Engineers, Vol. 7, No.2, PP.233-242. (EI)
  4. Jang, J. Y., Lin, I. C. and Chen, C. K., 1986,"Vortex Instability in Natural Convection Flow on an Inclined Uniform-Heat-Flux Surface, "Journal of the Chinese Society of Mechanical Engineers, Vol. 7, No. 4, PP. 233-242. (EI)
  5. Jang, J. Y. and Jeng, W. C.  1986,"Effects of Interfacial Curvature and Interface Attachment Kinetics on the Freezing of Spherical Crystal Nuclei," Journal of the Chinese Society of Mechanical Engineers, Vol7, No. 5, PP. 373-378. (EI)
  6. Jang, J. Y. and Chang, W. J., 1987, "Vortex Instability of Inclined Buoyant Layer in Porous Media Saturated with Cold Water," International Communications in Heat and Mass Transfer, Vol. 14, No.4, PP. 405-416.(SCI & EI)
  7. Jang, J. Y. and Lin, C. N., 1987, "The Laminar Free Convection of a Liquid with Variable Viscosity," Journal of the Chinese Society of Mechanical Engineers, Vol.8, No.3, PP. 165-171. (EI)
  8.  Jang, J. Y. and Chang, C. C., 1987, "Adiabatic Solutions for a Misaligned Journal Bearing with Non-Newtonian Lubricants," Tribology International, Vol. 20, No.5, PP.267-275.(SCI & EI)
  9.  Jang, J. Y.  and Wang, M. T., 1987, "Transient Response of Cross Flow Heat Exchangers with One Fluid Mixed," International Journal of Heat and Fluid Flow, Vol.8, No.3, PP.182-186. (SCI & EI)
  10. Shaw, H. J., Chen, C. K. and Jang, J. Y., 1988, "Natural Convection in an Enclosure Heated from Below with a Conductive Horizontal Partition,” AIAA, Journal of Thermophysics and Heat Transfer, Vol.2, No.4, PP. 335-342. (SCI & EI)
  11. Jang, J. Y. and Lin, C. N., 1988, "Free Convection Flow over an Uniform-Heat-Flux Surface with Temperature-Dependent Viscosity," Warme-und Stoffubertragung(Thermo- and Fluid Dynamics), Vol. 23, PP.213-217. (SCI & EI)
  12. Jang, J. Y.  and Chang, W. J. , 1988, "Buoyancy-Induced Inclined Boundary Layer Flow in a Porous Medium Resulting from Combined Heat and Mass Buoyancy Effects, "International Communications in Heat and Mass Transfer, Vol. 15, No. 1, PP. 17-30.(SCI & EI)
  13. Jang, J. Y.  and Chang, C. C. , 1988, "Adiabatic Analysis of Finite Width Journal Bearings with Non-Newtonian Lubricants," Wear, Vol.122, No. 1, PP. 63-75. (SCI & EI)
  14.  Jang, J. Y. and Chang, W. J., 1988, "Buoyancy-Induced Inclined Boundary Layer Flow in a Saturated Porous Medium," Computer Methods in Applied Mechanics and Engineering, Vol. 68, PP. 333-344.(SCI & EI)
  15.  Jang, J. Y. and Chang, C. C., 1988, "Thermohydrodynamic Analysis of Gas-Lubricated Self-Acting Journal Bearings of Finite Length," Journal of the Chinese Society of Mechanical Engineers, Vol. 9, No. 3, PP. 161-168. (EI)
  16.  Jang, J. Y. and Mollendorf, J. C., 1988, "The Stability of a Vertical Natural Convection Boundary Layer with Temperature Dependent Viscosity," International Journal of Engineering Science, Vol. 26, No. 1, PP. 1-12. (SCI & EI)
  17. Jang, J. Y. and Chang, W. J., 1988, "Vortex Instability of Buoyancy-Induced Inclined Boundary Layer Flow in a Saturated Porous Medium," International Journal of Heat and Mass Transfer, Vol. 31, No. 4, PP. 759-767. (SCI & EI)
  18. Jang, J. Y. and Chang, W. J., 1988,"The Flow and Vortex Instability of Horizontal Natural Convection in a Porous Medium Resulting from Combined Heat and Mass Buoyancy Effect," International Journal of Heat and Mass Transfer, Vol. 31, No. 4, PP. 769-777.(SCI & EI)
  19. Jang, J. Y. and Tsai, W. L., 1988, "Thermal Instability of Two Horizontal Porous Layers with a Conductive Partition," International Journal of Heat and Mass Transfer, Vol. 31, No. 5, PP. 993-1003. (SCI & EI)
  20. Lin, T. R., Li, J. F. and Jang, J. Y., 1989, "Thermal Effects in Elasohydrodynamic Lubrication of Line Contacts," Journal of the Chinese Society of Mechanical Engineers, Vol, 10, No. 4, PP. 303-310. (EI)
  21. Lin, J. F., Lin, T. R. and Jang, J. Y., 1989, "The Elasohydrodynamic Lubrication of Line Contacts with Non-Newtonian Lubricant," Tribology International, Vol. 22, No. 5, PP. 335-342.(SCI & EI)
  22. Jang, J. Y. and Chen, C. N., 1989, "Natural Convection in an Inclined Porous Enclosure with Off-Center Diathermal Partition,"Warme-und Stoffubertragung(Thermo- and Fluid Dynamics), Vol. 24, PP. 117-123.(SCI & EI)
  23. Jang, J. Y. and Ni, J. R., 1989, "Transient Free Convection with Mass Transfer from an Isothermal Vertical Flat Plate Embedded in a Porous Medium," International Journal of Heat and Fluid Flow, Vol. 10, No. 1, PP. 59-65. (SCI & EI)
  24. Chang, W. J. and Jang, J. Y., 1989, "Non-Darcian Effects on Vortex Instability of a Horizontal Natural Convection Flow in a Porous Medium," International Journal of Heat and Mass Transfer, Vol. 32, No. 3, PP. 529-539. (SCI & EI)
  25. Chang, W. J. and Jang, J. Y., 1989, "Inertia Effects on Vortex Instability of a Horizontal Natural Convection Flow in a Saturated Porous Medium," International Journal of Heat and Mass Transfer, Vol. 32, No. 3, PP. 541-550. (SCI & EI)
  26. Jang, J. Y. and Chang, W. J., 1989, "Maximum Density Effects on Vortex Instability of Horizontal and Inclined Buoyancy-Induced Flows in Porous Media," Transactions of ASME, Journal of Heat Transfer, Vol. 111, No. 2, PP. 572-574.(SCI & EI)
  27. Jang, J.Y., Lie, K.N. and Chen, M. J., 1991,"The Computer Aided Design of Finned Tube Heat Exchangers," Energy, Resource and Environment, Vol.4, No. 2, PP. 42-46.
  28. Lie K. N. and Jang, J. Y., 1991, "The Natural Convection in a Horizontal Annulus Partially Filled with a Porous Medium," The Chinese Journal of Mechanics, Vol. 7, No. 4, pp. 281-288. (EI)
  29. Lin, J. F., Cheng, M. J. and Jang, J. Y., 1991, "The Tribological Behavior of the Steel Rollers under Rolling-Sliding Contacts," Wear, Vol. 146, PP. 149-164 (SCI & EI)
  30. Jang, J. Y., and Ni, J. R., 1991, "Mixed Convection Adjacent to Inclined Flat Surfaces Embedded in a Porous Medium,” Warme-und Stoffubertragung (Thermo- and Fluid Dynamics), Vol. 27, PP. 103-108.(SCI & EI)
  31. Jang, J. Y., Tzeng, D. J. and Shaw, H. J., 1991, "Transient Free Convection with Mass Transfer on a vertical Plate Embedded in a High Porosity Medium," Numerical Heat Transfer, Part A, Vol. 20,PP.1-18.  (SCI & EI)
  32. Jang, J. Y., Chen, M. J. and Lin, J. F., 1991 "Adiabatic Solutions of Finite Width Journal Bearings with Rough Surfaces", Tribology International, Vol. 24, No.6, pp.373-380.(SCI & EI)
  33. Jang, J. Y. and Chen, J. L., 1992, "Forced Convection in a Parallel Plate Channel Partially Filled with a High Porosity Medium", International Communications in Heat and Mass Transfer, Vol. 19, No. 2, PP. 263-273. (SCI & EI)
  34. Jang, J. Y. and Leu, J. S., 1992, "Buoyancy-Induced Boundary Layer Flow of Liquids in a Porous Medium with Temperature-Dependent Viscosity," International Communications in Heat and Mass Transfer, Vol. 19, No.3. PP. 435-444. (SCI & EI)
  35. Jang, J. Y. , Guan, T. C., Li, J. F. and Shieh, S. K., 1992 "The Elasohydrodynamic Lubrication of Elliptical Contact with Non-Newtonian Lubricant,"  The Chinese Journal of Mechanics, Vol. 8,No. 3, PP. 263-273. (EI)
  36. Jang, J.Y. and Lie, K. N., 1992, "Vortex Instability of Mixed Convection Flow over Horizontal and Inclined Surfaces in a Porous Medium,” International Journal of Heat and Mass Transfer, Vol. 35, No. 9, PP. 2077-2985. (SCI & EI)
  37. Jang, J. Y. and Hwang, J. H., 1992, "Transient Response of Crossflow Heat Exchangers with Both Fluids Unmixed," The Chinese Journal of Mechanics, Vol. 8, No.4, PP. 339-351.  (EI)
  38. Jang, J. Y. and Chen, J. L., 1993,"Thermal Dispersion and Inertia Effects on Vortex Instability of a Horizontal Mixed Convection Flow in a Saturated Porous Medium", International Journal of Heat and Mass Transfer, Vol.36, No. 2, PP. 381-389.(SCI & EI)
  39. Lie, K. N. and Jang, J.Y., 1993, "Vortex Instability of Mixed Convection Flow over Horizontal and Inclined Surfaces in a Porous Medium,” Numerical Heat Transfer, Part A, Vol. 23, PP. 361-378. (SCI & EI)
  40. Chang, W. J. and Jang, J. Y., 1993, "Boundary Effect on the Instability of a Natural Convection in a Porous Medium," The Chinese Journal of Mechanics, Vol. 9,pp. 115-123. (EI)
  41. Jang, J. Y. and Leu, J. S., 1993, "Variable Viscosity Effects on the Vortex Instability of Free Convection Boundary Layer Flow over a Horizontal Surface in a Porous Medium," International Journal of Heat and Mass Transfer, Vol. 36, No.5. PP. 1287-1294.(SCI & EI)
  42. Jang, J. Y. and Chen, J. L., 1993, "Variable Porosity Effect on Vortex Instability of a Horizontal Mixed Convection Flow in a Saturated Porous Medium", International Journal of Heat and Mass Transfer, Vol.36, No. 6, PP.1573-1582. (SCI & EI)
  43. Jang, J. Y. and Lai, K. N., 1993,"Effects of Blowing/Suction on Vortex Instability of Horizontal Free Convection Flows", AIAA, Journal of Thermophysics and Heat Transfer, Vol. 7, No. 4, PP. 749-751. (SCI & EI)
  44. Lin, C. N., Jang, J. Y. and Leu J. S., 1993, "Computer Aided Design of Plate Finned-Tube Heat Exchangers," Journal of Solar Energy, Vol. 1, PP68-77.
  45. Jang, J. Y. and Leu, J. S., 1994, "Variable Viscosity Effects on the Vortex Instability of Free Convection Boundary Layer Flow over a Horizontal Surface," Numerical Heat Transfer, part AVol. 5, PP. 100-106. (SCI & EI)
  46. Wang, C. L. and Jang, J. Y., 1994, "The Developing Mixed Convection in a Vertical Non-Darcian Porous Channel", The Chinese Journal of Mechanics, Vol. 10, No.2, PP. 131-144. (EI)
  47. Jang, J. Y., and Chen, J. L., 1994, "Variable Porosity and Thermal Dispersion Effects on Vortex Instability of a Horizontal Natural Convection Flow in a Saturated Porous Medium,” Warme-und Stoffubertragung (Thermo- and Fluid Dynamics), Vol. 29, pp. 153-160.(SCI & EI)
  48. Leu, J. S. and Jang, J. Y., 1994, "The Wall and Free Plumes above a Horizontal Line Sources in Non-Darican Porous Media," International Journal of Heat and Mass Transfer, Vol.37, No. 13, PP.1925-1933. (SCI & EI)
  49. Hsueh, C. H. and Jang, J. Y., 1994"The Effect of Longitudinal Heat Conduction on the Cross Flow Heat Exchangers with One Fluid Mixed", The Chinese Journal of Mechanics, Vol. 10, No. 3 PP. 227-236. (EI)
  50. Leu, J. S. and Jang, J. Y., 1995, "The Natural Convection from a Point Heat Source Embedded in a Non-Darican Porous Medium," International Journal of Heat and Mass Transfer, Vol. 38, No.6, PP. 1097-1104. (SCI & EI)
  51. Jang, J. Y., Lie, K. N. and Chen, J. L., 1995, "The Influence of Surface Mass Flux on Vortex Instability of a Horizontal Mixed Convection Flow in a Saturated Porous Medium", International Journal of Heat and Mass Transfer, Vol. 38, No. 17, PP.3305-3311.(SCI & EI)
  52. Liu, Y. S., Chang, C. C. and Jang, J. Y., 1995, The Tribological Analysis of Ceramic Coatings of Cutting Tools, Journal of Technology, Vol. 10, No.3, PP. 341-347.
  53. Jang, J. Y., Wu, M. C. and Chang, W. J., 1996, "Numerical and Experimental Studies of Tree-Dimensional Plate-Fin and Tube Heat Exchangers", International Journal of Heat and Mass Transfer, Vol. 39, No. 14, PP. 3057-3066.(SCI & EI)
  54. Wang, C. C., Chen, P. Y. and Jang, J. Y., 1996, “Heat Transfer and Friction Characteristics of Convex-Louver Fin-and-Tube Heat Exchangers”, Experimental Heat Transfer, Vol. 9, PP. 61-78.(SCI & EI)
  55. Jang, J. Y. and Shiang, C. T., 1997 “The Mixed Convection Plume along a Vertical Adiabatic Surface Embedded in a Non-Darcian Porous Medium”, International Journal of Heat and Mass Transfer, Vol. 40, PP. 1693-1999. (SCI & EI)
  56. Li, B. C., Jang , J. Y. and You, Y. I., 1997, “Measurement of Thermal Contact Resistance in Plate Finned-Tube Heat Exchangers”, The Chinese Journal of Mechanics, Vol. 13, No. 1, PP. 55-63. (EI)
  57. Jang, J. Y. and Chen, L. K., 1997, “Numerical Analysis of Heat Transfer and Fluid-Flow in a Three-Dimensional Wavy-Fin and Tube Heat Exchanger”, International Journal of Heat and Mass Transfer, Vol. 40, No. 16, PP. 3981-3990. (SCI & EI)
  58. Jang, J. Y., Lai, J. T. and Liu, L. C., 1998, “The Thermal-Hydraulic Characteristics of Staggered Circular Finned-Tube Heat Exchangers under Dehumidifying Conditions”, International Journal of Heat and Mass Transfer, Vol. 41, No. 21, PP. 3321-3337. (SCI & EI)
  59. Lin, C. T. and Jang, J. Y., 1998 “The Development of the Computer-Aided Design Software for the Closed Type Cooling Tower”, Chinese Journal of Heating, Refrigerating and Air Conditioning, Vol. 7, No. 1 PP. 60-69.
  60. Jang, J. Y. and Yang, J. Y., 1998 “Experimental and Numerical Analysis of the Thermal-Hydraulic Characteristics of Elliptic Finned-Tube Heat Exchangers”, Heat Transfer Engineering, Vol.19, No. 4, PP. 55-67. (SCI & EI)
  61. Lin, C. T. and Jang, J. Y., 1998 “The Design Theory of Brazed-Type Plate Heat Exchangers”, Chinese Journal of Heating, Refrigerating and Air Conditioning, Vol. 7, No. 3 PP. 15-27.
  62. Wang, C. C., Jang, J. Y. and Chiou, N. F., 1999, “A Heat Transfer and Friction Correlation for Wavy Fin and Tube Heat Exchangers”, International Journal of Heat and Mass Transfer, Vol. 42, No. 10, PP. 1919-1924. (SCI & EI)
  63. Wang, C. C., Jang, J. Y., Lai, C. C. and Chang, Y. J., 1999, “Effect of Circuit Arrangement on the Performance of Air-Cooled Condensers”, International Journal of Refrigeration, Vol. 22, No. 4, PP. 275-282.(SCI & EI)
  64. Wang, C. C, Jang, J. Y. and Chiou, N. F, 1999 “Effects of Waffle Height on the Air-Side Performance of wavy Fin-and –Tube Heat Exchangers”, Heat Transfer Engineering,Vol.20, No. 3, PP. 45-56.(SCI & EI)
  65. Shih, F. S. and Jang, J. Y., 2000 “Themal-Hydraulic Characteristics of Multi-Bent Air-Conditioning Evaporator”, Journal of Refrigerating and Air- Conditioning Technology, No. 5 PP. 93-102.
  66. Jang, J.Y. and Lin, C. N., 2000, “A Numerical Analysis Three-Dimensional Heat Transfer and Fluid Flow in Chevron Plate Channels”, ASHRAE (American Society of Heating, Refrigeration and Air-conditioning Engineers) Transactions, Vol. 106, part 2, PP. 856-863. (EI)
  67. Tseng, H. C   and Jang, J. Y. and, 2000, “Thermal and Hydraulic Performances of Plate Finned-Tube Evaporator under Frosting Conditions”, Journal of Refrigerating and Air- Conditioning Technology, No. 6, PP. 136-142.
  68. Hung, C. H., Hsu, G. C. and Jang, J. Y., 2001, “A Non-linear Inverse Problem for the Prediction of Local Thermal Contact Conductance in Plate Finned-Tube Heat Exchangers, Heat and Mass Transfer, Vol. 37, PP. 351-359. (SCI & EI)
  69. Jang, J.Y., Shien, K. P. and Ay, H., 2001, “3-D thermal-hydraulic analysis in convex louver finned -tube heat exchangers”, ASHRAE (American Society of Heating, Refrigeration and Air-conditioning Engineers) Transactions, Vol. 107, part 2, PP. 503-509. (EI)
  70. Lin, C. N. and Jang, J. Y., 2002, “A Two-Dimensional Fin efficiency Analysis of Combined Heat and Mass Transfer in Elliptic Fins”, International Journal of Heat and Mass Transfer, Vol.45, No. 18, PP.3839-3847. (SCI & EI)
  71. Ay, H. Jang, J. Y. and J. N. Yeh, 2002, “Local Heat Transfer Measurements of Plate Finned-Tube Heat Exchangers by Infrared Thermography”, International Journal of Heat and Mass Transfer, Vol.45, No. 20, PP.4069-4078.(SCI & EI)
  72. Jang, J. Y. and Lin, C. N., 2002, “Two-Dimensional Fin efficiency of Plate Fin-Tube Heat Exchangers under Partially and Fully Wet Conditions”, International Journal of Thermal and Fluid Sciences, Vol.11, No. 3, PP.249-254. (EI)
  73. Lin, C. N. and Jang, J. Y., 2002, “Conjugate Heat Transfer and Fluid Flow Analysis in Fin-Tube Heat Exchangers with Wave-Type Vortex Generators A Two-Dimensional Fin efficiency Analysis of Combined Heat and Mass Transfer ”,  Journal of  Enhanced Heat Transfer, Vol.9, , PP.132-136. (SCI & EI)
  74. Cheng, H. P., Chyou, C. K. and Jang, J. Y., 2003, “Three-Dimensional Flow Analysis of Turbomolecular Vacuum Pump”, International Journal of  Transport Phenomena, Vol. 5, PP. 143-153.. (EI)
  75. Leu, J. S., S. L., Chen and Jang, J. Y., 2003, “Heat Transfer and Fluid Flow in Rectangular Fin and Elliptic Tube Heat Exchangers under Dry and Dehumidifying Conditions ”,Journal of Enhanced Heat Transfer, Vol.11, No. 1, PP.43-60. (SCI & EI)
  76. Jang, J. Y.,  Lin, C. N. and Chen, S. L. 2004 “Two-Dimensional Fin Efficiency Analysis of a Rectangular Fin attached to an Elliptic Tube”, Chinese Journal of Heating, Refrigerating and Air Conditioning, Vol. 26, No. 3 PP. 74-78.
  77. Leu, J. S., Wu, Y. H. and . Jang, J. Y., 2004, “Heat Transfer and Fluid Flow Analysis in Plate-fin and Tube Heat Exchangers with a Pair of Block Shape Vortex Generators”, International Journal of Heat and Mass Transfer, Vol.47,  PP. 4327-4338.(SCI & EI)
  78. Jang, J. Y.,  Lin, C. W., Lee, M.J. and Leu, J. S. 2005 “Heat Transfer Enhancement by Applying Electric Fields”, Chinese Journal of Heating, Refrigerating and Air Conditioning, Vol. 32,  PP. 74-84.
  79. Lin, C. W. and Jang, J. Y., 2005, “3-D Numerical Heat Transfer and Fluid Flow Analysis in Plate-Fin and Tube Heat Exchangers with Electrohydrodynamic Enhancement,  Heat and Mass Transfer, Vol.41, PP. 583-593. (SCI & EI)
  80. Lin, C. W. and Jang, J. Y., 2005,3-D Numerical Micro Cooling Analysis for an Electrohydrodynamic Micro-pump, Sensors and Actuators, Part A: Physical, Vol.122,  PP. 167-176.(SCI & EI)
  81. Jang, J. Y,Hsieh, C. T.,2005,”Effect of Air inlet Angle on the thermal-Hudraulic Characteristoics for a Louver heat exchanger”,Chinese Engineering Journal, Vol.13, No.2, pp. 40-51。-
  82. Leu, J. S., Jang, J. Y.  and Chou Y. , 2006, “Heat and Mass Transfer for Liquid Film Evaporation along a Vertical Plate Covered with a Thin Porous Layer”, International Journal of Heat and Mass Transfer, Vol. 49, pp. 1937-1945.(SCI & EI)
  83. Hsieh, C. T. and. Jang, J. Y., 2006, “3-D Thermal-Hydraulic Analysis for Louver Fin Heat Exchangers with Variable Louver Angle”, Applied Thermal Engineering, Vol. 26, pp.1629-1639. (SCI & EI)
  84. Jang, J. Y., 2006, “Experimenatal and Numerical Thermal-HydraulicAnalysis in Plate-Fin and Tube Heat Exchangers with Electrohydrodynamic Enhancement” Engineering Science & Technology Bulltin, NSC. Vol. 88, pp.144-149.
  85. Jang, J. Y. and Chu, Y. W,2006,”Effects of Water Spray on the Thermal-Hydraulic Analysis of Compact  Heat Exchangers”,Chinese Engineering Journal, Vol.14, No.2, pp. 63-69。
  86. Jang, J. Y. and Hsu, C. T., 2007, "Effects of magnetohydrodynamics on the Vortex Instability of Natural Convection Flow over a Horizontal Plate in a Saturated Porous Medium," Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No.1, PP.6170. (EI)
  87. Jang,J. Y. and Chiu, Y. W, 2007, “Numerical and Experimental Thermal Analysis for a Metallic Hollow Cylinder Subjected to Step-Wise Electro-Magnetic Induction Heating”, Applied Thermal Engineering, Vol. 27, pp. 1883-1894. (SCI & EI)
  88.  Hsieh, C. T. and. Jang, J. Y., 2007, “3-D Thermal-Hydraulic Analysis for Airflow over Radiator and Engine Room”, International Journal of Automotomive Technology, Vol. 8, No. 5, pp. 659-666. (SCI & EI)
  89. Chien, C. H and Jang, J. Y., 2007,” Numerical and Experimental Studies of Thin Liquid Film Flow between Two Forward-Rollers Journal of Mechanical Science and Technology. Vol, 21, pp. 1892-1900. (SCI & EI)
  90. Chien, C. H. ,Jang, J. Y., Y. H. Chen and S. C. Wu 2008, “3-D Numerical and Experimental Analysis for Airflow within a Passenger Compartment”, International Journal of Automotomive Technology, Vol. 9, No. 4, pp. 437-445. (SCI & EI)
  91. Leu, J. S. and Jang, J. Y., 2008,” Effect of a Magnetic Field on Vortex Instability of Natural Convection Flow over a Horizontal Plate with Blowing and Suction”, Journal of Chinese Institute of Engineers, Vol.31, No. 5, PP. 879-884. (SCI & EI)
  92. Chien, C. H and  Jang,J. Y., 2008, “3-D Numerical and Experimental Analysis of a Built-in Motorized High Speed Spindle with a Helical Water Cooling Channel “, Applied Thermal Engineering, Vol. 28, pp. 2327-2336. (SCI & EI)
  93. Chiu, Y. W. and  Jang,J. Y.,2009, “3-D Numerical and Experimental Analysis for Thermal-Hydraulic Characteristics of Air Fow Inside a Circular Tbe with Different Tube Inserts”, Applied Thermal Engineering, Vol. 29, pp. 205-258. (SCI & EI)
  94. Jang, J. Y. and Hsu, C. T., 2009, "Vortex Instability of MHD Natural Convection Flow over a Horizontal Plate in a Porous Medium, "Computers and Fluids, Vol. 38,, PP.333-339. (SCI &EI)
  95. Jang, J. Y and P. Y. Chen, 2009”Reverse Roll Coating Flow with Non-Newtonian Fluids”, Communications in Computational Physics, Vol. 6, No. 3, pp. 536-552. (SCI &EI)
  96. Lie, K. N, Chiu, Y. M and Jang, J. Y., 2009, “Ribbing Instability of  Forward Roll Coating”, Journal of Mechanics, Vol. 25, No. 2,  PP. 167-175 (SCI &EI).
  97. Jang,J. Y. and Chiu, Y. W.  2009, “3-D Transient Conjugated Heat Transfer and Fluid Flow Analysis for the Cooling Process of Sintered Bed”, Applied Thermal Engineering, Vol. 29, pp. 2895-2903(SCI & EI).
  98. Leu, J. S., Jang, J. Y. and Chou W. C. , 2009, “Convection Heat and Mass Transfer along a Vertical Heated Plate with Film Evaporation in a Non-Darcian Porous Medium”, International Journal of Heat and Mass Transfer, Vol. 52, pp. 5447-5450.(SCI & EI).
  99. Wang, X.-D , Huang, Y. X. , Cheng C.-H. and  Jang, J Y., 2009 “Flow Field Optimization for Proton Exchange Membrane Fuel Cells with Varying  Channel Heights and Widths”., Electrochimica Acta, Vol. 54  pp. 5522–5530. (SCI & EI).
  100. Jang, J. Y. and Hsu, C. T., 2009, "Hall Effect on the Heat and Mass Transfer with MHD Natural Convection from a Vertical Plate in Porous Medium, "Journal of the Chinese Society of Mechanical Engineers, Vol. 30, No.5, pp..371-380. . (SCI & EI)
  101. Yeh, T. H, Jang, J. Y., Chen, Y. B. and Wang, D. H,2010“Numerical Modeling and Design of an Inspection Device with Thermoelectric Coolers for the Coke Oven“ , Key Engineering Materials, Vol. 419-420, pp.29-32 (EI)
  102. Jang, J. Y, Cheng, C. H.  and Hwang, Y. X., 2010, “Optimal Design of Baffles Locations with Interdigitated Flow Channels of a Centimeter-Scale Proton Exchange Membrane Fuel Cell”, International Journal of Heat and Mass Transfer, Vol. 53, pp. 732-743.(SCI & EI).
  103. Jang, J. Y, Cheng, C. H.  and Hwang, Y. X., 2010, “Optimization of Channel Width Distribution of a Gas Flow Field by Integrating Computational Fluid Dynamics Code with a Simplified Conjugate-Gradient Method”, Energy & Fuels, Vol. 24, pp. 570-580.(SCI & EI)
  104. Wang,  X. D. Huang, Y. X. , Cheng, C.H, Jang, J. Y. , Lee, D. L., Yan W.-M and Su,  A.,2010 “An Inverse Geometry Design Problem for Optimization of Single Serpentine Flow Feld of PEM Fuel Cell”, International Journal of Hydrogen Energy, Vol. 35, pp. 4247-4257.(SCI & EI)
  105. Jang, J. Y, Cheng, C. H.  and Hwang, Y. X., 2010, “The Effects of Geometric and Operating Conditions on the Hydrogen Production Performance of a Micro Methanol Steam Reformer”, Chemical Engineering Science, Vol. 65, PP. 5495–5506. (SCI & EI)
  106. Jang*, J. Y.; Wu, J. Y.; Tsai, S. H; 2010, “3-D Quasi-Steady State Heat Transfer Analysis for an Air-Cooled Motorcycle Engine”. Advanced Materials Research, Vol. 129, PP. 1322-1325. (EI).
  107. Huang, Y.X. , Cheng*, C.H. , Wang, X.D. and Jang, J.Y. 2010, “Effects of Porosity Gradient in Gas Diffusion Layers on Performance of Proton Exchange Membrane Fuel Cells”. Energy, Vol. 35 , PP. 4786-4794. (SCI).
  108. Leu, J. S., Jang, J. Y. and Chou W. C., 2011  “Effects of non-Darcian and inlet conditions on the forced convection along a vertical plate with film evaporation”, accepted for publication inHeat Transfer Engineering, Vol. 32 , PP. 981–987(SCI & EI)
  109. Jang, J.Y. and Tsai, Y.C.,2011, Optimum Louver Angle Design for a Louvered Fin Heat Exchanger. International Journal of the Physical Sciences, Vol. 6(28), PP. 6422-6438.(SCI).
  110. Leu, J. S., Jang, J. Y. and Chou W. C. and Leu, J. S., 2012  “Natural convection in a fluid/porous region heated from below with a conductive partition”, Journal of Thermophysics and Heat Transfer, Vol. 26, No. 2, PP. 367-373.(SCI)
  111. Jang, J. Y, Cheng, C. H.  and W. T. Liao and Hwang, Y. X. , 2012, “Experimental and Numerical Study of Proton Exchange Membrane Fuel Cell with Spiral Flow”, Applied Energy(SCI).
  112. Hsieh, C. T. and. Jang, J. Y., 2012, “Parametric Study And Optimization of Louver Finned-Tube Heat Exchangers by Taguchi Method” Applied Thermal Engineering, Vol. 42, PP. 101-110.(SCI)  
  113. Jang, J. Y, Cheng, C. H.  and W. T. Liao and Hwang, Y. X. , 2012, “Experimental and Numerical Study of Proton Exchange Membrane Fuel Cell with Spiral Flow”, Applied Energy, Vol.99, PP. 67-79 (SCI)
  114. Jang, J. Y, Cheng, C. H.  and Hwang, Y. X. , 2012, “The Three-Dimensional Simulation and Optimization of an Integrated Power System for Reformer-PrOx-Fuel Cell Modeling”, International Journal of Hydrogen Energy, Vol. 3 7, PP.13797-13805.
  115. Jang, J.Y, Cheng, C. H, Liao, W. T, Huang, Y. X., and Tsai, Y. C, 2012, “Experimental and numerical study of proton exchange membrane fuel cell with spiral flow channels”, Applied Energy, Vol.99, pp. 67-79.(SCI) 
  116. Jang*, J.Y., Tsai, Y.C. and Huang, Y.C. 2012, “Optimal Design of the Heat Spreader Applied Thermoelectric Module for Waste Heat Recovery”. Advanced Science Letters, Vol. 14, PP. 253–257. (SCI). 
  117. Jang, J. Y.and Tsai , Y. C, , 2013, “Optimization of Thermoelectric Generator Module Spacing and Spreader Thickness Used in a Waste Heat Recovery System , Applied Thermal Engineering, Vol. 51, pp. 677-689(SCI)
  118. Jang, J. Y.and Tsai , Y. C, 2013, “A Study of 3-D Numerical Simulation and Comparison with Experimental Results on Turbulent Flow of Venting Flue Gas Using Thermoelectric Generator Modules and Plate Fin Heat Sink”, Energy, Vol. 53, pp. 270-281(SCI)
  119. Jang*, J.Y., Hsu, L.F. and Leu, J.S. 2013, “Optimization of the Span Angle and Location of Vortex Generators in a Plate-Fin and Tube Heat Exchanger”. International Journal of Heat and Mass Transfer, Vol. 67,PP. 432-444. (SCI).
  120. Jang J.Y.and Chen C.C. 2013, Optimization of the louver angle and pitch for a louver finned and tube heat exchanger. International Journal of Physical Sciences, Vol. 8(43), PP. 2011-2022(SCI)
  121. Jang*, J. Y., Lin, C. N, Lee, C. Y and Wang ,C. H. 2014, “Three Dimensional Analysis of the Slab Reheating Furnace”. Applied Mechanics and Materials, Vol. 610, PP. 1029-1033. (EI).
  122. Huang, J. B, Jang*, J. Y., Lin, C. N, and Wang, C. H. 2014, “2-D Transient Radiative Heat Transfer Analysis on the Slab in a Walking-Beam-Type Reheating Furnace”. Applied Mechanics and Materials, Vol. 610, PP. 993-997. (EI).
  123. Huang ,Y X., Jang, J. Y., Cheng ,C. H. 2014, “Fractal Channel Design in a Micro Methanol Steam Reformer”. International Journal of Hydrogen Energy, Vol. 3 9, PP. 1998-2007. (SCI).
  124. Jang, J. Y.and Tseng, C. Y. 2015, “Experimental and Numerical Analysis of Built-In Thermoelectric Generator Modules with an Elliptical Pin-Fin Heat Sink”. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Vol. 9, No. 5, PP. 610-615.
  125. Jang, J. Y.and Huang, J. B. 2015, “Optimization of a slab heating pattern for minimum energy consumption in a walking-beam type reheating furnace”. Applied Thermal Engineering, Vol. 35, PP. 213-221.(SCI).
  126. Huang ,Y X., Jang,J. Y., Cheng,C. H. (2014). Fractal Channel Design in a Micro Methanol Steam Reformer. International Journal of Hydrogen Energy, Vol. 39, PP. 1998-2007.(SCI).
  127. Huang, J. B, Jang*, J. Y, Lin, C. N, and Wang, C. H. (2014). 2-D Transient Radiative Heat Transfer Analysis on the Slab in a Walking-Beam-Type Reheating Furnace. Applied Mechanics and Materials, Vol. 610, PP. 993-997.(EI).
  128. Jang*, J. Y., Lin, C. N, Lee, C. Y and Wang, C. H. (2014). Three Dimensional Analysis of the Slab Reheating Furnace,  Applied Mechanics and Materials, Vol. 610, PP. 1029-1033.(EI).
  129. Huang ,Y X., Jang,J. Y., Cheng,C. H. (2014). Fractal Channel Design in a Micro Methanol Steam Reformer,  International Journal of Hydrogen Energy, Vol. 39, PP. 1998-2007.(SCI).
  130. Jang*, J. Yand Huang, J. B.(2105) “ Optimization of a slab heating pattern for minimum energy consumption in a walking-beam type reheating furnace”, Applied Thermal Engineering,Vol. 35, PP. 213-221.(SCI).
  131. Jang*, J. Y  and Tseng, C. Y.(2015)” “Experimental and Numerical Analysis of Built-In Thermoelectric Generator Modules with an Elliptical Pin-Fin Heat Sink”.International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Viol. 9, No. 5, PP. 610-615.

 

 

 (B) 研討會論文

  1. Jang, J. Y. and Lin, C. N., 1986, "Interfacial Effects on the Growth of Spherical Crystal Nuclei in Subcooled Liquid," 1986 American Society of Mechanical Engineers Winter Annual Meeting, Anaheim, California, U.S.A., Dec. 7-12, ASME paper No. 86/WA/HT-7.
  2. Jang, J. Y. and Chen, C. N., 1986, "Natural Convection in an Inclined Partitioned Porous Cavity," 10th Nat. Con. on Theoretical and Applied Mechanics, Kaohsiung, Taiwan, R.O.C., Nov. 22-23, PP. 79-89.
  3. Jang, J. Y., Chang, C. C. and Shieh, S. K., 1986, "Thermodynamic Solutions of Finite Width Journal Bearing with Non-Newtonian Lubricants," 10th Nat. Conf. on Theoretical and Applied Mechanics, Kaohsiung, Taiwan,  Nov. 22-23, PP. 575-586.
  4. Jang, J. Y. and Chen, M. H., 1987, "Combined Forced and Free Convective Flows of Cold Water over a Vertical Flat Surface," American Society of Mechanical Engineers,6th International Symposium on Offshore Mechanics and Arctic Engineering, Houston, Texas, U.S.A., March 1-6, ASME paper No, OMAE-87-61.
  5. Cheng, M. J. and Jang, J. Y., 1987, "Thermal Instability of a Horizontal Porous Layer of Cold Water," 4th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Hsinchu, Taiwan, Dec. 12, PP. 355-366,
  6. Jang, J. Y. and Chen, C. N., 1987, "Natural Convection in a Rectangular Porous Enclosure with a Vertical Conductive Partition," International Symposium on Natural Circulation, American Society of Mechanical Engineering, Winter Annual Meeting, Boston, MA., U.S.A. , Dec. 13-18.
  7. Jang, J. Y. and Chang, W. J., 1988, "Maximum Density Effects on Vortex Instability of Buoyancy-Induced Flow Adjacent to an Inclined Surface in Porous Media," American Society of Mechanical Engineers, 7th International Symposium on Offshore Mechanics and Arctic Engineering, Houston, Texas, U.S.A., Feb. 7-12, ASME paper No. OMAE-88-547.
  8. Chang, W. J. and Jang, J. Y., 1989, "The Flow and Vortex Instability of an Inclined Natural Convection in Cold Water," Proceedings of the 1989 International Symposium on Cold Regions Heat Transfer, Sapporo, Japan, June 28-30, PP. 59-66.
  9. Chang, C. C. and Jang, J. Y. , 1990, "Adiabatic Solutions for a Plane Slider Bearing with Non-Newtonian Lubricants," Japan International Tribology Conference, Nagoya,  Japan, Oct. 29- Nov. 1.
  10. Jang, J.Y. and Leu, J. S., 1991,"The Computer Aided Design of Steam Surface Condensers," Eurotherm Seminar No. 18, Design and Operation of Heat Exchangers, Hamburg, Germany, Feb. 27- March 1.
  11. Lee, S. S., Chang, W. J. and Jang, J. Y., 1991, "Performance Studies of an Intermittent Solar Dehumidifier/Water Heater," 11th Annual Meeting & Workshop Solar Energy Society of R. O.C., Taipei, Taiwan, PP.1-9.
  12. Leu, J. S. and Jang, J. Y., 1991, "The Computer-Aided Design of Steam Power Plant Feedwater Heater,"8th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Taipei, Taiwan, Nov. 24, PP. 291-298.
  13. Chang, Y. R. and Jang, J. Y., 1991," The Computer-Aided Design of Shell and Tube Heat Exchangers," 8th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Taipei, Taiwan, Nov. 24, PP. 299-306.
  14. Lie, K. N. and Jang, J. Y., 1992, "Natural Convection in a Horizontal Concentric Porous Annulus with a Diathermal Partition," Proceedings of the International Conference on Computational Methods in Engineering, Singapore, Nov. 11-13, PP. 747-754.
  15. Chang, W. J., Jang, J. Y. and Li, S. S., 1992, "Performance Test and Simulation of the Integral Solar Desiccant Hot Water System", 9th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, Nov. , PP. 537-546.
  16. Leu, J. S. and Jang, J. Y., 1992, "The Computer-Aided Design of Shell and Tube Condensers", 12th Annual Meeting & Workshop Solar Energy Society of R.O.C., Taichung, Taiwan,  Dec 11-12, PP. 51-61.
  17. Leu, J. S. and Jang, J. Y., 1993, "Variable Viscosity Effects on the Vortex Instability of Free Convection Boundary Layer Flow over a Horizontal Uniform-Heat-Flux Surface in a Saturated Porous Medium," Proceedings of 6th International Symposium on Transport Phenomena in Thermal Engineering, May 9-13, Seoul, Korea, pp. 203-208.
  18. Lin, M. J. and Jang, J. Y., 1993, "Computer Aided Heat Exchanger Design of a Tunnel Dryer," 10thNational Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Hsinchu, Taiwan, Dec. 12 , PP. 251-260.
  19. Jang. J. Y., Lin, C. D. and Show, H. J., 1994, "Transient Heat and Mass Transfer by Natural Convection in a Rectangular Porous Enclosure," Proceedings of International Conference on Fluid and Thermal Energy Conversion, Dec. 12-15, Bali, Indonesia, PP. 295-300.
  20. Jang, J. Y. and Wu, J. J., 1995,"Natural Convection in a Porous Enclosure Heated from Below with a Conductive Partition,: Proceedings 0f the 4th ASME/JSME Thermal Engineering Joint Conference, March, 19-24, Maui, Hawaii, U.S.A., Vol. 3, pp. 431-438.
  21. Chen, P. Y., Wang, C. C.  Jang, J. Y. and Chang, W. R., 1995, "Air Side Performance of Convex-Louver Fin Heat Exchangers," Advanced in Enhanced Heat/Mass Transfer and Energy Efficiency, 1995 American Society of Mechanical Engineers Winter Annual Meeting, San Francisco, California, U.S.A., Nov. 12-17.
  22. Chen, P. H., Jang, J. Y. and Lin, J. W., 1995, "The Numerical Simulation of the Flow Field of the Inlet Pipe for a Four-Stroke Motorcycle Engine", 12th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Chia-yi, Taiwan, Nov. 15, PP. 577-586.
  23. Liu, C. K. and Jang, J. Y., 1995, "Performance Test of Circular Finned-Tube Heat Exchangers," 19th Nat. Conf. on Theoretical and Applied Mechanics, Taoyuan, Taiwan, Dec. 8-9, Vo. 1, PP. 1-8.
  24. Jang, J. Y., Chang, W. J. and Lin, M. S., 1996, A Numerical Analysis of Three-Dimensional Turbulent Fluid Flow and Heat Transfer in Plate-Fin and Tube Heat Exchangers, Proceedings of the 5th International Conference on Numerical Grid Generation in Computational Fluid Dynamics, Starkville, Mississippi State University, U.S.A., April 1-5, PP. 963-972.
  25. Jang, J. Y. and Li, B. C., 1996, “A Numerical Analysis of Two-Dimensional Laminar Flow over an Elliptic Tube Bank”, 4th International Symposium on Heat Transfer, Beijing, China, Oct. 7- 11.
  26. Lin, J. W. and Jang, J.Y., 1996, “Numerical and Experimental Studies for the Intake and Exhaust Pipes of a Four-Stroke Motor Cycle Engine,13th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Taipei, Taiwan, Nov. 7-8, PP. 106-113.
  27. Jang, J.Y. and Lai, J. T., 1997, “Numerical and Experimental Analysis of Heat Transfer and Fluid Flow in 3-D Circular Finned-Tube Heat Exchangers”, Proceedings of International Conference on Computational Fluid Dynamics in Mineral & Metal Processing and Power Generation, Clayton, Victoria, Australia, July 3-4, PP. 189-196.
  28. Jang, J.Y., Wong, D. K. and Tsai, H. S., 1997, “Three-Dimensional Intake and Exhaust Port Flow Simulation in a Four-Strokes Spark Ignition Engine”,14th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Chung-Li, Taiwan, Dec. 12-13, PP. 456-463.
  29. Liaw, J. S., Jang, J. Y. and Wang, C. C., 1998“ A Rationally Based Model for Air-Cooled Evaporator and water Cooling Coils; Accounting the Effect of Partial Wet Surface Conditions”, Proceedings of International Conference and Exhibit on Heat Exchangers for Sustainable Development, Lisbon, Portugal, June 14-18, PP.293-312.
  30. Jang, J.Y. and Tsai, H. S., 1998, “3-D Numerical Simulation of In-Cylinder Flow during the Intake Stroke for a Four-Strokes Engine”, 8th International Symposium on Flow Visualization, Sorrentto, Italy, Sept. 1-4.
  31. Jang, J.Y. and Chyou, C. K., 1999, “Transient 3-D Flow in a Cylinder during Intake-Compression for a 4-Stroke SI Engine”, Proceedings of the International Conference on Computational Heat and Mass Transfer, Magusa, North Cyprus, Apr. 26-29. PP. 377-387.
  32. Jang, J.Y., Su, F. Y. and Lin, C. N. ,  1999, “3-D Numerical Analysis of Heat Transfer and Fluid Flow in a Plate Heat Exchanger” ,Proceedings of the Asia-Pacific Conference on the Built Environment, Taipei, Taiwan, Nov. 29- Dec. 2., PP. A-8-1-A-8-12.
  33. Yan, Y. S. and Jang, J.Y., 1999, “Heat Transfer and Fluid Flow Analysis of the Vaporization of Liquefied Natural Gases”, Proceedings of the 1999 Symposium on Transport Phenomena and Applications, Kaohsiung, Taiwan, Nov. 26-27, PP. 331-334.
  34. Dai, C. K. Jang, J.Y. and Shyu, D. Y., 2000, “Analysis and Performance Test of Low Noise Transformer Oil Cooler, Proceedings of the 2000 Symposium on Transport Phenomena and Applications, Taipei, Taiwan, Dec. 2, PP. 317-320.
  35. Lin, C. N. and  Jang, J.Y., 2000, “3-D Thermal-Hydraulic Conjugate Analysis in Rectangular Offset Strip Fin Type Heat Exchangers”,17th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, Dec. 8-9, Vol.1, PP. 529-536.
  36. Jang, J.Y. and Wang, Z. J., 2001, “Heat and Mass Transfer Performances of Closed-Type Cooling Tower”, Proceedings of the International Conference on Advanced in Computational Heat Transfer, Palm Cove, Queensland, Australia, May 20-25. PP. 269-276.
  37. Lin, C. N. and Jang, J.Y., 2001, “Heat and Fluid Flow Analysis in Rectangular Offset Strip Fin Type Heat Exchangers”,7th REHVA (Representatives of European Heating and Ventilating Associations) World Congress, Napoli, Italy, Sep 15-18.
  38. Ay, H.,  Jang, J.Y, and Yeh, J. N., 2001, “Local Heat Transfer Measurements of Plate Finned-tube Heat Exchangers by Infrared Thermography”,18th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Taipei, Taiwan, Dec. 7-8, Vol.1, PP. 621-627.
  39. Jang, J.Y., Shyu, D, Y and Shyu, H,. Y., 2001, “The Heat Transfer Performance Test of Finned-Tube Air Coolers, Proceedings of the 2001 Symposium on Transport Phenomena and Applications/ The 4th Taiwan-Singapore Joint Symposium on Environmental Protection Technology, Taipei, Taiwan, Dec. 7, PP. 385-388.
  40. Jang, J.Y. and Chien, C. H., 2002, “3-D Heat Transfer Analysis of Built-In Motorized High Speed Spindle with Helical Cooling Channel”, Proceedings of 1stInrternational Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Skukuza, Kruger National park, South Africa, April 8-10, PP. 1019-1024.
  41. Jang, J.Y., Yeh, J. N. and Ay, H., 2002, “Three-Dimensional Thermal-Hydraulic Analysis in Slit 3-D Finned -Tube Heat Exchangers”, Proceedings of 4thInternational Symposium on Computational Technologies for Fluid/Thermal/Chemical/Stress Systems with Industrial Applications, Vancouver, Canada, August 4-8, PP. 315-322.
  42. Lin, S. J. Jang, J.Y. and Leu, J. S., 2002, “The Development and Analysis of Simulation Software for the Diffusion of the Pollutants when the Leakage of the Petroleum Occurs”, Proceedings of the 2002 Symposium on Transport Phenomena and Applications/Solid-Liquid Separation Forum, Taipei, Taiwan, Nov. 22, PP. 639-642.
  43. Jang, J. Y. and Lin, C. N., 2003, 2003, “Three-Dimensional Heat and Flow Analysis of Fin-Tube Heat Exchangers with Wave-Type Vortex Generators”, Proceedings of the 4th International Conference on Cold Climate - Heating, Ventilating and Air-Conditioning, June 15-18, Trondheim, Norway.
  44. Jang, J.Y., Chen, S. L. and Leu, J. S.., 2003Air Side Thermal-Hydraulic Characteristics of Rectangular  Fin and Elliptic Tube Heat Exchangers under the Dehumidifying Condition”, Proceedings of 74th International Symposium on Ventilation for Contaminant Control,  Sapporo, Japan, August 5-8, PP. 461-466.
  45. Jang, J.Y., Shyu, Y. S. and Chien, J. H., 2003, “The Thermal-Hydraulic Performance Analysis for the Power Plant Steam Condenser”, Proceedings of the 2003 Symposium on Transport Phenomena and Applications, Taipei, Taiwan, Nov. 7.
  46. Jang, J.Y, Chen, S. M and Chiu, Y. W., 2003, “The Thermal-Hydraulic Performance Test and the 3-D Numerical Analysis of Car Radiator Fins,20th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Taipei, Taiwan, Dec. 5-6.
  47. Tu, C. H, Lin, C. N. and   Jang, J.Y., 2003, “3D Heat and Mass Transfer Analysis and Flow Channels Design & Visualization for Proton Exchange Membrane Fuel Cell,20th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Taipei, Taiwan, Dec. 5-6.
  48. Chien, J. H. and Jang, J.Y., 2004, “3D Heat and Fluid Flow Analysis of Precision Linar Motorl, 2th Refrigeration , Air-Conditioning and Energy  National Conference , Taichung, Taiwan, July 5-6, PP.331-341.
  49. Lin, C. W., Lee, M. J. and Jang, J. Y., 2004, “Heat Transfer Enhancement in Oval Finned-Tube Heat Exchangers Utilizing Electric Fields Effects”, Proceedings of 13thInternational Heat Pipe Conference,  Shanghai, China, Sept. 20-25, PP. 343-348.
  50. Wu, Y. H., Jang, J. Y. and Leu, J. S., 2004, “Experimental and Numerical Investigations of Flow Structure and Heat Transfer in Fin-Tube Heat Exchanger with V-shape Vortex Generators,21th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, Nov. 26-27.
  51. Lin, C. W. and Jang, J. Y., 2005, “3-D Numerical Analysis for Fluid Flow and Heat Transfer in a Micro Chip by Using an Electro-Hydrodynamic Micro- Pump”, Proceedings of  3rd International Conference on Microchannels and Minichannels, June 13-15, Toronto, Ontario, Canada.
  52. Jang, J.Y. and Chien, C. H., 2005, “3 Experimental and 3-D Numerical Analysis of Heat Transfer on Car Passenger Thermal Comfort”, Proceedings of 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi’an, China, July 3-6.
  53. Leu, J. S., Chou, Y. and Jang, J. Y., 2005, “Heat and Mass Transfer for Liquid Film Evaporation along an Inclined Plate Covered with a Porous Layer,22th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Chung-Li, Taiwan, Nov. 25-26.
  54. Chen, P. Y., Chien, J. H and Jang, J. Y., 2005, “The Thermal Hydraulic and Thermal Stress Analysis of Linear Motors,22th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Chung-Li, Taiwan, Nov. 25-26.
  55. Hsieh, C. T and Jang, J. Y., 2006” 3-D Thermal-Hydraulic Analysis for Airflow over a Radiator and Engine Compartment” The 17th International Symposium on Transport Phenomena, 4-8 September, 2006, Toyama, Japan.
  56. Chien, C. H and Jang, J. Y. and. Su , C. C , 2006” 3-D  Turbulent Heat and Fluid Flow Analysis of a Built-in motorized High Speed Spindle with Helical Cooling Channel” The 17th International Symposium on Transport Phenomena, , Toyama, Japan , September 4-8.
  57. Jang, J. Y. and Chen, P. Y.  2006, “3-D Thermal Stress Analysis for A wafer ”,23th National Conference on Mechanical Engineering, Chinese Society of Mechanical Engineers, Tainan, Taiwan, Nov. 24-25.
  58. Chen, P. Y., Chien, J. H and Jang, J. Y., 2006, “3-D Heat, Fluid Flow and Thermal Stress Analysis in a Linear Motor with a Water-Cooling Channel”, Proceedings of International Conference on Manufacturing Science and Technology, , Melaka, Malaysia, August 28-30.
  59. Chen, P. Y. and Jang, J. Y., 2007, “Numerical Simulation for Forward Roll Coating Process with Non-Newtonian Fluids”, The 9th Asian Symposium on Visualization, Hong Kong, June 4-8.
  60. Chiu, Y. W, Y. X. Li and Jang, J. Y., 2007, “Numerical and Experimental Analysis of Elliptic Finned-Tube Heat Exchangers under Misted Conditions, Proceedings of Clima 2007 Well Being Indoors, Helsinki, Finland , June 10-14.
  61. Jang, J. Y. and Chen, P. Y.  2007, “Thermal Efficiency Analysis of Gas-Gas Heater”, 24th National Conference on Mechanical Engineering, 24th National Conference on Chinese Society of Mechanical Engineers, Taoyuan, Taiwan, Nov. 23-24.
  62. Chiu, Y. W and Jang, J. Y., 2007, “Numerical and Experimental Studies of Flow Field and Heat Transfer for High Temperature Exhaust Gas over In-Line Tube Banks, Proceedings of The 9th Asia Pacific Conference on the Built Environment Sustainable HVAC & R Technology, Bangkok, Thailand, Nov. 22-23
  63. Jang, J. Y., Cheng C. H., Huang Y. X., Wu Y. M., 2007, “PEM Fuel Cell Channel Width Optimization by integrating Computational Fluid Dynamics Code with Optimization Method, Proceedings of The 9th Asia Pacific Conference on the Built Environment: Sustainable HVAC & R Technology, Bangkok, Thailand, Nov. 22-23.
  64. Chen, P. Y. and Jang, J. Y., 2008, “Experimental and Numerical Analysis of Ribbing Phenomenon on Forward Roll Thin Film Coating”, The  8th Asia-Pacific Conference on Materials Processing, Guilin, China,  June 15-20.
  65. Lin, C. W. and Jang, J. Y., 2008, “3-D Numerical Analysis for Fluid Flow and Heat Transfer in a Micro Chip by Using an Electro-Hydrodynamic Micro- Pump”, Proceedings of 19th International Symposium on Transport Phenomena, August  17-20, Iceland.
  66. Jang,J. Y. ,Cheng,C. H, Hwang, Y. S,2008, “Optimal Design of PEM Fuel Cell with Interdigitated Flow Channels by Using Simplified Conjugate Gradient Method”, Fuel Cells Science and Technology, October 8-9, Kobenhavn, Denmark.
  67. Leu, J. S.,Jang, J. Y.  , Chou, W. C., 2008, “Effects of inlet conditions on forced convection flow with film evaporation in non-Darcian porous media”, The 15th National Computational Fluid Dynamics Conference, Kaohsiung, Taiwan, August 7-8.
  68. Jang, J. Y.  , Chou, W. C., Leu, J. S., 2008,“The non-Darcy effects on the heat and mass transfer of  liquid film evaporation problem”, The 25th National Conference on Chinese Society of Mechanical Engineers, Changhua, Taiwan, November 21-22.
  69. Huang, Y.X.,Cheng,C. H., Jang,J. Y.,King, S. C. ,  Lu,Z.X, Lee, C. I, 2008, “Optimal Design of Divergent and Convergent Manifold in a Micro-Reactor for Combustor” The Third National Conference on Hydrogen Energy and Fuel Cell, Tainan, Taiwan, November 14-15.
  70. Huang,Y.X. ,Cheng,C. H., Jang, J. Y. ,King, S. C., Lu,Z.-X., Lee, C.I. , 2008, “Optimal Design of Channel width in a Micro-Reactor for Combustor” The 25th National Conference on Chinese Society of Mechanical Engineers, Changhua, Taiwan, November 21-22.
  71. Jang,J. Y. ,Cheng,C. H, Hwang, Y. X,2008, Optimization of  Channel Width of a  Micro-Reformer by Using the Simplified  Conjugate-Gradient  Method” ”,Proceeding of  the International  Conference on EnvironmentDec 15-17, Peng, Malaysia.
  72. Leu, J. S.,Jang, J. Y.  and  Chou,W. C.,2009,“The non-Darcy Forecd Convection along a Vertical Plate with Film Evaporation”, Proceedings of6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi’an , China, July 11-15.
  73. Jang,J. Y. ,Cheng,C. H, Hwang, Y. X,2008, Optimization of  Channel Width of a  Micro-Reformer by Using the Simplified  Conjugate-Gradient  Method” ”,Proceeding of  the International  Conference on EnvironmentDec 15-17, Peng, Malaysia.
  74. Liao, W. T, Huang, Y. X., Jang, J. Y. and Cheng, C. H.,2009 “Novel Design of Proton Exchange Membrane Fuel Cell with a Spirial Flow Channel”, Proceedings of The 10thAsia Pacific Conference on the Built Environment: Green Energy for Environment, Kaohsiung, Taiwan , Nov. 5-6.
  75. Tsai, Y. C, Huang,  Y. X.Jang,  J.Y. and Cheng, C. H. , 2009 “Optimum  Design of Proton Exchange Membrane Fuel Cell with a Serpentine Flow Channel by Using the Simplified  Conjugate-Gradient  Method” ”,Proceedings of The 10th Asia Pacific Conference on the Built Environment: Green Energy for Environment, Kaohsiung, Taiwan , Nov. 5-6.
  76. Jang, J. Y.  , Chou, W. C., Leu, J. S., 2009,“The study of influence of porous material on the forced convection flow over a wetted plate”, The 26th National Conference on Chinese Society of Mechanical Engineers, Tainan, Taiwan, November 21-22.
  77. Chen, P. Y and Jang, J. Y. , 2009,“Experimental and Numerical Analysis of Non-Newtonian Effect on the Film Thickness and Ribbing Instability in Forward Roll Coating Process ”,The 26th National Conference on Chinese Society of Mechanical Engineers, Tainan, Taiwan, November 21-22
  78. Jang, J. Y.  , Chou, W. C., Leu, J. S., 2009,“The Study of Porous Medium in the Natural Convection Flow in an Enclosure Heated from Below”, The 33rd National Conference on Theoretical and Applied Mechanics, November 13-14, 2009, Miauli, Taiwan, November 13-14.
  79. Leu, J. S, Jang, J. Y.   and Chou, W. C. , 2009 “Natural Convection in  Partially Porous Cavities with a Conductive Horizontal partition” The 6th Pacific Symposium on Flow Visualization and Image Processing, Kaohsiung, Taiwan, Nov 16-19.
  80. Jang, J. Y.Hwang, Y. X and Cheng, C. H, ,2010, " The Optimization of Parallel Channel Patterns Design on Micro Methanol Steam Reformer “, Proceedings of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, ,August 1-5, 2010, Montreal, Canada.
  81. Jang, J. Y., Chou, S. C. and Huang, J. B, 2011 “  Numerical analysis of sintered Particle Trajectories in the Electrostatic Precipitator”, 2011 Asia-Pacific Power and Energy Engineering Conference, March 25-28, Wuhan, China. (EI) 
  82. Tsai, Y. C., Li, T. H., Jang, J. Y. and Hsu, L. F., 2011, “3-D Numerical Analysis for Rectangular Finned-Tube Heat Exchanger with Vortex Generators”, Proceedings of 18th Computational Fluid Dynamics Conferences, August 3-5, 2011, Yilan, Taiwan .
  83. Tsai, Y. C. and Jang, J. Y., 2011, “Optimization Analysis for Louver Fin Heat Exchangers” ,Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science, November 15-17, 2011, Bali, Indonesia. 
  84. Huang, J. B. and Jang, J. Y., 2011, “Numerical Investigation of Nanofluids Laminar Convective Heat Transfer through Staggered and In-Lined Tube Banks”, Proceedings of The 2011 2nd International Congress on Computer Applications and Computational Science, November 15-17, 2011, Bali, Indonesia. 
  85. Jang, J. Y. and Tsai Y. C., 2012, “Optimization of Spreader Spacing and Thickness for Thermoelectric Generators Modules for Waste Heat Recover”, Tenth International Conference on Advances and Trends in Engineering  Materials and their Applications, June 18 – 22,  2012, Montreal, Canada. 
  86. Tsai Y.C., Jang J.Y. and Wu C.W. Wu, 2012, “Three-dimensional Numerical and Experimental Study on Thermoelectric Generator Module” The 31st International & 10th European Conference on Thermoelectrics, 2012. July 9th-12th, 2012. Aalborg, Denmark
  87. Jian, J. H. and Jang, J. Y., 2013, “Performance of Thermoelectric Generator Module with Plate fin Heat Sink”,  The 32nd International Conference on Thermoelectrics , June 30 – July 4, 2013, Kobe, Japan(A)
  88. Jang, J. Yand Huang, J. C. (2014).” 3-D Numerical Heat Transfer for Confined Turbulent Twin Circular Jets Impinging on an Inclined Moving Plate” . Proceedings of ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada.\
  89. Lin,C. N, Luo,Y. P, Jang,J. Y, Wang, C. H., 2015,” A Novel Approach to Estimate the Optimum Zone Fuel Mass Flow Rates for a Walking Beam Type Reheating Furnace , 3nd International Workshop on Heat Transfer Advances for Energy Conservation and Pollution Control , October 16-19, 2015, Taipei, Taiwan.
  90. Jang, J. Y, Lee, Y. W, Lin, C. N and Wang, C. H ,2016, 3-D Transient Heat Transfer Analysis of Slab Heating Characteristics in a Reheating Furnace in Hot Strip Mills . 2016 International Conference on Advanced Material Science and Engineering, Shenzhen, China , January 8-10, 2016.
  91. Jang, J. Y, Lin, C. N, Chang, S. C. and Wang, C. H. ,2016, The 3-D Numerical Simulation of a Walking Beam Type Slab Heating Furnace with Regenerative Burners,  2016 International Scientific Conference on Engineering and Applied Science, May 24-26, Beijing, China.

 

(C)Other Publications【與工業界(不含國科會)建教合作案報告】

 

  1. 張錦裕, 1987, ”非牛頓潤滑劑於有限長頸軸承之性能電腦模擬解析研究”,中國石油公司煉製研究所。
  2. 張錦裕, 1989, ”潤滑劑在滾珠軸承內之彈液動潤滑分析”,中國石油公司煉製研究所。
  3. 張錦裕, 1989, ”電廠飼水加熱器及冷凝器之分析研究”,台灣電力公司綜合研究所。
  4. 張錦裕, 1990, ”潤滑劑應用於考慮粗度效應之軸潤滑性之電腦套裝軟體開發”,中國石油公司煉製研究所。
  5. 張錦裕, 1991, ”核能電廠熱交換器熱液動及機械強度之設計研究”,台灣電力公司核能技術處。
  6. 張錦裕, 1991, ”管線保溫材料設計軟體開發”,金屬工業發展中心。
  7. 張錦裕, 1992, ”點,線,面接觸時之潤滑性能電腦套裝軟體設計”,中國石油公司煉製研究所。
  8. 張錦裕, 1993, ”潤滑劑之壓力-黏度係數測定實驗研究”,中國石油公司煉製研究所。
  9. 邱澄彬,張錦裕, 1995, ”四行程汽油噴油引擎燃燒特性及其燃燒變異研究”,光陽工業股份有限公司。
  10. 張錦裕, 1996, ”四行程汽油引擎進排氣道流場分析”,光陽工業股份有限公司。
  11. 張錦裕, 1996, ”硬焊型板式油冷卻器電腦輔助設計軟體開發”,高力熱處理工業股份限公司。
  12. 張錦裕, 1997, ”四行程汽油引擎缸內之三維流場分析”,光陽工業股份有限公司。
  13. 張錦裕, 1998, ”空調用高效率多面式蒸發器之研發及測試”, 坤慧股份有限公司。
  14. 張錦裕, 1998, ”煉鋼製程板式油冷卻器性能改善研究”,中鋼公司新材料研究發展處能源環工組。
  15. 張錦裕, 1999, ”焚化爐空氣凝結器進口風道壓力降研究分析”, 丹麥Ansaldo Volund A/S Taiwan Branch, Tainan 股份有限公司。
  16. 張錦裕, 1999, ”低噪音變壓器油冷卻器之研發”, 世鴻工業股份有限公司。
  17. 張錦裕, 1999, ”台南焚化爐空氣凝結器熱效率研究分析”, 中興電工機械股份有限公司。
  18. 張錦裕, 1999, ”木石礦化板熱傳導係數之量測”, 維全興業有限公司。
  19. 張錦裕, 2000, ”氣球打氣筒之打氣性能評估”, 力城玩具實業有限公司。
  20. 張錦裕, 2001, ”八里焚化爐空氣凝結器熱效率改善研究分析”, 中興電工機械股份有限公司。
  21. 張錦裕, 2001, ”航空用熱交換器研究分析”,漢翔航空工業股份有限公司。
  22. 張錦裕, 2002, ”航空用燃油/潤滑油熱交換器研究分析”,漢翔航空工業股份有限公司。
  23. 張錦裕, 2002, ”乾燥爐內溫度場性能研究”,和冠机械股份有限公司。
  24. 張錦裕, 2002, ”汽車水箱及電子散熱器性能研究”,連冠企業股份有限公司。
  25. 張錦裕, 2002, ”添加劑處理效能即時監控系統之建立”,中國石油公司煉製研究所。
  26. 張錦裕, 蔡明祺,2003,”精密線型馬達邊端效應影響的評估分析及熱傳分析",工業技術研究機械工業研究所。
  27. 趙健祥,張錦裕,蔡南全,2003,”微投藥系統之開發與研究”,工業技術研究院。
  28. 張錦裕, 2004, ”水冷式電子散熱器性能研究”,連冠企業股份有限公司。
  29. 張錦裕, 2004, ”引擎室流場及冷卻系統模擬分析”,嚴慶齡工業發展基金會。
  30. 張錦裕, 2004, ”真空蒸汽室散熱器性能研究”,奧古斯丁科技股份有限公司。
  31. 張錦裕, 2004, ”汽車室內溫度分佈及乘員冷熱感預測分析(1/3)”,嚴慶齡工業發展基金會。
  32. 張錦裕, 2004, ”雙金屬料管感應加熱製程三維熱傳分析,中鋼公司新材料研究發展處。
  33. 張錦裕, 2005, ”汽車室內溫度分佈及乘員冷熱感預測分析(2/3)”,嚴慶齡工業發展基金會。
  34. 張錦裕,陳元方,2005, ”Physical mechanism and 3-D TCAD modeling capability for thermal and stress effects”,臺灣積體電路製造公司。
  35. 張錦裕, 2005, ”輥輪塗佈機之流場及流紋不穩定性分析”,中鋼公司新材料研究發展處。
  36. 張錦裕, 2006, ”汽車室內溫度分佈及乘員冷熱感預測分析(3/3)”,嚴慶齡工業發展基金會
  37. 張錦裕, 2006, ”管式復熱器熱流分析”,中鋼公司新材料研究發展處。
  38. 張錦裕, 2006, ”汽車熱負荷 佈及乘員冷熱感預測分析”,嚴慶齡工業發展基金會。
  39. 張錦裕, 2006, ”熱交換器性能研究”, 世鴻工業股份有限公司。
  40. 張錦裕, 2006, ”汽車水箱用風扇測試系統之開發與研究”, 台灣開億股份有限公司。
  41. 張錦裕, 2006, ”輥輪塗佈機之流紋轉印與流平機制研究”,中鋼公司新材料研究發展處。
  42. 張錦裕, 2007, ”汽車外部熱負荷對室內溫度分佈之影響及車體熱容之預測分析”,嚴慶齡工業發展基金會。
  43. 張錦裕, 2007, ”電廠煙氣熱交換器性能研究”,鴻漢企業有限公司。
  44. 張錦裕, 2007, ”燒結冷卻機熱交換性能研究”,中鋼公司新材料研究發展處
  45. 張錦裕, 陳寒濤,吳明勳,2008,”引擎缸內熱源分佈及燃燒研究分析”, 光陽工業股份有限公司。
  46. 張錦裕, 2008, ”電廠煙氣熱交換器殘餘壽命評估研究”,鴻漢企業有限公司。
  47. 張錦裕,陳玉彬,2008,”煉焦爐室攝影系統開發”,中鋼公司新材料研究發展處
  48. 張錦裕, 2008, ”冷卻系統(車體/電裝/引擎)整合匹配設計分析”, 光陽工業股份有限公司。
  49. 張錦裕, 2008, ”電廠煙氣熱交換器積垢問題改善及熱傳性能評估”,鴻漢企業有限公司。
  50. 張錦裕, 2009, ”靜電除塵器(EP)電場作用下之粉塵行徑模式研究”,中鋼公司新材料研究發展處。
  51. 張錦裕, 2009, ”高性能電腦機房冷凍空調系統及板鰭式熱交換器之研發”台達電子工業股份有限公司。
  52. 張錦裕, 2010, ”貨櫃型電腦機房空調系統研發及電腦輔助設計軟體開發”台達電子工業股份有限公司。
  53. 張錦裕, 2010, ”有機朗肯循環熱交換器之電腦輔助設計軟體開發”,中鋼公司新材料研究發展處。
  54. 張錦裕, 2011, ”高效率機櫃型冷卻系統之研發”台達電子工業股份有限公司。
  55. 張錦裕, 2011, ”廢氣煙道熱擷取暨熱電系統設計(1/2)”,中鋼公司新材料研究發展處。
  56. 張錦裕, 2012, ”廢氣煙道熱擷取暨熱電系統設計(2/2)”,中鋼公司新材料研究發展處。
  57. 張錦裕, 2013, ”微通道應用於精密空調電腦機房之研發”, 台達電子工業股份有限公司。
  58. 張錦裕, 2014, ”水道熱傳模擬分析MODEL發展”, 光陽工業股份有限公司。
  59. 張錦裕, 2014, ”冷卻水塔內外部流場模擬分析”, 太丞股份有限公司。
  60. 張錦裕, 2015, ”引擎冷卻水套設計準則之建立”, 光陽工業股份有限公司。
  61. 張錦裕, 2016, ”爐渣顯熱熱交換模擬工具建立,” ,中鋼公司新材料研究發展處。